ページ1に含まれる内容の要旨
Washing machine
ZWF 1850 W
User information
g
ページ2に含まれる内容の要旨
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your per- sonal safety. Important! Information that prevents damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description
ページ4に含まれる内容の要旨
Installation and connection instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Operating Instructions 1 Safety Prior to using the appliance for the General safety first time Repairs to the washing machine may only be car- ried out by qualified/authorised service engineers. • Follow the “Installation and connection instruc- Never use the appliance when the electrical cable tions”. is damaged or the control panel, worktop or plinth If the appliance is delivered in the winter months area are damaged to such an extent that the inside when there are minus temperatures: s
ページ6に含まれる内容の要旨
Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic com- ponents are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. 2 Old appliance The symbol W on the product or on its pack- aging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the r
ページ7に含まれる内容の要旨
Description of the appliance Control panel Detergent drawer Door indicator Rating plate (behind door) Plinth flap/ Screw feet Drain pump (height adjustable) Control panel Programme knob and On/Off switch Display Function keys START/PAUSE key What is shown in the display Information field, shows the current settings Current time 12.45 COTTONS End of cycle 15.05 Cycle end at Temperature 95C1000nLaXZUvblaEa Spin speed/ Options Rinse hold/Night cycle 7
ページ8に含まれる内容の要旨
Programme overview Options Spin speed Programme COTTONS 5kg • 95°, 60°, 50°, 40°, 30°, Cold COTTONS ECONOMY 5kg 2) 60° , 50°, 40° SYNTHETICS 2,5kg 60°, 50°, 40°, 30°, Cold DELICATES 2,5kg 40°, 30°, Cold HANDWASH 2kg 40°, 30°, Kalt WOOL 40°, 30°, Cold 2kg SILK 1kg MINI 30° 2,5kg RINSE 5kg DRAIN - SPIN 5kg DELICATE SPIN 2,5kg
ページ9に含まれる内容の要旨
1) Application/features: Care symbols J M O Programme for normally to heavily soiled whites and coloureds made of cotton/linen. M O Energy-saving programme for lightly to normally soiled whites/coloureds made of cotton/linen. I K N Programme for easy-care mixed fibres and synthetics. I K Gentle programme for delicate fabrics such as bonded fabrics, microfibres, synthetics, net cur- 2 tains. (max. load for net curtains 15 to 20 m ). With RINSE HOLD also suitable for fabrics with cli- mate memb
ページ10に含まれる内容の要旨
Prior to using for the first time Switching on the appliance for the first time - setting the language The display is set to English as standard in the facto- ry. 3 Important! If the display does not show the menu for setting the language when the appli- ance is switched on, the appliance has been switched on before. If this happens, please see the section “Settings/Language”. To switch on the appliance, turn the programme knob to any programme, e. g. COTTONS. The display lights up and shoul
ページ11に含まれる内容の要旨
Cleaning the machine prior to first use In order to remove any residues from the drum and water container which may have been left during manufacturing, perform the first wash cycle without any washing in the machine. Programme: COTTONS 60 °C, option VERY SHORT, add approx. 1/4 meas- uring cup of detergent. Preparing and sorting washing Preparing washing Empty the pockets. Remove foreign bodies (e.g. coins, paper clips, nails, etc.). Do up zips, button up covers to prevent damage to washing.
