ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ITALIANO Questo prodotto è coperto da garanzia Atlantis Land della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 2 years warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual. FRA
ページ3に含まれる内容の要旨
INDEX 1. Product Overview ............................................................................................... 7 1.1 Key Features .............................................................................................. 7 1.2 Network Scheme......................................................................................... 7 2. Cabling and Setup .............................................................................................. 8 2.1 Package Contents ...
ページ4に含まれる内容の要旨
Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VIsta are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land. All other names mentioned mat be trademarks or r
ページ5に含まれる内容の要旨
Limited Warranty Our warranties (for hardware and software) do not cover data loss – back up the contents of your drive to a separate storage medium on a regular basis. Also, consequential damages; incidental damages; and costs related to data recovery, removal and installation are not recoverable under our warranties. Safety Information • Only qualified personnel should carry out technical work on the device. • When cleaning, avoid using cleaning sprays and any kinf of solution co
ページ6に含まれる内容の要旨
Important information for the correct recycle/treatment procedures of this equipment The crossed-out wheeled bin symbol printed on the unit label or unit packaging indicates that this equipment must not be disposed of as unsorted municipal waste but it should be collected separately. The waste of electric and electronic equipment must be treated separately, in order to ensure that hazardous materials contained inside the equipment are not buried thereby providing potential future pr
ページ7に含まれる内容の要旨
1. Product Overview Thank you for purchasing USB2.0 NAS Dongle storage device. 1.1 Key Features • Support USB mass storage device • Support Auto IP (DHCP server or DHCP Client)/ Fixed IP • Under network environment, it supports one 10/100Mbps Ethernet port • Password management provides secure access to HDD and web management • Support Samba/FTP server • Support Bit Torrent download server • Support UPnP AV media Server & Apple i-Tunes® music server • Support USB Printer server
ページ8に含まれる内容の要旨
2. Cabling and Setup 2.1 Package Contents The package should contain the following items: • Disk Master USB NAS Dongle • RJ45 CAT 5 cable • One Quick Start Guide (English, Italian) • One CD with driver, software, utility and manuals • Power Adapter AC-DC (5VDC, 1.2A) If any item contained is damaged or missing, please contact your local dealer as soon as possible. 2.2 Choosing a place for your Disk Master When selecting a place to set up your Disk Array, be sure to follow thes
ページ9に含まれる内容の要旨
• Place the Disk Master close enough to a network jack for the Ethernet cable to reach it. • Leave at least 10cm of space at the rear of the device for ventilation. • Use a grounded wall outlet (uninterruptible online power supply with AVR is recommended.) • Avoid an electrical outlet controlled by wall switches or automatic timers. Accidental disruption of the power source may wipe out data in the memory of your computer or Disk Array. • Keep the entire system away from potential so
ページ10に含まれる内容の要旨
2.4 Front Panel and LEDs LED MEANING Power Lit blue if powered on. Link Flashes yellow when sending/receiving data. TASTO MEANING Reset Push RESET button for 30s to recovery default values on NAS Dongle. PORT MEANING Power Jack Connect the supplied power adapter to this jack. LAN Please use the Ethernet cable to connect the Disk Master to network. USB Please use the USB cable provided to connect an HDD enclosure or the printer cable to connect the device’s USB port (for p
ページ11に含まれる内容の要旨
2.5 Factory Default Settings The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals. Before you configure this device you need to know the following default settings: • Username: admin • Password: atlantis • IP Address: Obtained by DHCP Server (if a DHCP isn’t available, the device will be reacheable with the following IP address: 192.168.1.1). • Server name: DISKMASTER 2.6 Searching Disk Master NASF101 To run Se
ページ12に含まれる内容の要旨
3. Quick Configuration 3.1 Set a fixed IP address In order to map network drive permanently on any PCs that require them, we suggest to fix an IP Address to the LAN interface of NAS Dongle. To set a fixed IP address on the NAS dongle, click on IP Config menu’ and set this function on Static IP as below; after, insert the IP Address, Subnet Mask and Gateway to the NAS dongle. If you would like to use the BT client/server, you must set also the primary and secondary DNS Server and pr
ページ13に含まれる内容の要旨
Secondary DNS Insert the secondary DNS address. 3.2 Disk Format During the first installation, it is necessary to format the disk contained into HDD enclosure in order to create some default folder and save configuration (for BT client). Please select Disk Utility and press Format to start the formatting procedure. FIELD MEANING Disk ID Show disk type ID and some disk information. Format Disk Press this button to format disk. 13
ページ14に含まれる内容の要旨
Scan Disk Press this button to start a diagnosys procedure of the disk connected to the NAS dongle. 3.2 Map a network drive To create a new network drive, please see following procedure: • Click Start->Computer (for Windows VISTA) or My Computer->Tools (for Windows 2000/XP) • Click on Map Network Drive • Fullfill the field Folder with the path “//x.y.z.k/PUBLIC” (where x.y.k.z means the IP Address assigned to the NAS Adapter). • Click on Different user name ad insert Guest as usernam
ページ15に含まれる内容の要旨
4. Advanced Configuration 4.1 Status Provide the basic information for NAS Dongle. 4.2 Identification You can change and modify your host & group name, and password from this page. Click “Apply” to save the setting. In Window O/S, right click on “My computer”, choose “Properties”, and go to the computer name tab to see your current workgroup. For Mac O/S to join windows workgroup, open the directory access utility (under Applications-> utilities), select SMB and click confi
ページ16に含まれる内容の要旨
FIELD MEANING Host Name This is used to identify your device on the network. If you prefer a different name, type in the new name and click “Apply” to save setting. Group Name This should be same as your workgroup. In general, the default “WORKGROUP” will be OK. But if your workstation belongs to different workgroup, type in the correct group name to modify. Press Apply to save configuration. We strongly suggest you to change the password as soon as you logged in, to prevent u
ページ17に含まれる内容の要旨
4.3 Data/Time Setting You can change time setting form this page. Clicks “Apply” to save the setting. By default SNTP is in network time service, your can also select “Synchronize to PC”. If internet access is available we recommended setting SNTP to Network time service instead. 4.4 IP Config By default, the “IP config” is set to “Automatic IP”. This is the recommended setting and will allow NAS Dongle to obtain its IP address automatically. If you prefer setting it manually,
ページ18に含まれる内容の要旨
18
ページ19に含まれる内容の要旨
4.5 Disk Utility In this page, you can manage the hard disk setting. FIELD MEANING Format Disk For the first time installation, you need to format hard disk into FAT32 system file, this procedure applies to either new or used hard disk. Scan Disk After the scan, it will show the number of file content and health status for the hard disk. 19
ページ20に含まれる内容の要旨
4.6 Maintenance This page allows you to update NAS dongle firmware, to go back to default setting or to reboot NAS system. Follow the steps below to update the loader and firmware for NAS Dongle: 1. Obtain the latest firmware from your vendor. 2. Store the firmware file in your computer and decompress them if necessary. 3. Browse your system and locate the firmware (BIN file). 4. Click on “Upload”. 5. Confirm the pop-up massage to start the update. 6. Wait and DO NOT click an
