ページ1に含まれる内容の要旨
MOTORIZED 7” WIDE TFT LCD MONITOR
WITH COLOR TV
MODEL NO. : PLTV7.5DIN
1
ページ2に含まれる内容の要旨
ANY CHANGES OR MODIFICATIONS IN CONSTRUCTION OF THIS UNIT DEVICE WHICH IS NOT APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. WARNING DO NOT WATCH MONITOR WHILE DRIVING 2
ページ3に含まれる内容の要旨
CONTENTS WARNING CAUTION UNIT 1. MONITOR 2. REMOTE CONTROL 3. REMOTE CONTROL BATTERY BASIC OPERATION 1. POWER ON/OFF 2. OPENING THE MONITOR 3. CLOSING THE MONITOR 4. ADJUSTING TILT POSITION 5. ADJUSTING MOVE POSITION 6. ADJUSTING LEFT/RIGHT VIEWING POSITION 7. SELECTING MODE 8. AUDIO MUTE 9. ADJUSTING VIDEO PICTURE MODE (ASPECT) 10. SELECTING THE MENU FUNCTION 1. FM TRANSMITTER CONTROL 2. TILT POSITION CONTROL 3. MOVE POSITION CONTROL CONTROL 1. NAVIGATION AUDIO 2.
ページ4に含まれる内容の要旨
WATCHING TV 1. MENU CONTROL 2. CHANNEL CONTROL 3. FINE TUNING CONTROL 4. AUTO MEMORY 5. CHANNEL SEARCH WARNING SCREEN INSTALLATION BASIC CONNECTION CONNECTING TO AV SOURCES SPECIFICATIONS TROUBLE SHOOTING 4
ページ5に含まれる内容の要旨
WARNING The exclamation mark in triangle and WARNING mark are intended to alert the user to the important operating instructions. Wrong operations will result in severe injury to the unit. DO NOT WATCH MONITOR WHILE DRIVING Watching the video while driving may interrupt driving and may cause an accident. DO NOT OPERATE ANY FUNCTION THAT TAKE YOUR ATTENTION AWAY FROM DRIVING YOUR VEHICLE Operation of some functions for this unit is very complicated. Because of this, it is necessar
ページ6に含まれる内容の要旨
CAUTION DO NOT RAISE THE VOLUME EXCESSIVELY Keep the volume at a specific level which you can still hear outside noise while driving . Keeping the volume loud may cause an accident. DO NOT USE THIS EQUIPMENT OUTSIDE THE VEHICLE Do not use this equipment for purpose other than those listed for a vehicle. Failure to do so may result in an electric shock or an injury. HOW TO USE THE BATTERIES Do not mix new batteries with old batteries and do not replace with other than specified
ページ7に含まれる内容の要旨
UNIT 1. MONITOR 4 5 5 4 4 1 2 3 1. POWER ON/OFF / MODE BUTTON 2. OPEN/CLOSE BUTTON 3. TILT UP/DOWN BUTTON 4. MENU BUTTON 5. SEARCH UP/DOWN BUTTON 7
ページ8に含まれる内容の要旨
2. REMOTE CONTROL 1. POWER ON/OFF BUTTON 2. TILT UP/DOWN BUTTON 3. OPEN/CLOSE BUTTON 4. MODE SELECTION BUTTON 5. SOUND MUTE BUTTON 6. NAVIGATION BUTTON 7. ASPECT SELECTION BUTTON 8. SEARCH UP/DOWN BUTTON 9. VOL ◀ / ▶: TILT UP/DOWN BUTTON 10. MENU BUTTON 11. MANUAL SEARCH BUTTON 12. AUTO SEARCH/ AUTO MEMORY BUTTON 13. BAND SELECTION BUTTON 14. NUMERIC BUTTONS 3. REMOTE CONTROL BATTERY - Do not insert battery in the wrong direction. - Be sure to observe the correct polarity (
ページ9に含まれる内容の要旨
BASIC OPERATION 1. POWER ON/OFF 1) POWER ON (1) Press the POWER button on the unit or on the remote control to turn the power on. But the monitor will not be opened and you can listen to the sound of this unit. (2) You can also turn the power on by pressing the OPEN/CLOSE button. The power will be on and the monitor will be opened. 2) POWER OFF (1) Press the POWER button on the unit or on the remote control again to turn the power off. (2)If you turn the p
ページ10に含まれる内容の要旨
3. CLOSING THE MONITOR 1) Press OPEN/CLOSE button on the unit or on the remote control. The monitor will be closed. 2) If it is not closed, hold left and right upper side of the monitor and make the monitor parallel with the unit as the picture. And press OPEN/CLOSE button to close the monitor. NOTE 1) If the monitor is not parallel to the front of the unit, the monitor will not be closed. 2) If OPEN/CLOSE button is pressed while the unit is powered on, the monitor
ページ11に含まれる内容の要旨
5. ADJUSTING MOVE POSITION 1) Press MENU button to show FUNCTION on the screen. 2) Press SEARCH ▲/ ▼ button to select MOVE. 3) Press VOLUME ▶button to move the unit one step forward(50mm). The menu will show the position at 1, 2, 3. Press VOLUME ◀button to move the unit one step backward(50mm). The menu will show the position at 2, 1, 0. 6. ADJUSTING LEFT/RIGHT VIEWING POSITION The monitor’s left/right position can be adjusted for easier viewing by hand
ページ12に含まれる内容の要旨
