Summary of the content on the page No. 1
6900 Hotel
6000 Hotel
LED TV
installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________Serial No. _____________
UC6900 호주_중아, UC6000 구주 호텔.indd 1 2010-04-27 오후 2:24:27
Summary of the content on the page No. 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB;
Summary of the content on the page No. 3
ENGLISH Contents y Accessories .............................................................................................................................................................. 4 y Install the Stand (6900 Hotel) .................................................................................................................................... 5 y Install the Stand (6000 Hotel) ...........................................................................................................
Summary of the content on the page No. 4
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ colour and shapes may vary depending on the models. y Remote Control & Batteries (AAA x 2) y Cleaning Cloth y Owner’s Instructions y Power Cord y Warranty Card / Safety Guide (Not available in some locations) y Data Cable y Blanking Bracket & Screw (1EA) y Holder-Ring (4EA) y Holder-Wire stand y Holder-Wire (3EA) y Power Code Clamp y Cable Tie y Component
Summary of the content on the page No. 5
s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s Install the Stand (6900 Hotel) Components When installing the stand, use the provided components and parts. A B C 9EA (M4 X L8) 1 EA 1 EA y Stand y Guide Stand y Screws 1 3 B A Front Rear Top View 2 4EA C 4 ✎ NOTE Make sure to distinguish between the front and back of each component when assembling them. x x Make sure that at least two persons lift and move the LED T
Summary of the content on the page No. 6
s s s s s s s s s s s s s s s s s s s s s Install the Stand (6000 Hotel) Component When installing the stand, use the provided components and parts. (A) 5EA (M4 X L12) (B) 5EA (M4 X L8) Stand (1EA) Guide Stand (1EA) Screws (10EA) Follow the steps below to connect the TV to the stand. Top view Screws (M4 X L12) Guide Stand Front Stand Rear Rear 1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown. 2 Screws (M4 X L8) 1 2. With your TV upright, connect the TV to the Stand a
Summary of the content on the page No. 7
1 1 2 2 3 4 3 5 4 5 6 6 7 8 7 9 8 0 9 0 ! ! * & ^ % $ # @ Viewing the Connection Panel * & ^ % $ # @ UA40C6900VHXZN 1 UA46C6900VHXZN 1 UA55C6900VHXZN 3 4 3 5 4 5 6 6 7 8 7 9 8 0 9 Power Input 0 ! ! & ^ % $ # @ * * & ^ % $ # @ 1 UA40C6900VHXXY 1 UA46C6900VHXXY UA55C6900VHXXY 3 4 UA40C6900VHXRD 3 UA46C6900VHXRD 5 4 UA55C6900VHXRD 5 6 7 6 7 8 9 8 0 9 0 Power Input ! ! * & ^ $ # @ * & ^ $ # @ English 7 UC6900 호주_중아, UC6000 구주 호텔.indd 7 2010-04-27 오후 2:24:38
Summary of the content on the page No. 8
1 UE40C6000RHXXC UE46C6000RHXXC 2 3 4 5 6 7 8 9 0 Power Input ! * & ^ % $ # @ ✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. 1 ✎ When connecting an external device, match the color of the connection terminal to the cable. 1 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional module so as to improve device use convenience. 3 2 COMMON INTERFACE 4 3 Headphones jack H: Headpho
Summary of the content on the page No. 9
8 AV OUT (Aus, NZ, Singapore) / AUDIO OUT (EU, Central Africa) – AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater. – VIDEO OUT: Connect to Video input on an appropriate external display device. (DTV signal is unsupportable. This output is only for Analogue video signal.) 9 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port. 0 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the B
Summary of the content on the page No. 10
$ COMPONENT IN – Connects Component video / audio. – Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the other ends to corresponding component video out jacks on the DVD. – If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to the component jacks ("PR", "PB", "Y") on your TV. – The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R
Summary of the content on the page No. 11
Viewing the Remote Control ✎ This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons. POWER SOURCE Display and select the available video Turns the TV on and off. sources. Selects the HDMI mode directly. HDMI Have direct access to channels. Alternately selects Teletext, Double or Mix. TTX/MIX PRE-CH Return to the previous channel. MUTE Cut off the sound temporarily. Adjust the volume. Change channels. CH LIST Display
Summary of the content on the page No. 12
