Summary of the content on the page No. 1
01094A-R135-XSS-ENG_Cover 3/28/06 4:07 PM Page 1
Instruction Manual
DVD-R135
www.samsung.com
English
AK68-01094A-00
Summary of the content on the page No. 2
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 2 IMPORTANT NOTE The mains lead on this equipment is supplied with a Warning moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT is detachable. If a replacement fuse cover is REMOVE THE COVER(OR BACK). required,
Summary of the content on the page No. 3
Getting Started 01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 3 ● Exterior interference such as lightning and static electricity can affect normal operation of this DVD Precaution Recorder. If this occurs, turn the DVD Recorder off and on again with the STANDBY/ON button, or disconnect and then reconnect the AC power cord to the AC power outlet. The DVD Recorder will operate normally. ● Be sure to remove the disc and turn off the DVD Important Safety Instructions Recorder after use. ● Disc
Summary of the content on the page No. 4
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 4 Disc Storage Using CD-R/-RW Be careful not to harm the disc because the data on ● Use a 700MB(80 minutes) CD-R/-RW disc. these discs is highly vulnerable to the environment. If possible, do not use a 800MB(90 minutes) or above ● Do not keep under direct sunlight. disc, as the disc may not play back. ● Keep in a cool ventilated area. ● If the CD-R/-RW disc was not recorded as a closed ● Store vertically. session, you may experience a delay in
Summary of the content on the page No. 5
Getting Started 01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 5 ● If you want to record the disc in VR Mode and then Do not use the following discs! record in V Mode, be sure to execute Format. Be careful when executing Format because all the ● LD, CD-G, CD-I, Video-CD, CD-ROM and DVD-ROM recorded data may be lost. discs should not be used in this DVD Recorder. ● A DVD-RW blank disc is initialized to VR Mode when [Note] first initialized. Disc types that can be played : CD/CD-R/CD-RW/ ● DV
Summary of the content on the page No. 6
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 6 Other type of connecting the Audio output cable ..19 Contents Case 1 : Connecting to your TV......................................19 Case 2 : Connecting to a stereo amplifier with AV output jacks..........................................20 Case 3: Connecting to an AV amplifier with a digital output jack ..........................................................20 Getting Started Getting Started Connecting HDMI/DVI to a TV ....................
Summary of the content on the page No. 7
Getting Started 01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 7 Using Bookmarks.............................................................55 Recording Recording Using Markers ..................................................................56 Before Recording.....................................................36 Playing an Audio CD/MP3 .....................................57 Recordable discs..............................................................36 Playing an Audio CD (CD-DA)/MP3 .
Summary of the content on the page No. 8
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 8 High quality progressive scan General Features Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry provides the highest image playback and recording quality. (See pages 19, 31~32) The DVD Recorder allows you to record and play high quality digital video on DVD-RW/DVD-R discs. You can record and edit digital images on DVD-RW/DVD-R A variety of functions with an easy-to-use u
Summary of the content on the page No. 9
Getting Started 01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 9 Before reading the user’s How to use the DVD manual Recorder Make sure to check the following terms before reading the user’s manual. Step 1 Select the disc type Icons that will be used in manual This DVD Recorder can record on the following types Icon Term Definition of discs. If you want to repeatedly record on the same disc or This involves a function available you want to edit the disc after recording, select a in DVD or DV
Summary of the content on the page No. 10
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 10 Recording Finalising & Playing on other DVD components Step 3 Step 6 There are two different recording methods, Direct To play your DVD on other DVD components, Recording and Timer Recording. Timer recording is finalising may be necessary. First, finish all editing and classified as a Date : Once, Daily, MO-SA, MO-FR, recording operations, then finalise the disc. W-SA, etc. Recording mode : XP (high quality mode), SP (standard When using a
Summary of the content on the page No. 11
