ページ1に含まれる内容の要旨
SY-6BE+
Motherboard
Quick Start Guide
The SOYO CD Quick BIOS Hardware Introduction
Setup Installation
ページ2に含まれる内容の要旨
SOYO ™ SY-6BE+ Motherboard ® ® m m * These specifications are subject to change without notice 2 6BE+ Serial - Version 2.4 - Edition: December 1999 "http://www.soyo.com.tw". on the Internet. The address is Web Site If you need any further information, please visit our document is subject to change without notice. however, no guarantee is given as to the correctness of the contents. The information in this installing the Motherboard. Information in this guide has been carefully checked for reli
ページ3に含まれる内容の要旨
1 Introduction 1 Congratulations on your purchase of the SY-6BE+ Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-6BE+ Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard. Unpacking When unpacking the Motherboard, check for the fo
ページ4に含まれる内容の要旨
SY-6BE+ Motherboard Layout PS/2 KB PS/2 Mouse Connector Connector 0 1 13 2 3 1 1 2 r N m IIr FDC PRT 1 1 2 Intel ATX 82443 BX Power 1 1 AGP Slot IDE 2 IDE 1 Ultra t 1 K 1 5 1IR (PC-PCI) 2 5 4 3 1 Wake on 3 LAN 3 l 1 4 82371 EB hBIOS Flas __ HDD LED + Speaker _ 1 Turbo + LED + Keylock PWRBT 2 _ Power Reset LED+ 3 1 N Key Features ® Ø Supports Intel Pentium III processor (450- Ø Supports Creative SB-LINK ™ (PC-PCI) for PCI ® 600MHz), Pentium II processor (233-450MHz) audio card TM & Celeron proc
ページ5に含まれる内容の要旨
2 Installation 2 To avoid damage to your Motherboard, follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket. Follow the directions in this section designed
ページ6に含まれる内容の要旨
Install the Motherboard Follow the steps below in order to perform the installation of your new SY-6BE+ Motherboard. Install the CPU Record the working frequency of your CPU that should be clearly marked on the CPU cover. FSB 66MHz FSB 100MHz To mount the processor that you have purchased separately, follow these instructions. Note: Installing a heat sink and cooling fan on top of your CPU is necessary for proper heat dissipation. Failing to install these items may result in overheating an
ページ7に含まれる内容の要旨
Make Connections to the Motherboard This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on how to connect internal and external peripherals to your new SY-6BE+ Motherboard, please refer to SY-6BE+
ページ8に含まれる内容の要旨
Configure Memory Your board comes with three DIMM sockets, providing support for up to 768MB of main memory using DIMM modules from 8MB to 256MB. For 66MHz front side bus CPUs use 12ns or faster memory; for 100MHz front side bus CPUs use 8ns (100MHz, PC100 compliant) memory. 1 1 2 1 2 3 1 2 3 Important: It is of prime importance that you install DIMM modules as outlined in the table above in order to preserve signal integrity on 100MHz front side bus systems. Set the CPU Frequency This Motherb
ページ9に含まれる内容の要旨
Clear CMOS Data (JP5) Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5 for at least 5 seconds, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap. 1 2 3 1 2 3 The SY-6BE+ provides over-clocking capability. Due to the over-clocking setting your system may fail to boot up or hang during run time. Please perform the following steps to recover your system from the abnormal situation : 1.Turn off system power. (If y
ページ10に含まれる内容の要旨
3 Quick BIOS Setup 3 This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILI
ページ11に含まれる内容の要旨
4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-6BE+ Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Insert the SOYO CD into the CD-ROM drive The SOYO CD will auto-run, and the SOYO CD Start Up Menu will
ページ12に含まれる内容の要旨
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Follow the instructions on your screen
ページ13に含まれる内容の要旨
drive driverr revision: revision: Intel inf utility for Win 9 Intel inf utility for Win 955 Intel BusMaster Drivers for Win 95 Intel BusMaster Drivers for Win 95 Intel BusMaster Drivers for Win NT Intel BusMaster Drivers for Win NT Intel BusMaster Drivers for OS/ Intel BusMaster Drivers for OS/22 ) Winbond hardware doctor (ver 1.4) for win 95/9 Winbond hardware doctor (ver 1.4) for win 95/988 Winbond hardware doctor for win N Winbond hardware doctor for win NTT Cance Cancell OOKK (Driver Inst
ページ14に含まれる内容の要旨
Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program. When the installation is complete, most drivers require to restart your system before they can become active. Check the Latest Releases Click the 'Check the latest Releases' button to go the SOYO Website to automatically find the latest BIOS, manual and driver releases for your motherboard. This button will only work if your computer is connected to the internet throug
ページ15に含まれる内容の要旨
n n . , : : : 15 : support@soyo.nl ail Em )181 569 4134 Fax: +44 (0 Fax: +31-79-3637575 Tel : +44 (0)181 569 4111 Tel : +31-79-3637500 Technical Support: Technical Support: sales@soyo.co.uk E-mail: : sales@soyo.nl ail Em )181 569 4134 Fax: +44 (0 Fax: +31-79-3637575 Tel : +44 (0)181 569 4111 Tel: +31-69-3637500 Sales Sales www.soyo.co.uk Web Site: europe.com Republic of Ireland www.soyo- , www.soyo.nl Web Site: Covered: United Kingdom and Region Germany Hounslow, TW3 3UD Hanworth Road,
ページ16に含まれる内容の要旨
u ) S : T F E - 16 www.soyo.com.hk Web Site: E-mail: support@soyo.co.jp Covered: Hong Kong Region Fax: 81-3-33682199 SOYO Hong Kong 81-3-33682188 : Tel Technical Support: soyok@chollian.net e-mail : fax : 82-2-712-5853 E-mail: soyo-jpn@soyo.co.jp tel : 82-2-717-4392 Fax: 81-3-33682199 Technical Support: 81-3-33682188 : Tel Sales: mail : soyo@soyo.co.kr www.soyo.co.jp Web site: ax : 82-2-704-2619 Japan Covered: Region el : 82-2-716-2850 SOYO Japan ales Region Covered: Korea soyo@public.bta.
ページ17に含まれる内容の要旨
ページ18に含まれる内容の要旨
SERIAL SY-6BE+ Version 2.4 Edition: December 1999
