Summary of the content on the page No. 1
User’s Manual
IP Telephony Gateway
Model No.: SP5001A/S
http://www.micronet.info
Summary of the content on the page No. 2
Table of Contents 1. INTRODUCTION..................................................................................................................................4 1.1. OVERVIEW.....................................................................................................................................4 1.2. FEATURES .....................................................................................................................................5 1.3. DEFAULT SETTINGS.............
Summary of the content on the page No. 3
5.13. FLASH CLEAN ..............................................................................................................................60 5.14. COMMIT DATA ..............................................................................................................................60 5.15. REBOOT SYSTEM .........................................................................................................................60 6. COMMAND LIST............................................
Summary of the content on the page No. 4
About this User’s Manual This user’s guide gives hardware specifications and explains web configuration and command line configuration for the VoIP Telephony Gateway. Specifications are subject to change without notice. Online Upgrade Please refer to http://www.micronet.info/ for additional support documentation. General Syntax Conventions Mouse action sequences are denoted using a comma. For example, click start, Settings, Control Panel, Network means first you click Sta
Summary of the content on the page No. 5
1. Introduction 1.1. Overview Micronet SP5001A/S FXS Gateway is designed to connect standard telephone devices to IP-based telephony networks, providing users with high-quality VoIP service. In addition, the 10/100M switch ports can offer network connection to co-located PC or other Ethernet-based devices. No need to prepare extra hubs or switches. SP5001A/S is an ideal solution for home users or small offices. SP5001A/S is compliant with IETF RFC 3261 SIP standards, and has a built-in
Summary of the content on the page No. 6
1.2. Features ● Compliant with IETF RFC 3261 SIP standards ● Provide 1 RJ-11 FXS port for phone set or fax machine ● Provide 3-port 10/100M Ethernet switch ● Provide advanced telephony features, such as call hold, call forward and call transfer. ● Support Proxy and Peer-to-Peer Mode ● Support FAX over IP (T.38) ● Support FSK and DTMF Caller ID ● Support Static IP, DHCP and PPPoE connection ● Built-in NAT for IP sharing ● Built-in DHCP Server ● TFTP/FTP firmware upgrade ● QoS : ToS (
Summary of the content on the page No. 7
Dimension & Weight : 190 x 124 x 37 mm, 320g Certification CE, FCC 1.3. Default Settings The following are the settings of the default profile IP Parameters WAN IP Address: 10.1.1.3 Subnet: 255.0.0.0 Default gateway: 10.1.1.254 LAN IP Address: 192.168.123.123 Telnet and Web Login Password Login = root Password = Null (default) 6
Summary of the content on the page No. 8
1.4. Appearance Front Panel 1. LED Status Display Rear Panel 1. Reset Button 2. RJ-45 WAN Port 3. RJ-45 LAN Ports 4. RJ-11 FXS Interface 5. Power Jack 12V DC Note : To restore the factory default configuration settings, press and hold the Reset button on the rear panel for more than 3 seconds. Release the Reset button and wait for the gateway to reboot. 7
Summary of the content on the page No. 9
LED Status Display: LEDs Functions Status Active Description On The Power is on PWR Power Green Off The Power is off Gateway is under Proxy mode and On registered to Proxy server successfully STATUS Status Green Off Gateway is in Peer-to-Peer Mode Gateway is in Proxy mode but no Blinking register, or Gateway is booting up On The Telephone is Off-Hook TEL Green TEL Off The Telephone is On-Hook Blinking The gateway has Incoming Call On WAN Port connected Off WAN Port disconnect
Summary of the content on the page No. 10
2. Setting Up the Gateway This chapter will describe the basic connection setup and configure the gateway via your web browser through a computer. It outlines how to connect your VoIP Gateway to the LAN and the WAN. In the case of connecting a Cable Modem you must connect the coaxial cable from your cable service to the threaded coaxial cable connect on the back of the cable modem. 2.1. Connecting the SP5001A/S 1. Turn off your computer 2. Turn off the DSL or cable broadband mod
