Cornelius Pre-Mix Dispenser Universal C-750 user manual

Summary of the content on the page No. 1

IMI CORNELIUS INC.
One Cornelius Place
Anoka. MN 55303-6234
Telephone (800) 238–3600
Facsimile (763) 422–3246
WATER TANK SEAL KIT (P/N 308979000)
on
UNIVERSAL C-750 PRE-MIX DISPENSER
These Instructions outline installation of the Water Tank Seal Kit (P/N 308979000) on the Universal C-750
Pre-Mix Dispenser.
1
1
3
2
NO TAG
4
5
INSULATED
REFRIGERATION
LINE
DISPENSER
November 13, 2002
IMI Cornelius Inc, 1989–2002
185211001
Revision: A

Summary of the content on the page No. 2

Summary of the content on the page No. 3

NOTE: Only qualified personnel should install this kit. 1. Unpack loose–shipped parts. Make sure all parts are present and in good condition. Table 1. Loose-Shipped Parts Item No. Part No. Name Qty. 1 200468012 Sheet Metal Screw, Phil Truss Hd, No. 8 by 3/4-in. 12 2 308981044 Front Cover Plate 1 3 308982044 Back Cover Plate 1 4 313093000 Plug, 2-in. 1 5 172127000 Plug 1 6 960265000 Permagum Sealer,12-in. long 1 8 960115000 Rubatex Insulation,1/8 by 1/2-in. (78-in. long) 1 INSTALLING WATER TANK S

Summary of the content on the page No. 4

11. If installing kit on a four-flavor Dispenser, install PLUG (item 5) in 1/2-inch hole in top of agitator motor plate. 12. Fill area between insulated refrigeration line and cutout area in front cover plate with PERMAGUM SEAL- ER (item 6). Also, overlap front cover plate and insulated refrigeration line with permagum sealer to prevent water leak. 13. If new Dispenser installation, refer to manual provided with Dispenser and complete installation as instructed. 14. Install Dispenser top cover a

Summary of the content on the page No. 5