Getting Started 01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 11 Unpacking Accessories Setting the Remote Control Check for the supplied accessories below. You can control certain functions of another manufacturer’s TV with this remote control. Control function buttons involve: STANDBY/ON, PROG , VOL +/-, Direct Number buttons, / TV MUTE, INPUT SEL. button. Video/Audio Cable RF Cable for TV HDMI Cable DVI Adapter Cable Batteries for Remote Control (AAA Size) Remote Control Instruction Ma
Summary of the content on the page No. 12
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 12 To determine whether your television is BRAND BUTTON compatible, follow the instructions below. SELECO 74 1. Switch your television on. SHARP 36, 37, 38, 39, 48 2. Point the remote control towards the television. SIEMENS 71 3. Press and hold the STANDBY/ON button and enter SINGER 57 the two-figure code corresponding to the brand of your television, by pressing the appropriate number SINUDYNE 57 buttons. SONY 35, 48 TELEAVA 73 Controllable TV
Summary of the content on the page No. 13
Getting Started 01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 13 Description Front Panel 1. STANDBY/ON 7. DISPLAY Turns the DVD Recorder on and off. Displays the playing status, title/chapter/time, etc. 2. AV 2 IN 8. PROG ( ) Connect external equipment. Select TV preset Channels. Same as PROG button on the remote control. 3. DV IN Connects external digital equipment with a DV 9. REC jack. (such as a camcorder) Starts recording. 4. DISC TRAY 10. STOP Opens to accept a disc. Stops disc play
Summary of the content on the page No. 14
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 14 Rear Panel 1. RF IN / RF OUT 7. S-VIDEO OUT(better video quality) Connects antenna cables. Connects the input of external equipment using an S-Video cable. 2. HDMI OUT Connects the input of external equipment using a 8. COMPONENT VIDEO OUT(best video quality) HDMI-HDMI cable or HDMI-DVI cable. Connects to equipment having Component video input jacks. 3. DIGITAL AUDIO OUT(OPTICAL) Connects to an amplifier having a digital optical 9. AV 1 AUDI
Summary of the content on the page No. 15
Getting Started 01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 15 13. ANYKEY Button Tour of the Remote Control Use this to view the status of the disc that is being played. 14. REC Button Use to make a recording on DVD-RW/-R discs. 15. REC MODE Button 26 28 This will display the recording status.(XP/SP/LP/EP) 29 27 16. REPEAT Button Allows you to repeat a title, chapter, track or disc. 1 16 17. OPEN/CLOSE Button 17 To open and close the disc tray. 18. SUBTITLE Button 2 Press this to switch th
Summary of the content on the page No. 16
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 16 Quick Overview Connecting A Quick Overview presented in this guide will give you enough information to start using the DVD Recorder. & Setting Up This section involves various methods of Connecting the DVD Recorder connecting the DVD Recorder to other external † components and required initial setting modes. Other type of connecting the Video output cable † Other type of connecting the Audio output cable † Connecting HDMI/DVI to a TV † Conn
Summary of the content on the page No. 17
Connecting & Setting Up 01094A-R135-XSS-ENG_17~37 3/28/06 4:19 PM Page 17 Connecting the DVD Other type of connecting Recorder the Video output cable There are several ways to output video signal. 1. Disconnect the aerial cable from your TV and Select one of the following video connecting that best connect it to on the rear panel of the DVD suits you below. Recorder. 2. Connect of the DVD Recorder and the aerial ● Case 1 : Connecting to a Video (Composite) output input of your TV using the
Summary of the content on the page No. 18
Video/Audio Cable 01094A-R135-XSS-ENG_17~37 3/28/06 4:19 PM Page 18 Case 1 : Connecting to a Video Case 2 : Connecting to an (Composite) output jack S-Video output jack 1. Connect a video(yellow) cable between the VIDEO 1. Connect an S-Video cable (not included) between the (yellow) OUT jack on DVD Recorder and VIDEO S-VIDEO OUT jack on DVD Recorder and S-VIDEO (yellow) INPUT jack on your TV (or AV amplifier). INPUT jack on your TV (or AV amplifier). ● You will enjoy regular quality images.
Summary of the content on the page No. 19
Connecting & Setting Up yellow white red green blue red 01094A-R135-XSS-ENG_17~37 3/28/06 4:19 PM Page 19 Case 3 : Component Video Other type of connecting output jacks the Audio output cable 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on your TV. 2. Connect audio cables (white and red) between the There are several ways to output audio signal. AUDIO OUT jacks on the DVD Recorder and AUDIO Select th
Summary of the content on the page No. 20
01094A-R135-XSS-ENG_17~37 3/28/06 4:19 PM Page 20 Case 2 : Connecting to a stereo Case 3: Connecting to an AV amplifier with AV output jacks amplifier with a digital output jack If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks. If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings. (See pages 30~31) red white red
