Summary of the content on the page No. 1
LTC 8569, LTC 8570 Series,
LTC 8571, LTC 8572 Series
Instruction Manual
EN Code Merger Units
Summary of the content on the page No. 2
| LTC 8569 Series | Instruction Manual | Important Safeguards EN 2 Important Safeguards 1. Read, Follow, and Retain Instructions - All safety 10. Power Sources - Operate the unit only from the type and operating instructions should be read and of power source indicated on the label. If unsure of followed before operating the unit. Retain instructions the type of power supply to use, contact your dealer for future reference. or local power company. 2. Heed Warnings - Adhere to all warnings on th
Summary of the content on the page No. 3
| LTC 8569 Series | Instruction Manual | Important Safeguards EN 3 Safety Precautions For Indoor Product 1. Water and Moisture - Do not use this unit near water - for example, in a wet basement, in an unprotected outdoor installation or in any area classified as a wet location. CAUTION: TO REDUCE THE RISK OF 2. Object and Liquid Entry - Never push objects of ELECTRIC SHOCK, DO NOT REMOVE COVER any kind into this unit through openings, as they (OR BACK). NO USER SERVICEABLE PARTS may touch danger
Summary of the content on the page No. 4
| LTC 8569 Series | Instruction Manual | Safety Precautions EN 4 FCC & ICES INFORMATION Sicherheitshinweise (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU operation. VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKS
Summary of the content on the page No. 5
| LTC 8569 Series | Instruction Manual | Safety Precautions EN 5 Veiligheidsmaatregelen Medidas de Segurança VOORZICHTIG: OPEN DE BEHUIZING OF DE ACHTERKANT CUIDADO: PARA REDUZIR O RISCO DE CHOQUE VAN HET APPARAAT NIET. ZO VERMINDERT U HET RISICO ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE OP ELEKTRISCHE SCHOKKEN. IN HET APPARAAT POSTERIOR). NO INTERIOR, NÃO EXISTEM PEÇAS QUE BEVINDEN ZICH GEEN ONDERDELEN DIE U ZELF KUNT POSSAM SER REPARADAS PELO UTILIZADOR. REMETA A REPAREREN. LAAT SERVICE EN OND
Summary of the content on the page No. 6
| LTC 8569 Series | Instruction Manual | Table of Contents EN 6 Table of Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 7
| LTC 8569 Series | Instruction Manual | Unpacking EN 7 Service Centers 1UNPACKING USA Unpack and handle this electronic equipment carefully. Phone: 800-366-2283 or 717-735-6638 Ensure that the following items are included: fax: 800-366-1329 or 717-735-6639 LTC 8569: CCTV Spare Parts •Two (2) cables with 9-pin D-sub connectors Phone: 800-894-5215 or 408-956-3853 or 3854 fax: 408-957-3198 •Connector Kit, containing eight (8) pieces of a e-mail: BoschCCTVparts@ca.slr.com twelve (12) pin connector
Summary of the content on the page No. 8
| LTC 8569 Series | Instruction Manual | Power Specifications EN 8 Two 2-meter (6 ft) data cables, for interface to Allegiant 4POWER SPECIFICATIONS main CPU bays, are supplied with the 2-channel 1 Model No. Rated Voltage Power versions; four cables are supplied with the 4-channel Voltage Range versions. These units can provide data to any device LTC 8569/60 120 VAC, 50/60 Hz 108 to 132 12 W capable of accepting biphase control code, including LTC 8570/60 120 VAC, 50/60 Hz 108 to 132 12 W the fo
Summary of the content on the page No. 9
| LTC 8569 Series | Instruction Manual | Installation EN 9 Select and maintain a wire color convention to avoid 5INSTALLATION confusion at the various camera sites. 5.1 General Code Merger units are supplied in an indoor rated Example: White to "+", Black to "-", and Shield to "S". enclosure designed to fit a standard EIA 19" rack. Install the unit in the rack using appropriate mounting Follow the standard installation instructions, provided hardware (not supplied). with the AutoDome Camera or A
Summary of the content on the page No. 10
| LTC 8569 Series | Instruction Manual | Operation EN 10 WARNING: •Removal of the cover should only be performed by qualified service personnel. Front Panel ON The unit should always be disconnected from the Dip Switch S101 mains power source before removing the cover, and remain disconnected while the cover is removed. Main board Rear Panel board • Electrostatic-sensitive device. Use proper ESD safety precautions to avoid electrostatic discharge to sensitive electronic components. Figure 2 - D
Summary of the content on the page No. 11
| LTC 8569 | Instruction Manual | Configuration Examples EN 11 7CONFIGURATION EXAMPLES Refer to Figures 3 – 6 for various connection option guidelines. 1. The control code outputs from multiple Allegiant Series Switchers are combined so that each system can control any of the common cameras. If the switcher is close enough, the supplied data interface cable may be used directly. If a switcher is beyond the distance of the supplied cable, the cable can be spliced to a user- supplied shielded twis
Summary of the content on the page No. 12
| LTC 8569 | Instruction Manual | Configuration Examples EN 12 3. A Code Merger can combine control data generated by multiple devices, each having a different or overlapping range of control code camera addresses. In this example, one Divar controls only system cameras 1 to 16. The other Divar controls only system cameras 17 to 32 (as configured per the Divar instruction manual), but the Allegiant is able to control all cameras. Up to 1.5km (5000 feet) 2 using 1mm (18AWG) Shielded Twisted Pair
Summary of the content on the page No. 13
| LTC 8569 | Instruction Manual | Pinouts EN 13 Supplied 9-Pin Data Cables 8 Pinouts (Replacement part number 303 0753 005) Male side Connection Female side Typical Wire Color (actual color CODE may vary) 1 + Code 1 Brown POWER 2 - Code 2 Red 3 Shield 3 Orange 4 Gnd 4 Yellow 5 Gnd 5 Green 6 No Connection — ———— CODE IN 1 CODE IN 2 7 No Connection — ———— CODE IN 3 CODE IN 4 8 12VAC 8 White 9 12VAC 9 Black LTC 8569 Series: 8 12-Pin Connectors LTC 8569/60 Series and LTC 8571/60 Series: 2 D-Conne
Summary of the content on the page No. 14
| LTC 8569 | Instruction Manual | EN 14 Bosch Security Systems | 15 March 2004
Summary of the content on the page No. 15
| LTC 8569 | Instruction Manual | EN 15 Bosch Security Systems | 15 March 2004
Summary of the content on the page No. 16
Bosch Security Systems, Inc. Bosch Security Systems B.V. Bosch Security Systems Pte Ltd. 850 Greenfield Road P.O. Box 80002 38C Jalan Pemimpin Lancaster, PA 17601 USA 5600 JB Eindhoven Singapore 577180 Tel: 800-326-3270 The Netherlands Republic of Singapore Fax: 1-717-735-6560 Tele +31 40 27 80000 Tel: 65 (6) 319 3486 www.boschsecuritysystems.com © 2004 Bosch Security Systems GmbH 3935 890 04213 04-12 | Updated March 15, 2004 | Data subject to change without notice.
