AMX MVP-7500の取扱説明書

ページ1に含まれる内容の要旨

Quick Start Guide
MVP-7500 Modero Wireless Touch Panel (Firmware version G4)
For more detailed installation, configuration, programming, file transfer, and
MVP-7500 Panels Specifications (Cont.)
operating instructions refer to the MVP-7500 and MVP-8400 Modero
Panel LCD  Panel type: TFT Color Passive-Matrix
ViewPoint Touch Panels Instruction Manual, available on-line at
Parameters:  Aspect ratio: 4 x 3
2
 Brightness: 120 cd/m
www.amx.com.
 Channel transparency: 8-bit Alpha blending
 Co

ページ2に含まれる内容の要旨

4. From the Service Set Identifier keyboard, enter the SSID name used on Panel Calibration, Setup, and System Connection your Wireless Access Point. 1. Press down and hold both the bottom-left and the bottom-right 5. Press the Encryption field until it reads WEP64 or WEP128. The pushbuttons simultaneously for10 seconds to open the Calibration page. 64/128 selection reflects the bit-level of encryption security previously 2. Calibrate the panel by pressing over the two cross-hairs. When done