7. SELECTING MODE Press MODE button to select the desired mode. Each time you press this button, the mode changes as follows. AV1 -> AV2 ->AV3 ->TV NOTE AV3 has only video input. 8. AUDIO MUTE Press MUTE button to make the sound mute. Press MUTE button again to return to the previous audio level, or if you press VOLUME ◀ or ▶ button, the volume will be adjusted and the sound will be on. 9. ADJUSTING VIDEO PICTURE MODE (ASPECT) Each time you press ASPECT button, the picture
ページ13に含まれる内容の要旨
follows. 1) Press MENU button repeatedly until CONTROL MENU is selected. 2) Press SEARCH ▲/ ▼ button to select SCREEN. 3) Press VOLUME ▶ or ◀ button to select the desired picture mode. 10. SELECTING THE MENU You can select the menu to make this unit or AV sources connected to this unit operate in the best conditions. 1) Press MENU button to select the desired menu. Each time you press MENU button, the menu changes as follows. AV1, AV2, AV3 Mode : CONTROL->FUNCTION-> PICTURE->ME
ページ14に含まれる内容の要旨
FUNCTION 1. FM TRANSMITTER CONTROL This is to listen to the sound of AV sources connected to this unit with the car speakers. If you set the FM frequency of the FM transmitter in the following way and you have the FM Radio unit in your car, you can listen to the sound of AV sources of this unit. 1) Press MENU button to show FUNCTION menu on the screen. It will show the following menu. 2) Press SEARCH ▲/▼ button to select FM TRANS. 3) Press VOLUME ▶ or ◀ bu
ページ15に含まれる内容の要旨
2. TILT POSITION CONTROL 1) Press MENU button to show FUNCTION on the screen. 2) Press SEARCH ▲/▼ button to select TILT POSITION. 3) Press VOLUME ▶button to swing the LCD panel one step backward. Press VOLUME ◀button to swing the LCD panel one step forward. The TILT position is +2, +1, 0, -1, -2. 3. MOVE POSITION CONTROL 1) Press MENU button to show FUNCTION on the screen. 2) Press SEARCH ▲/ ▼ buttons to select MOVE POSITION. 3) Press VOLUME ▶button to mov
ページ16に含まれる内容の要旨
CONTROL 1. NAVIGATION AUDIO (※ In case, you use an optional compatible Navigation System) When a navigation system is connected to this unit, you can use the navigation system properly after you adjust the navigation audio control. If you press NAVI button on the remote control, the navigation mode will be displayed on the screen on any mode, when you connect the navigation system to this unit, you should connect it through RGB connector at the backside of this unit NOTE This is li
ページ17に含まれる内容の要旨
2. WATCHING NAVIGATION Press NAVI button on the remote control in order to watch the navigation. NOTE When the rear view camera is connected to this unit and you put the gear lever to R(Reverse Gear), the rear view will be displayed on the screen even if the monitor is on Navigation mode. 3. SETTING THE CAMERA IN When a rear view camera is connected to this unit, you can adjust CAMERA IN CONTROL. If you put the gear lever to R(Reverse) to move your car bac
ページ18に含まれる内容の要旨
4. WATCHING THE REAR VIEW Put the gear lever to R(Reverse) on any mode. The monitor will show the rear view camera picture. 5. WIRING CONNECTION Connect orange color connection wire with a “REVERSE GEAR” sticker to a switched power output terminal of the R (Reverse) gear. See BASIC CONNECTION Part. NOTE If you select AV mode connected to the rear view Camera with MODE button, the monitor does not show the rear view camera picture. The monitor will show only the WARNING picture.
ページ19に含まれる内容の要旨
PICTURE 1. CONTRAST CONTROL 1) Press MENU button to show PICTURE on the screen. 2) Press SEARCH ▲/▼ button to select CONTRAST. 3) Press VOLUME ▶ or ◀ button to change the CONTRAST. VOLUME ▶ : CONTRAST level will be increased. VOLUME ◀ : CONTRAST level will be decreased. CONTRAST level is from 0 to 30. 2. BRIGHT CONTROL 1) Press MENU button to show PICTURE on the screen. 2) Press SEARCH ▲/▼ button to select BRIGHT. 3) Press VOLUME ▶ or ◀ button to change th
ページ20に含まれる内容の要旨
3. COLOR CONTROL 1) Press MENU button to show PICTURE on the screen. 2) Press SEARCH ▲/▼ button to select COLOR. 3) Press VOLUME ▶ or ◀ button to change the COLOR. VOLUME ▶ : COLOR level will be increased and the COLOR will be richer. VOLUME ◀ : COLOR level will be decreased and the COLOR will be lighter. COLOR level is from 0 to 30. 4. TINT CONTROL 1) Press MENU button to show PICTURE on the screen. 2) Press SEARCH ▲/▼ button to select TINT. 3) Press VOL