Summary of the content on the page No. 11
5. Connect the telephone handset to the TEL port (FXS port) 6. Connect the power adapter to the gateway and plug it in to a power outlet. It takes about 40 seconds to boot up completely 7. Power on your computer and DSL modem 8. Configure your PC network adapter to set to automatically get its TCP/IP configuration from the SP5001A/S via DHCP. 10
Summary of the content on the page No. 12
SP5001A/S provides DHCP server function, the Dynamic Host Configuration Protocol is a communications protocol that lets automate the assignment of Internet Protocol (IP) addresses in an organization's network. 9. Connect the SP5001A/S by typing http://192.168.123.123 in the address field of Internet Explorer or Netscape Navigator. 10. Login your gateway by enter root as user name and no password when prompted. 11
Summary of the content on the page No. 13
If network failed to access the Internet, restart your network in the correct sequence. Failure to restart your network in the correct sequence could prevent you from connecting to the Internet. 1. First, plug in and turn on the broadband modem and wait 1 or 2 minutes. 2. Second, plug in the power to your VoIP gateway and wait 1 minute. 3. Last, turn on your computer. 12
Summary of the content on the page No. 14
2.2. Internet Connection Setup This section shows the basic setup to enter the Internet connection settings provided by your ISP. Before proceeding with the Internet connection setup, you need to know the setup information for your specific type of Internet connection, for example, DSL connection or Cable connection, login name / e-mail and password, then you can configure the gateway. A. PPPoE Connection Setup For DSL users, many ISPs may require you to log on with a user name (or e
Summary of the content on the page No. 15
3. Enter your DSL login name into User Name field 4. Enter your DSL password into Password field 5. Click button 6. Select [Commit Data] and click button. 7. Select [Reboot System] and click button. Wait for the gateway to reboot, check the DSL connection status by select the [PPPoE Configuration] B. Static DSL Connection Setup A static IP address is a number (in the form of a dotted quad) that is assigned by an Internet service provider (ISP) to be its permane
Summary of the content on the page No. 16
2. Enter the IP address, Subnet and Default Gateway 3. Click button 4. Select [Commit Data] and click button. 5. Select [Reboot System] and click button. 15
Summary of the content on the page No. 17
2.3. Proxy Mode Setup You can choose either Proxy mode or Peer-to-Peer mode for communication. Proxy mode requires account information to access to the service; it’s assigned by the SIP service provider. SIP Serve rendezvous point at which callees are globally reachable, and perform registration, call routing function. The VoIP gateway (or IP phone) of the users in the domain register their IP addresses with the server so that the other users can reach them. Proxy Mode also suit for the ga
Summary of the content on the page No. 18
2. Enter the Proxy Server’s IP address or URL. For example, 220.130.173.70 or sip.micronet.info 3. Enter the Line Number 4. Enter the Account. It can be same as the Line number, the user name or the e-mail account. Check with your VoIP service support for the details. 5. Enter the Password 6. Click button 7. Select [Commit Data] and click button. 8. Select [Reboot System] and click button. After reboot the SP5001A/S, check the Status LED, it shows the gateway has r
Summary of the content on the page No. 19
2.4. Peer-to-Peer Mode Setup P2P Mode doesn’t require any centralized control units like Proxy Mode does, it makes communication between two end-points directly, [Phone Book] needs to configure to work with in P2P Mode. It requires direct public IP access, it can also perform the job behind the NAT device with static public IP connection, but it can not work behind the NAT device with the dynamic IP connection. 1. Select the [SIP Information] at the Configuration Menu section
Summary of the content on the page No. 20
2. Enter the Line Number The Line Number is same as an extension number from of PABX system. You can create your own extension numbering plan for your VoIP system. 3. Click button 4. Select the [Phone Book] at the Configuration Menu section 19
