Summary of the content on the page No. 1
Summary of the content on the page No. 2
For a large-print version of this guide, or for product-related questions, visit us online at: www.motorola.com/cordless Or phone us at: •1-800-353-2729 U.S.A. •1-800-461-4575 Canada •1-888-390-6456 TTY (Text Telephone) Copyright © 2005 Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reser
Summary of the content on the page No. 3
Welcome Welcome Congratulations on your purchase of a Motorola SD4504 series accessory. Take a moment to ensure that your purchase includes each of the items pictured. Product registration (US only) is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your Motorola product require an update or other service. Registration is not required for warranty coverage. To register your product onlin
Summary of the content on the page No. 4
Wireless Camera Overview 1 Lens 2 Speaker 3 Microphone 1 4 Optical light sensor 5 Registration/Page Button 6 Registration/Status LED 2 3 4 6 5 ii
Summary of the content on the page No. 5
Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Wireless Camera Overview . . . . . . . . . . . . . . . . . .ii Important Safety Instructions . . . . . . . . . . . . . . . . v Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Battery Safety Instructions . . . . . . . . . . . . . . . . . . 1 Charging the Camera Battery . . . . . . . . . . . . . . . . 3 Setting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
Industry Canada (IC) Information . . . . . . . . . . . . .15 Motorola Limited Warranty . . . . . . . . . . . . . . . . . .20 iv
Summary of the content on the page No. 7
Important Safety Instructions Important Safety Instructions Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property: To reduce the risk of fire and shock: 1. Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site. 2. Do not use while wet or while standing in water. 3. Do not use
Summary of the content on the page No. 8
7. Do not disassemble this product. If service or repair work is required, contact the Motorola address found in the back of this user guide. 8. Do not overload wall outlets and extension cords. 9. Avoid using during an electrical storm. Use a surge protector to protect the equipment. 10. Do not use this cordless phone to report a gas leak, especially if you are in the vicinity of the gas line. Unplug this cordless phone immediately from an outlet if: • The power cord or plug is damaged
Summary of the content on the page No. 9
Important Safety Instructions Installation Guidelines 1. Read and understand all instructions and save them for future reference. 2. Follow all warnings and instructions marked on the product. 3. Do not install this product near a bath tub, sink, or shower. 4. Operate this phone using only the power source that is indicated on the marking label. If you are unsure of the power supply to your home, consult your dealer or local power company. 5. Do not place this product on an unstable ca
Summary of the content on the page No. 10
8. Use only the power supply that came with this unit. Using other power supplies may damage the unit. 9. Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. 10.To avoid interference to nearby appliances, do not place the base of the cordless phone on or near a TV, microwave oven, refrigerator, or VCR. viii
Summary of the content on the page No. 11
Getting Started Getting Started Battery Safety Instructions • Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury. • Caution: There is a risk of explosion if you replace the battery with an incorrect battery type. Use only the battery that came with your phone or an authorized replacement recommended by the manufacturer. • Keep batteries out of the reach of children. • Remove batteries if storing ove
Summary of the content on the page No. 12
Installing the Batteries 1 Remove any stickers if present. 2 Press on the indentation on the battery door, and slide upwards to remove. 3 Plug connector into the receptacle, and insert the battery into the compartment. (Make sure that the black wire is on the right hand side to ensure proper connection.) 4 Replace the battery door. Red Black 2
Summary of the content on the page No. 13
Getting Started Charging the Camera Battery 1 Plug the power cord into the back of the swivel base. 2 Plug the power cord into an electric outlet. Note: The initial battery charging time for your new camera is at least 12 hours. The camera operates using a charged battery or while plug into an outlet. In stand by mode, a fully charged battery will operate your camera for a few days, or for a few hours in viewing mode. 3
Summary of the content on the page No. 14
Setting Up Registering Your Camera You can register up to 8 devices (handsets, cameras, or Cell Dock) to a base unit. To Check Registration: To register your new camera: • Press the CONNECT TO button 1 Press and hold the Registration button located • Scroll through the items listed beneath the speaker on the camera. to confirm that the device you 2 Press and hold the PAGE button on base unit. The in registered is available. use/voice mail light on the base unit flashes. The camera gi
Summary of the content on the page No. 15
Setting Up Deregistering a Device 1 Listen to messages to clear the message waiting LED. 2 Press B on the base unit. 3 Press and hold down PAGE on the base unit until the IN USE indicator begins to flash slowly, and then release. 4 Press and hold down PAGE again until the IN USE indicator begins to flash quickly, and then release PAGE. 5 Quickly and fully press and release PAGE again. 5
Summary of the content on the page No. 16
Placing Your Camera You can place your camera on a flat surface, like a desk or you can use the mounting kit (included) to place your camera on a wall. 1 Cut out the template on the following page and place it against the wall where you wish to mount the camera. 2 Use a pencil to indicate where to place the screws. 3 Place the anchors and screws in the wall using a screw driver. The base of the camera slides and locks onto the screws. Your camera can rotate left, right, and swivel to the
Summary of the content on the page No. 17
Setting Up 7
Summary of the content on the page No. 18
Using Your Camera Monitoring a Room with Your Camera Place your camera in a room that you wish to monitor. If you are using the SD4501 handset, you can hear any activity in the room. The SD4502 handset with color display lets you see and hear activity in the room. 1 Place the camera in the room to be monitored. 2 Press the CONNECT TO button on your handset. The display lists the devices registered to the base unit. 3 Scroll to and select your Camera. 4 Press the VIEW softkey if you are usi
Summary of the content on the page No. 19
Using Your Camera Lighting Tips for Your Camera Your camera has night vision capability. The camera senses light levels and adjusts accordingly. The night vision works only when your camera is plugged into a wall outlet. Night vision images have less and less color as the lighting level is reduced becoming black and white once night vision mode is fully engaged. You can achieve better color saturation by increasing the lighting level in the room being viewed. Consider where your camera i
Summary of the content on the page No. 20
Setting Contrast for SD4502 Handset 1 Press Menu. 2 Scroll to and select Display Set Up. 3 Scroll to and select Set Contrast. 4 Adjust the contrast setting by using the scroll keys. 5 Press OK to save changes. Note: The camera should never be pointed directly at the sun or damage may occur. 10
