Summary of the content on the page No. 1
USB 802.11b Wireless LAN Adapter
M73-APO01-700
Installation
Install the Driver & Utility
Note: Always remember to install the Driver
& Utility before you plug USB cable into the
PC’s USB port.
In Windows 98SE/ME
For Windows 98SE users: As you perform the
installation, have your system operating
CD-ROM at hand. You may be asked to insert
the OS CD-ROM for the system to download a
specific driver.
1. Insert the supplied CD-ROM into the
CD-ROM drive. Double click on Setup.exe to
inst
Summary of the content on the page No. 2
USB 802.11b Wireless LAN In Windows 2000 1. In the Welcome screen, click Next. 2. Click Next; Windows will copy all the necessary files to your system. 3. In the Digital Signature Not Found window, click Yes to continue. 4. Restart your computer. In Windows XP 1. In the Welcome screen, click Next. 2. Click Next; Windows will copy all the necessary files to your system. 3. Click Continue Anyway to proceed. 1-2
Summary of the content on the page No. 3
USB 802.11b Wireless LAN Install the Device 1. Plug the square end (Type B) of USB cable into the adapter's USB port. 2. Plug the rectangle end (Type A) of USB cable into the PC's USB port 3. After installing the Wireless USB Adapter, Windows will automatically detect the new device. Follow the on-screen instruction to install. Note for Windows 2000 users: During the installation, when the “Digital Signature Not Found” screen appears, click “Yes” to continue. Note for Windows XP u
Summary of the content on the page No. 4
USB 802.11b Wireless LAN 2. Once the “Please insert the disk labeled ‘Windows 98 Second Edition CD-ROM ’, and then click OK” window appears, click OK. 3. Select the correct drive and click OK. 4. Windows will copy all the necessary files to your system. 1-4
Summary of the content on the page No. 5
USB 802.11b Wireless LAN 5. Windows will auto-detect the 802.11b USB Adapter promptly as the icon showed below. In Windows ME 1. Windows will auto-detect the 802.11b USB Adapter and a “New Hardware Found” window will show up. 2. Windows will auto-detect the 802.11b USB Adapter promptly as the icon showed below. 1-5
Summary of the content on the page No. 6
USB 802.11b Wireless LAN In Windows 2000 1. In Digital Signature Not Found window, click Yes to continue. 2. Windows will auto-detect the 802.11b USB Adapter promptly as the icon showed below. In Windows XP 1. Windows will auto-detect the 802.11b USB Adapter and a “Found New Hardware Wizard” window will show up. Select “Install the software automatically (recommended)”. Click Next to continue. 1-6
Summary of the content on the page No. 7
USB 802.11b Wireless LAN 2. Wait and the Wizard will search for the 802.11b USB Adapter. 3. Click Continue Anyway to proceed. 1-7
Summary of the content on the page No. 8
USB 802.11b Wireless LAN 4. Click Next; Windows will copy all the necessary files to your system. 5. Click Finish to complete the installation. 1-8
Summary of the content on the page No. 9
USB 802.11b Wireless LAN 6. Windows will auto-detect the 802.11b USB Adapter promptly as the icon showed below. Configuration Once the driver and utility has been installed, and the device is properly connected to your computer, you can now start using this device with the default settings. However, if you’d like to change settings in the utility, you can refer to user manual saved in the CD-ROM for the corresponding section to perform more advanced configuration. 1-9
Summary of the content on the page No. 10
1-1
Summary of the content on the page No. 11
USB Flash Disk (Optional) Install Driver Windows 98/98SE – Install from CD ROM In Windows 98/98SE, you will need to install the driver found on the CD that comes with this device. Run Flash Driver.exe. 1. Follow the on-screen instructions to proceed. 2. Click Finish to complete the installation. 3. After the installing process is finished, remove the cap from your USB Flash Dish and plug the USB connector to the USB port on your computer. 2-1
Summary of the content on the page No. 12
USB Flash Disk 4. Open My Computer and you will see a newly added icon; shown on the screen as a removable disk drive. Windows ME/2000/XP-No Driver is Required This device is Plug and Play compliant, therefore, once you plug it into your Window’s based system, your system will automatically detect it as a removable hard disk. You can go to My Computer to check if there is a newly added icon. If yes, it is ready for use. If not, you may have to check if the USB Flash Disk is connec
Summary of the content on the page No. 13
USB Flash Disk Manage your USB Flash Disk Main Menu 1. Load the included CD and open it. Double-click MYKEY. 2. An USB Flash Disk icon will appear on your desktop , a Star icon will also appear on the bottom right corner of the task bar on your screen. . 3. Right-click the icon. 4. Click Option. The USB Flash Disk Utility will appear. 5. The USB Flash Disk Utility consists of four tabs for management. See the following for details as how to use and manage this device. 2-3
Summary of the content on the page No. 14
USB Flash Disk Disk Manager Disk Manager is readable only. On this box, you will know the used/free capacity of your flash disk. Disk Partition In this box, you can divide the USB Flash Disk into two partitions: Un-protected Disk Space: all data located here is accessible to anyone who uses your computer or Flash Disk. When logging out of the protected area you are automatically redirected to the Un-protected Disk area. Protected Disk Space: this area is password protected
Summary of the content on the page No. 15
USB Flash Disk 2. Press Create Partition. 3. A warning message appears to advise that all data on the disk will be erased. You can cancel this action by clicking Cancel. Or click OK to continue. 4. Click Cancel to copy your data to a Hard Disk before creating your prtition. Click OK to create your partition. Any and all Data stored on your Flash Disk will be destroyed. 2-5
Summary of the content on the page No. 16
USB Flash Disk Switch between Protected and Un-protected Disks Enter the Protected Disk 1. Right click . Select Login . 2. You are prompted to enter your password. The default password is 0000. It is suggested that you set your own password. If you forget your password, press to get see your password hint. 2-6
Summary of the content on the page No. 17
USB Flash Disk Once you enter the protected disk, the disk icon shown in My Computer will change from to , and vise versa. Enter the Un-protected Disk 1. Right click . Select Logout to enter the Un-protected Disk. Password Manager Password can be changed in this box. You can also set a password hint for use if you forget your password. Default password is set to: 0000 2-7
Summary of the content on the page No. 18
USB Flash Disk Change Password 1. Enter the “Old Password”, the default is “0000”. 2. Enter the “New Password”. (Maximum 4 characters long – use letters or numbers) 3. Confirm password by re-entering the new password. 4. Enter a hint of your own; this will be helpful to remind you if you forget your password. 5. Press Change to continue. 6. Password has been changed message appears. Click OK. Password Hint You can leave the Password Hint blank if you don’t want to use it.
Summary of the content on the page No. 19
USB Flash Disk Plug-in USB Flash Disk This means that you have to plug this USB Flash Disk into your computer’s USB port in order to open your PC; Plug-in USB Flash Disk and Input Password This means to open the PC, you are required not only to plug the USB Flash Disk, but also have to enter your password. To lock a PC 1. Right click . 2. Select Option PC-Lock Setting. 3. Check Enable PC-Lock. 2-9
Summary of the content on the page No. 20
USB Flash Disk 4. Select the Unlock Condition that fits your needs. 5. Press Change. 6. Press Exit. 7. Return to your desktop and right click again. 8. Move the cursor to PC Lock You PC is now locked. 9. If this function is enabled, your PC will not respond unless this USB Flash Disk is plugged in. To unlock a PC 1. Plug the USB Flash Disk into the locked PC. 2. If the unlock condition is set to Plug-in USB Flash Disk and Input Password, a password box will pop up. 3. Enter
