ページ1に含まれる内容の要旨
EXCELL PRECISION CO., LTD.
User Manual
© Excell Precision Limited 2006. All rights reserved Worldwide.
The information contained herein is the property of Excell Precision Limited and is supplied
without liability for errors or omissions. No part may be reproduced or used except as
authorised by contract or other written permission. The copyright and the foregoing
restriction on reproduction and use extend to all media in which the inf
ページ2に含まれる内容の要旨
EXCELL PRECISION CO., LTD. TABLE OF CONTENT SAFETY PRECAUTION.......................................................................3 FEATURES AND SPECIFICATION..........................4 1-1 FEATURES............................................................................................................................4 1-2 SPECIFICATION.....................................................................................................................5 KE
ページ3に含まれる内容の要旨
EXCELL PRECISION CO., LTD. TRANSMISSION INTERFACE ............................... 24 7-1 OP-01 RS232 / RS485 SERIAL OUTPUT (WITH RTC)........................................................ 24 2 Pin Allocation of Rear Panel........................................................................................................................24 2 Connection Description (RS485) .................................................................................................
ページ4に含まれる内容の要旨
EXCELL PRECISION CO., LTD. BEFORE USING THE INDICATOR Thanks for purchasing EXCELL FM Mini-indicator. In order to operate smoothly, to last the durability, and to reduce the chance of breakdown for this product, please read the following instructions carefully. Safety Precaution & Turn off power before installing or disassembling. & Keep the product away from sunshine. The temperature range for operation is -10℃℃ ~ +40 . & To connect the ground is a must for this equipm
ページ5に含まれる内容の要旨
EXCELL PRECISION CO., LTD. Features and Specification 1-1 Features l Large and clear LCD (height 25.4mm × 10mm) l LED Backlight, more duration, more energy saving l Auto zero tracking l Weighing calibration in both kilogram and pound l High resolution switch function to display 10 times divisions l Weighing unit shift function & data accumulation function l Adjustable digital filter l Available in connecting with up to four 350-ohm load cells l Capable of connecting
ページ6に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 1-2 Specification Analog Specification ♦ Load Cell Current: DC 5V ±5% 60mA (Up to Four 350Ω Load Cells) ♦ Max. Load Cell Input Voltage: 16 mV ♦ Input Sensitivity: 0.12μV/D or more ♦ Conversion Rate: Approximately 100 times/sec. (max.) ♦ Resolution: 19 bits Digital Specification ♦ Display: LCD, 6 digits, height 25.4x10mm, LED backlight ♦ Display Frequency: 50 times/sec. (max.) ♦ Display Range:
ページ7に含まれる内容の要旨
EXCELL PRECISION CO., LTD. Keypad Operation Instruction Function Operation Description ENTER Press and hold , General Function Refer to Function F1 Setting Parameter Setting for details and then press Setting for decimal point, capacity, Weighing Adjust calibration division, zero tracking, and unstable Parameter Setting switch to ON detecting, etc. Refer to 5-1 Specification Setting for details. Refer to 5-2 Internal Weight Adjust calib
ページ8に含まれる内容の要旨
EXCELL PRECISION CO., LTD. Front & Rear Panels 3-1 Front Panel R +- TARE MOTION M+ GROSS PT ZERO TARE GROSS F2 F1 ENTER ESC NET + Indication: : Battery charged status : Battery charging status TARE : Tare status MOTION : Unstable weighing indication M+ : Accumulation status indication GROSS : Gross weight PT : Pre-tare Keypad: 1) Power ON / OFF. Press a
