Pelco C6825 user manual

Summary of the content on the page No. 1

INSTALLATION/OPERATION
C6806 and C6825
®
Prewired Cables
C936M-A (6/04)

Summary of the content on the page No. 2

DESCRIPTION ® The C6806 and C6825 are prewired cables used to connect Pelco’s CX9024RX Coaxitron receiver with Pelco’s PT680-24P pan/tilt. These cables operate the pan/tilt in a noninverted mode. MODELS C6806 Six-foot (1.82 m) cable for use with PT680-24P, PT680-24SL pan/tilts and non-preset receivers (not for inverted operation) C6825 Same as C6806 except 25-foot (7.62 m) cable length INSTALLATION 1. Run the cable from the receiver to the pan/tilt. Be careful not to abrade or cut the jacket on

Summary of the content on the page No. 3

TROUBLESHOOTING 1. If none of the functions operate correctly, check the connection of the connectors to the receiver and pan/tilt. 2. If the connections are loose, tighten the lock ring on the connectors and then retest the pan/tilt functions. 3. If the connections are tight, check the Coaxitron receiver to determine if it is operating correctly. If the Coaxitron receiver is operating correctly, there may be a problem with the cable. Contact Pelco for further technical troubleshooting aid. NOTE

Summary of the content on the page No. 4

WARRANTY AND RETURN INFORMATION WARRANTY If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to Pelco will repair or replace, without charge, any merchandise proved defective in material or obtain a Repair Authorization number (RA), and provide the following information: workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: 1. Model and serial number 2. Date of shipment, P.O. number, Sales