Summary of the content on the page No. 1
Summary of the content on the page No. 2
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................................. 3 2. FCC REQUIREMENTS .................................................................................................. 3 3. INDUSTRY CANADA REQUIREMENTS ................................................................ 4 4. INSTALLATION PRECAUTIONS .............................................................................. 4 5. GENERAL DESCRIPTION ............
Summary of the content on the page No. 3
Summary of the content on the page No. 4
(4) If the AI-900 disrupts the telephone network, the telephone company can discontinue your service temporarily. If possible, the telephone company will notify you in advance. If advance notice is not practical, they will notify you as soon as possible. You are also informed of your right to file a complaint with the FCC. (5) The telephone company can make changes in its facilities, equipment, operations, or procedures that can affect the operation of your equipment. If they do, you should be n
Summary of the content on the page No. 5
Summary of the content on the page No. 6
Summary of the content on the page No. 7
7.2. Connection and Adjustment 7.2.1. External speaker connection Follow the procedures below when connecting an external speaker (8Ω). Step 1. Remove the AI-MS900's rear terminal cover and set the internal slide switch to the [EXT. SP] position. Internal/External speaker selection switch Terminal cover EXT.SP terminal Microphone sensitivity control Internal speaker volume control Step 2. Connect the speaker cable to EXT.SP terminal. Speaker cable Step 3. Replace the removed terminal cover in pl
Summary of the content on the page No. 8
Summary of the content on the page No. 9
Summary of the content on the page No. 10
Summary of the content on the page No. 11
8.5. Calling Party Display and Selective Response 8.5.1. Calling party display The master station can only display one of up to 64 calling stations by means of its 6-digit number or 8- character name. When the master station simultaneously receives calls from two or more stations, the station with the highest priority is displayed, and other waiting stations are displayed in order of priority as the [REDIAL] key is pressed. (Substation priorities are registered by system programming.) Display p
Summary of the content on the page No. 12
Summary of the content on the page No. 13
Summary of the content on the page No. 14
Step 5. Press the new keys to register using the dialing keys [0] – [9] or function keys [ ], [#] or [REDIAL]. Example of "123456" being entered : 2 1 23456 Notes • If the [C] key is pressed before dialing a complete number, the contents before the [C] key was pressed are all erased. • Mark "-" is displayed when the [REDIAL] key is pressed. • The display shown below is an example of entering the functional number of paging. : 2 80# Step 6. Press the [PTT] key after completing the entry of the
Summary of the content on the page No. 15
Step 5. Press the [PTT] key again. The erasure is then completed, as indicated by a confirmation tone. Example of auto dialing key [2] : 2 Step 6. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode. : 11 59a m 8.6.4. Auto dialing key registration confirmation Step 1. Set the [REGISTER] switch on the master station's top panel to the ON position. The display panel will be placed in registration mode. g Re m od e – Step 2. Press the [PTT] key. The fo
Summary of the content on the page No. 16