ETH MODEM ETH MODEM ETH MODEM Connecting the TV with SBB TV Rear Panel Hotel Server STB(Set Top Box) UA40C6900VHXZN or SBB(Set Back Box) UA46C6900VHXZN ETH MODEM UA55C6900VHXZN Data Cable TV Rear Panel Hotel Server STB(Set Top Box) UA40C6900VHXXY or SBB(Set Back Box) UA46C6900VHXXY ETH MODEM UA55C6900VHXXY UA40C6900VHXRD Data Cable UA46C6900VHXRD UA55C6900VHXRD TV Rear Panel Hotel Server STB(Set Top Box) UE40C6000RHXXC or SBB(Set Back Box) UE46C6000RHXXC ETH MODEM ETH MODEM Data Cable 1. C
Summary of the content on the page No. 13
Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following method. ¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel Volume Control Box VOL+ VOL- 2 1 Speaker 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Signal wire : Speaker + Shield wire : Speaker - 2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port of the Bathroom Wall of the hotel. y Installing
Summary of the content on the page No. 14
y Variable Output Port Specifications – Speaker Wire: Use speaker cable no more than 82 feet (25m) in length. Volume Control Box VOL + 1 3 2 VOL - VOL - UP GND VOL - DOWN ( White 1 ) ( Black /Red 2 ) ( Shield Wire 3 ) ¦ Connect through the Fixed Output (available without an external amplifier) Audio Amplifier TV Rear Panel AUDIO IN 1 Ster eo cable 1. Connect the AUDIO OUT port of the TV and the Audio In port of the audio amplifier with a stereo cable. English 14 UC6900 호주_중아, UC6000 구주 호텔.indd
Summary of the content on the page No. 15
Connecting the MediaHub HD Output of any external source connected to MediaHub HD on hotel desk. MediaHub HD Rear HDMI USB RS/232 TV Rear Panel 1 RS-232 Data Cable 2 HDMI cable 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI port of the TV and the HDMI port of the MediaHub HD. y MediaHub HD – The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB) and corresponding outputs. The corresponding output
Summary of the content on the page No. 16
RS/232 Connecting the RJP (Remote Jack Pack) Output of any external source connected to RJP on hotel desk. RJP Rear RCA AUDIO/PC USB HDMI S-VIDEO TV Rear Panel 1 2 Video / Audio Cable 3 HDMI cable 4 D-sub / PC Audio cable 1. Connect the RJP port of the TV and the RS/232 port of the RJP. 2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the RCA port of the RJP. 3. Connect the [HDMI] port of the TV and the HDMI port of the RJP. 4. Connect the PC IN / PC/DVI AUDIO IN port of the TV to t
Summary of the content on the page No. 17
y The following table shows the approximate time in seconds to switch from the TV to the input source, based on the priority. ✎ Scenario 1: When no inputs are connected. Source To Connect AV 2 Sec PC 0.7 Sec HDMI 3.9 Sec ✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected. Source Disconnect To Connect Total AV 4.5 Sec 2 Sec 6.5 Sec PC 0.7 Sec 0.7 Sec 1.4 Sec HDMI 3.9 Sec 3.9 Sec 7.8 Sec ✎ E.g. If the RJP has all its live sources AV, PC a
Summary of the content on the page No. 18
Setting the Hotel Option Data ¦ Stand-alone Mode To Enter: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order. To Exit from this menu : power off and turn on again. No Item initial Value Description 1 Hotel Mode On Hotel mode(Stand alone) on/off 2 SI Vendor Off Select the SI Vendor 3 Power On Channel 1 TV will switch on to this particular Channel Provides channel Type description for Power On channel selected. i.e. 4 Channel Type ATV Selected channel analog or Digital & antannae selection (Ai
Summary of the content on the page No. 19
No Item initial Value Description Selection of the way to update clock data • Auto: Use clock data fr om server when the TV is in the interactive mode. 23 Local time Manual • Manual: Use clock data from DVB channel or manual clock setting when the TV is in the stand-alone mode. • TTX: manual clock setting (with updating from TTX data) 24 Audio Loop In OFF Audio loop identification or H.P identification selection • On: Main menu display 25 Menu Display ON • Off: Main menu No display Select Cu
Summary of the content on the page No. 20
¦ Interactive Mode To Enter: Press the INFO → MENU → 0 → 1 → EXIT buttons in order, in normal operation state. To Exit from this menu : Power Off and Turn On again. (Press POWER button with general SAMSUNG remocon) No Item initial Value Description 1 Hotel Mode On Hotel mode(Stand alone) on/off 2 SI Vendor Samsung Select the SI Vendor 3 Power On Channel 1 TV will switch on to this particular Channel 4 Channel Type ATV Provides channel Type description for Power On channel selected. i.e. Selecte
