ページ1に含まれる内容の要旨
User’s Guide
ページ2に含まれる内容の要旨
This equipment is in conformity with essential requirements of EC Directive 1999/5/EC. We declare the product is in conformity with the EMC requirements of EC Directive1999/5/EC at nominal mains input 230 V, 50 Hz although the rated input of the product is 200–240 V, 50–60 Hz. (For Europe Only) Copyright Copyright © 2000 by Canon, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or c
ページ3に含まれる内容の要旨
For Your Safety (Australia Only) To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. Wrongly wired extension cords are a major cause of fatalities. The power point shall be located near the equipment and shall be easily accessible. The fact that the equipment
ページ4に含まれる内容の要旨
Contents Chapter 1: Introduction Using Your Documentation ....................................................................................1-2 Type Conventions Used in This Guide..............................................................1-2 Customer Support..................................................................................................1-3 Important Safety Instructions.................................................................................1-4 Chapter 2: Setting Up
ページ5に含まれる内容の要旨
Chapter 4: Document Handling Document Requirements.......................................................................................4-2 Scanned Area of a Document ...........................................................................4-3 Loading Documents...............................................................................................4-4 Problems With Multipage Documents ...............................................................4-6 Adding Pages to the Document........
ページ6に含まれる内容の要旨
Sending Methods...................................................................................................7-6 Memory Sending................................................................................................7-6 Manual Sending Via the Handset......................................................................7-7 Cancelling Sending................................................................................................7-9 Redialling When the Line is Busy..............
ページ7に含まれる内容の要旨
™ Telstra FaxStream Duet (Australia Only) ...........................................................8-14 Setting the MultiPASS for Network Switch ......................................................8-14 Network Switch System Operation..................................................................8-15 Telecom FaxAbility (New Zealand Only)..............................................................8-16 Setting the MultiPASS for Network Switch ...............................................
ページ8に含まれる内容の要旨
Chapter 13: Troubleshooting If You Cannot Solve the Problem ........................................................................13-2 Clearing Jams......................................................................................................13-3 Jams in the ADF ..............................................................................................13-3 Jams in the Multi-Purpose Tray.......................................................................13-4 LCD Messages .........
ページ9に含まれる内容の要旨
Chapter 1 Introduction Using Your Documentation......................................................................1-2 Type Conventions Used in This Guide...................................................1-2 Customer Support....................................................................................1-3 Important Safety Instructions .................................................................1-4 Chapter 1 Introduction 1-1 Introduction
ページ10に含まれる内容の要旨
Using Your Documentation Your MultiPASS includes the following documentation: • MultiPASS C100 User’s Guide (this guide): Provides detailed information on how to set up, operate, maintain, and troubleshoot your MultiPASS. ® • MultiPASS Suite for Windows Software User’s Guide: This guide, included in the CD-ROM, describes how to use your MultiPASS to fax, print, and scan from within ® your PC’s Windows environment. Type Conventions Used in This Guide Please read the list below of symbols, terms,
ページ11に含まれる内容の要旨
TX/RX NO. TX/RX NO. is the abbreviation used for Transaction number. TX Denotes Sending. RX Denotes Receiving. In addition, this guide uses distinctive typefaces to identify buttons and information in the LCD: • The buttons you press appear in this typeface: Stop. • Information in the LCD appears in this typeface: USER SETTINGS. Customer Support Your MultiPASS is designed with the latest technology to provide trouble-free operation. If you encounter a problem with the unit’s operation, try to so
ページ12に含まれる内容の要旨
Important Safety Instructions Read these safety instructions thoroughly before using your MultiPASS. Except as specifically described in this guide, do not attempt to service the c MultiPASS yourself. Never attempt to disassemble the unit: opening and removing its interior covers will expose you to dangerous voltages and other risks. For all service, contact your local authorised Canon dealer or the Canon help line. Handling and Maintenance • Follow all warnings and instructions marked on the
ページ13に含まれる内容の要旨
• Unplug the MultiPASS from the wall outlet and refer service to qualified personnel under the following conditions: – When the power cord or plug is damaged or frayed. – If liquid has spilled into the unit. – If the unit has been exposed to rain or water. – If the unit does not operate normally when you have followed the instructions in this guide. Adjust only those controls that are covered by the instructions in this guide. Improper adjustment of other controls may result in damage and may re
ページ14に含まれる内容の要旨
• To ensure reliable operation of the MultiPASS and to protect it from overheating (which can cause it to operate abnormally and create a fire risk), do not block the exhaust vent and never block or cover any openings on the unit by placing it on a bed, sofa, rug, or other similar surface. Do not place the unit in a cupboard or built-in installation, or near a radiator or other heat source unless proper ventilation is provided. Install the unit approximately 10 cm away from walls and other equip
ページ15に含まれる内容の要旨
Chapter 2 Setting Up Unpacking the MultiPASS........................................................................2-2 Removing Shipping Materials.................................................................2-4 Assembling the MultiPASS......................................................................2-5 Making Connections ................................................................................2-6 Connecting the Telephone Line and an External Device .......................2-6 Con
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
You should also have the following: • B.T. adaptor* • Limited warranty card** • If any items are damaged or missing, notify your local authorised Canon dealer or the Canon help line immediately. • In addition to the items shipped with your MultiPASS, you will need to purchase a printer cable to connect your MultiPASS to a PC. (1 p. 2-8) • Important! Save your sales receipt for proof of purchase in case your unit requires warranty service. *This item is only available for the UK. **This item is o
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
Assembling the MultiPASS Follow this procedure to assemble your MultiPASS: Hold the document Hook the tab on the 1 2 support so that it output tray to the curves towards the opening on the back of the unit and MultiPASS. fit the tabs of the support into the slots above the ADF. The MultiPASS comes 3 with the document tray already attached. However, if you accidentally remove the tray, attach it by fitting the slots on the tray into the tabs on the unit. • To see how the MultiPASS loo
ページ20に含まれる内容の要旨
Making Connections Connecting the Telephone Line and an External Device The MultiPASS has two jacks on the back for connection of the following: • Telephone line • Optional handset, telephone, answering machine, or data modem If you only have one telephone line and plan to use the MultiPASS for receiving both faxes and voice calls, you will need to connect the optional handset, a telephone, or an answering machine to the unit. Be sure to connect any external device before using your MultiPASS. F