ページ9に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 3-2 Rear Panel 1 2 5 3 4 1. Battery Case 2. RS232/485 Input/Output 3. DC 9V Power Input 4. Calibration Switch 5. Load Cell Connect Socket 8 FM User Manual SME300000119
ページ10に含まれる内容の要旨
EXCELL PRECISION CO., LTD. Installation 4-1 Load Cell 5 4 3 2 1 9 8 7 6 Load cell cable Load cell EXC+ SEN+ SIG+ SIG- EXC- SEN- Shield 4-wired (5-wired) Load Cell 6-wired (7-wired) Load Cell Short Pin4&5 to connect with EXC+ Pin5 connects with EXC+ Short Pin2&3 to connect with EXC- Pin4 connects with SEN+ Pin1 connects with SIG+ Pin3 connects with EXC- Pin9 connects with SIG- Pin2 connect
ページ11に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 4-2 Dimension 10 FM User Manual SME300000119
ページ12に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 4-3 Battery Assembly 將多餘的電線塞入電池孔中 Stuff the surplus wires into the battery case. 11 FM User Manual SME300000119
ページ13に含まれる内容の要旨
EXCELL PRECISION CO., LTD. Internal Calibration Adjust calibration switch to “ON”, and the screen displays: After 2 seconds ENTER TARE Press ZERO Press ENTER TARE Press ZERO Press ENTER Adjust cal
ページ14に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 5-1 Specification Setting *Parameter Code ENTER Press ⇒ Decimal Point ⇒ Capacity ⇒ Division 1 Input the *Parameter Code intended ⇒ Division 2 ⇒ Zero Tracking Setting ENTER Press ⇒ Unstable Detecting Setting The screen displays the parameters set pre
ページ15に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 2 Specification Parameter Description Setting Default Parameter Function Setting Code Description Parameter Decimal CSP-00 Refer to the description on next page. Point 999999 CSP-01 Capacity ↓ Max. value for weight display 999999 000000 1 2 5 CSP-02 Division 1 Min. value for weight display 1 10 20 50 1 2 5 CSP-03 Division 2 Min. value for Weight display 1 10 20 50 Zero CSP-04 Tracking Refer to the description on next page. Settin
ページ16に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 2 Parameter Display Description CSP-00 Decimal Point Display Decimal Point Digit None 1 Digit . 2 Digits . 3 Digits . 4 Digits . CSP-04 Zero Tracking Setting Display Division/Period 0.25 D/1 sec . 0.5 D/1 sec . 0.75 D/1 sec . 1D/1 sec 1.25 D/2 sec . 1.5 D/2 sec . 1.75 D/2 sec . 2 D/2 sec No Zero Tracking CSP-05 Unstable Detecting Setting Display
ページ17に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 5-2 Internal Weight Calibration Turn on and warm up the machine for 15 to 30 minutes before calibration. Adjust calibration switch to “ON”, and the screen will display . TARE ZERO Press or to select . Procedure ENTER ENTER Zero Zero calibration complete Calibration ESC ENTER ENTER Place the Weight weight mass Calibration Confirmed and set the weight
ページ18に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 2 Password Setting Adjust calibration switch to “ON” After 2 seconds ZERO F1 Input new password 4 “0000” means no password. ENTER Confirm new password (re-input again) ENTER 4 After complete password setting, when entering calibration mode or function setting mode, the screen displays
ページ19に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 5-3 Internal Function Setting ENTER Press *Parameter Code ⇒ Tare or Zero Function under Unstable Status ⇒ Turning on Re-zero Input the *Parameter code intended ⇒ Re-zero Range ⇒ Filter Strength ENTER Press ⇒ AD Sampling Rate ⇒ Animal Scale Mode The screen displays
ページ20に含まれる内容の要旨
EXCELL PRECISION CO., LTD. 2 Internal Function Parameter Description Setting Default Parameter Function Setting Code Parameter Description Tare or Zero 0 ON CFN-00 0 Function under 1 OFF Unstable Status 0 OFF Re-zeroing after CFN-01 0 Turning on 1 ON 0%: Full range re-zero CFN-02 Re-zero Range 0% ~ 30% 1% ~ 30%: 0 Capacity × ± setting value% CFN-03 Filter Strength 0 ~ 5 Strength increases by number 2 0 No limit 1 20 times/sec. AD Sampling CFN-04 2 Rate 2 10 time