ページ12に含まれる内容の要旨
Adding detergent / conditioner Important: Only use detergents/conditioners that are suitable for use in household washing machines. Add detergent/conditioner in accordance with the detergent/conditioner manufacturer’s instructions. Observe instructions on the packaging. The amount of detergent used depends on: – the degree of soiling, – the load size – the hardness of the tap water. If the manufacturer does not make any recommen- dations with regard to small volumes of washing: For a half-loa
ページ13に含まれる内容の要旨
Switching on the appli- ance/selecting a pro- gramme Select the programme using the programme knob. 3 When you select a programme, you switch the appliance on at the same time. – The display lights up and shows the programme set, the current time and the estimated end of the cycle. – Depending on the programme, the washing ma- chine suggests a temperature and a spin speed. You can change these suggestions. Changing the temperature Press theTEMP. key repeatedly until the desired 12.45 COTTON
ページ14に含まれる内容の要旨
Setting options Options can be added to a wash cycle that has al- ready been selected. Press the OPTIONS key. The display shows the sym- bols for the options. . EXTRA RINSE Depending on the cycle, the appliance carries out one or more additional rinses. EXTRA RIN- SE can also be permanently set (see section “Settings”). SHORT/VERY SHORT Shortened wash cycle for lightly soiled wash- ing. – SHORT: for COTTONS and SYNTHETICS – VERY SHORT: for COTTONS, SYNTHETICS and DELICATES. DELAY START To delay
ページ15に含まれる内容の要旨
Extra Rinse, Prewash, Intensive, Quick Iron 1.Press the OPTIONS key repeatedly until the de- Extra Rinse sired symbol flashes, e. g., EXTRA RINSE. (With 14.45 NO each press of the key, the next symbol flashes – aaýýýýýXZUvblaEa moving from left to right.) Temp. Spin Options Change Exit 2.Press the CHANGE key. A black bar appears under Extra Rinse the symbol. The display changes from NO to YES. 14.55 YES The option is set. To switch the option off, press aaýýýýýX_ZUvblaEa the CHANGE key aga
ページ16に含まれる内容の要旨
Delay Start 1.Press the OPTIONS key repeatedly, until the DE- LAY START symbol flashes. 2.Press the CHANGE key. A black bar appears under Delay Start the DELAY START symbol , “Start in 30 min” is 18.45 Start in 4h shown in the display. Press the CHANGE key re- peatedly, until the display shows the desired period aaýýýýýXZU_vblaEa by which you want to delay the start, e. g. “Start in Temp. Spin Options Change Exit 4 h” (=4 hours). 3 If 20 h is displayed and you press the key again, the delayed
ページ17に含まれる内容の要旨
Interrupting a programme/ Adding washing Interrupting a programme The programme can be interrupted at any time by pressing the START/PAUSE key. It is then re-start- ed by pressing the key again. To stop the washing machine before the pro- gramme has ended, turn the programme knob to OFF. Important! Be careful if there is water in the appli- ance! Adding washing 1.Press the START/PAUSE key. If “Door locked” and “Pause” are alternately shown in the display, it is no longer possible to add
ページ18に含まれる内容の要旨
Settings Settings are special functions that remain perma- nently stored independent of each washing cycle – even after the appliance has been switched off. Memory 1, 2, 3 Programme combinations can be stored at pro- gramme knob positions MEMORY 1, 2, 3 and can then be selected using the programme knob. To do this the desired programme combination is first put together and then stored. Setting the Memory Example: Programme position MEMORY 1 is to be given the following programme combination: SYN
ページ19に含まれる内容の要旨
Sound The volume of the acoustic signal can be selected. 1.Turn the programme knob to any programme and press the OPTIONS key repeatedly until the SE- TUP symbol flashes. 2.Press the CHANGE key. 3.Press the OPTIONS key repeatedly, until SOUND is shown in the display. 4.Press the CHANGE key repeatedly until the desired Sound volume (NORMAL, LOW, NO SOUND) is shown in LOW the display. aaýýýýýaaaaaaaEa 5.Press the EXIT key twice. Temp. Spin Options Change Exit Extra Rinse 1.Turn the programme k
ページ20に含まれる内容の要旨
Clock 1.Turn the programme knob to any programme and press the OPTIONS key repeatedly until the SE- TUP symbol flashes. 2.Presss the CHANGE key. 3.Press the OPTIONS key repeatedly, until CLOCK is shown in the display. 4.Using the CHANGE key set the desired time. With 11.17 Clock: each press of the key, the display moves on by one Set time minute. If the key is kept pressed, the display changes in 10 minute steps. aaýýýýýaaaaaaaEa 5.Press the EXIT key twice. Temp. Spin Options Change Exit Cont
