ページ1に含まれる内容の要旨
English Español
For Your Records and
Warranty Assistance
T T Type ype ype T T T,G,B Models ,G,B Models ,G,B Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 41847-01
20100528
©2010 Hunter Fan C
ページ2に含まれる内容の要旨
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years . This installation and operation manual gives you complete instructions for installing and operating your fan . We are proud of our work . We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world . Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter na
ページ3に含まれる内容の要旨
Preparing the Fan Site Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and energy savings . 30” From 8’ Minimum Choose a fan site where: Wall or Ceiling Nearest • No object can come in contact with the rotating fan blades during Obstruction 7’ Minimum Height Blades to normal operation . Floor • The fan blades are at least 7 feet above the floor and the ceiling is at least
ページ4に含まれる内容の要旨
Preparing the Fan Site (continued) Step 2 - Cut the Ceiling Hole 2-1 . Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan . 2-2 . Cut a 4” diameter hole through the drywall or plaster of the ceiling . You will use the hole to install the support brace and outlet box . Step 3 - Install a Support Brace, If Necessary Determine if there is a ceiling joist directly above the ceiling hole . If the joist is there, determine if it is p
ページ5に含まれる内容の要旨
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease . You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting . The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods . Outlet Box Mounting Style
ページ6に含まれる内容の要旨
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling . • Drill holes for and install wood screws . • Identify and connect electrical wires . • Lift 40 pounds . If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician . Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (
ページ7に含まれる内容の要旨
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Isolator disconnect the power by turning off the circuit breakers to the outlet box Ceiling and associated wall switch location . If you cannot lock the circuit breakers Plate in the off position, securely fasten a prominent warning device, such as a tag, to the service panel . 2-1 . Drill two pilot holes into the wood support structure through the Step 2-2 outermost holes in the out
ページ8に含まれる内容の要旨
3 • Assembling and Hanging the Fan Steps 3-2 – 3-3 WARNING: Fan may fall if not assembled as directed in these installation instructions . Downrod 3-1 . Unbundle the wires from the fan . For Standard or Angled mounting: 3-2 . To assemble fan to hang down from a flat or angled ceiling, insert Canopy the downrod through the canopy and canopy trim ring . Feed the wires from the fan through the downrod . Canopy 3-3 . Loosen the square head setscrew on the adapter to install the pipe Tri
ページ9に含まれる内容の要旨
4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a Wire qualified electrician. Connector Wall switches are not included . Select an acceptable general-use switch in accordance with national and local electrical codes . 4-1 . Before attempting installation, make sure the power is still off . Dual Switch Wiring 4-2 . To connect the wires, hold the bare metal leads together and place a wire co
ページ10に含まれる内容の要旨
5 • Installing the Canopy and Canopy Trim Ring Step 5-2 5-1 . Holding the canopy, raise the fan off the hook . Ceiling Plate 5-2 . Align the slots in the canopy with the tabs on the ceiling plate . 5-3 . Raise the canopy over the ceiling plate . Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy . 5-4 . Partially install the three canopy screws into the canopy one at a Canopy Trim Canopy Ring time . Once all three screws are in, ti
ページ11に含まれる内容の要旨
6 • Assembling the Blades Step 6-1 (Detail) Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan) . 6-1 . Your fan may include blade grommets . If your fan has grommets, insert them by hand into the holes on the blades . 6-2 . Attach each blade to a blade iron using three blade assembly screws . If you used grommets, the blades may appear slightly loose after screws are tightened . This is normal . 6-3 . Remove the blade mounting screws and rubber shipp
ページ12に含まれる内容の要旨
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button . This feature gives you the option of installing the fan with OR without the included light fixture . The steps below direct you whether or not you are installing a light fixture . WARNING: Use only the light fixture supplied with this fan model . 7-1 . To attach the upper switch housing, partially install
ページ13に含まれる内容の要旨
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) 7-6 . To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly . Note: Both plug connectors are polarized and will only fit together Plug one way . Make sure the connectors are properly aligned before Connector connecting them . Incorrect connection could cause improper operation and damage to the product . 7-7 . Pl
ページ14に含まれる内容の要旨
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Light Fixture 7-9 . Remove the switch housing cap and plug button from the lower switch housing . 7-10 . Push the wires from the light kit through the hole in the center of the lower switch housing . 7-11 . Screw the threaded rod of the light fixture into the lower Lower Switch switch housing . Housing 7-12 . Install the nut and washer from the end of the light fixture inside the lower switch ho
ページ15に含まれる内容の要旨
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-16 . First install B10 candelabra bulbs (60 Watt Maximum) into the sockets . 7-17 . Attach the extra pull chain (included) to the fan pull chain using the breakaway connector . (You may find the breakaway connector on the end of the extra chain .) 7-18 . Thread the fan pull chain through the hole in the metal disk . Then, thread the fan pull chain through the hole in the center of
ページ16に含まれる内容の要旨
8 • Operating and Cleaning Your Ceiling Fan 8-1 . Turn on electrical power to the fan . 8-2 . The fan pull chain controls power to the fan . The pull chain has four settings in sequence: High, Medium, Low, and Off . • Pull the chain slowly to change settings . • Release slowly to prevent the chain from recoiling into the blades . • The chain uses a breakaway connector that separates if the chain is jerked . If this happens, simply reinsert the chain into the connector . 8-3 . The light pull
ページ17に含まれる内容の要旨
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1 . Turn power on, replace fuse, or reset breaker . 2 . Loosen canopy, check all connections according to the wiring the fan section . 3 . Check the plug connection in the switch housing . 4 . Push motor reversing switch firmly left or right to ensure that the switch is engaged . 5 . Pull the pull chain to ensure it is on . 6 . Remove the shipping bumpers . Problem: Noisy operation. 1 . Tighten the blade assembly screws and blade
