ページ1に含まれる内容の要旨
ATA User Manual
Please insert your installation CD now and
then follow the on screen instructions
iiNet ATA Telephone Adapter
Setting up for ADSL and VoIP.
For model F1PG200ENau
F1PG200ENau
ページ2に含まれる内容の要旨
Table of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . . . Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . . . . . . . . 3 Knowing your Phone Adapter . . . . . . . . . . . . . . . . . . .4 . . . . . . . Package Contents . . . . . . . . . . . . . . . . . . . . . . .4 . . . . . . . . . System Requirements . . . . . . . . . . . .
ページ3に含まれる内容の要旨
section Introduction Thank you for purchasing the Phone Adapter . This User Manual provides 1 instructions for installing and configuring the Phone Adapter . In minutes, you will be able to place phone calls to any location in the world using your standard phone equipment and your broadband Internet 2 connection . 3 4 5 6
ページ4に含まれる内容の要旨
Product Overview Key Features Voice over Internet Phone Dialing This exciting, new technology allows you to place calls over your existing broadband Internet connection with the same quality and functionality as your standard telephone service . ® Compatible with both PCs and Mac Computers The Phone Adapter supports a variety of networking environments ® ® ® including Mac OS 8 .x, 9 .x, X v 0 .x, Linux , Windows 95, 98, Me, ® NT , 2000, XP, and others . It requires an Internet browser and a
ページ5に含まれる内容の要旨
section Product Overview 1 Built-In Dynamic Host Configuration Protocol (DHCP) Client Built-In Dynamic Host Configuration Protocol (DHCP) client 2 on-board makes for the easiest possible connection to your router . The DHCP server in your router will assign IP addresses to your Phone Adapter automatically so there is no need for a complicated 3 networking setup . 4 5 6 2 3 3
ページ6に含まれる内容の要旨
Knowing your Phone Adapter Package Contents • Phone Adapter • RJ45 Ethernet Networking Cable • RJ Phone Cord • Power Supply • User Manual • Quick Installation Guide • Features Overview System Requirements • Broadband Internet service, such as cable or DSL • Unused LAN port on a router Router requirements: • Connection to a broadband Internet service • DHCP server support service • One standard telephone 4 5 5
ページ7に含まれる内容の要旨
section Knowing your Phone Adapter 1 Product Specifications 2 Standards IEEE 802 .3u 0/ 00Base-Tx Fast Ethernet (WAN) 3 Protocols Supported 4 SIP, CSMA/CD, TCP/IP, UDP, DHCP (client) 5 Voice Compression G .7 , G .729 6 Management Browser-Based User Interface Ports 0/ 00Base-Tx auto-sensing RJ45 port, WAN 2 FXS voice ports (Line and 2) LEDs Network: Connection to router Voice: Line , Line 2 Dimensions and Weight 27mm x 9 .5mm x 39mm 65g (5 .82oz .) Power 5VDC, 2 .4A The Phon
ページ8に含まれる内容の要旨
Knowing your Phone Adapter [a] Line 2 [b] Line 1 Connection to Router DC Power Line 2 Line 1 5V/2.4A [c] Connection to Router Reset [d] Reset [e] Power [a] [b] [c] [d] [e] (a/b) Phone Ports These ports are for connection to your telephone handset . Use the RJ cable that was provided with the Phone Adapter to connect the telephone to these ports . (c) Connection to Router This port is for connection to your router . Use the cable that was provided with the Phone Adapter to connect the rou
ページ9に含まれる内容の要旨
section Knowing your Phone Adapter Knowing your Phone Adapter 1 (e) Power Jack Connect the included 5VDC, 2 .4A power supply to this jack . 2 3 LEDs 4 5 A B 6 When you apply power to the Phone Adapter or restart it, a short period of time elapses while the Phone Adapter starts up (about 30 seconds) . During this time, you will see all the LEDs flash on, and then off . When the Phone Adapter has completely started up, the power LED will light, indicating the Phone Adapter is ready for use . A
ページ10に含まれる内容の要旨
Connecting and Configuring your Phone Adapter Router Requirements Your cable or DSL router must be equipped with an RJ45 Ethernet port . Many routers have both an RJ45 Ethernet port and a USB connection . If you have a router with both Ethernet and USB, and you are using the USB connection at this time, you will be instructed to use the RJ45 Ethernet port during the installation procedure . If your router has only a USB port, you can request a different type of router from your ISP, or
ページ11に含まれる内容の要旨
section Connecting and Configuring your Connecting and Configuring your Phone Adapter Phone Adapter 1 Connecting your Phone Adapter to a Gateway/Router 2 Installing the Phone Adapter as a client to a router that already exists. 3 1. Identify an available LAN port on your existing router or home gateway . 4 2. Using the Ethernet cable that is included with your Phone Adapter, take one end of the cable and connect it to the available 5 LAN port on your Router . Connect the opposite end
ページ12に含まれる内容の要旨
Troubleshooting Problem: • Phone Adapter is not working . • LEDs do not come on . Solution: If the LED indicators are not ON, the problem may be that the Phone Adapter is not connected properly . Verify that the Phone Adapter is plugged into a power source . Check to see that the cables are connected to the correct ports and that they are secure . Problem: There is no dial tone and the “Line ” (or “Line 2”) LED is not lit . Solution: 1 . Power off your cable or DSL modem by unplugging its
ページ13に含まれる内容の要旨
section Troubleshooting Troubleshooting 1 Problem: • The Phone Adapter cannot connect to the router . 2 • The “connected” light does not come on . 3 Solution: If your Phone Adapter appears to be powered but the “connected” 4 light is not green, the problem may be that your router and Phone Adapter are not connected properly . 5 Make sure the network cable between the router and the Phone Adapter is connected to the Phone Adapter’s “Connection to 6 Router” port and that the cable is firmly
ページ14に含まれる内容の要旨
Troubleshooting Technical Support You can find technical support information at http://www .iinet .net .au or contact iiNet customer support on 3 22 58 . 2 3 3
ページ15に含まれる内容の要旨
section Troubleshooting Information 1 FCC Statement 2 DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY 3 We, Belkin Corporation, of 50 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, 4 F PG200ENau to which this declaration relates, complies with Part 5 of the FCC Rules . Operation is subject to the following two conditions: 5 ( ) this device may not cause harmful interference, and (2) this device must accept an
ページ16に含まれる内容の要旨
Information Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment . Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 39 & RSS 2 0 Industry Canada . This Class B digital apparatus complies with Canadian ICES-003 . Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada . Europe-Euro
ページ17に含まれる内容の要旨
section Information Information 1 Belkin Corporation Limited 2-Year Product Warranty Belkin Corporation warrants this product against defects in materials 2 and workmanship for 2 years . If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges 3 prepaid, to the authorized Belkin dealer from whom you purchased the product . Proof of purchase may be required . 4 This warran
ページ18に含まれる内容の要旨
ATA Hardware Setup For Advanced trouble shooting, technical support and VoIP setup please call our dedicated Belkin ATA support hotline on: 1300 552 002 Open Monday - Friday 8am - 8pm EST VoIP Account Support/Settings If you have any questions that relate to your account details and VoIP account settings with iiNet please call: 13 22 58 Press 1 for Support and then 1 for Broadband. Open 24 hours, 7 days a week. Belkin, Inc . Belkin International, Inc . 4 Pioneer Avenue, Tuggerah Business P
