Adder Technology Adder SmartView SV2 user manual

User manual for the device Adder Technology Adder SmartView SV2

Device: Adder Technology Adder SmartView SV2
Category: Network Card
Manufacturer: Adder Technology
Size: 0.83 MB
Added : 4/5/2014
Number of pages: 34
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Adder Technology Adder SmartView SV2. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Adder Technology Adder SmartView SV2.

For your convenience

If looking through the Adder Technology Adder SmartView SV2 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Adder Technology Adder SmartView SV2 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Adder Technology Adder SmartView SV2 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Adder Technology Adder SmartView SV2 User manual - Online PDF
Advertisement
« Page 1 of 34 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Adder Technology Adder SmartView SV2 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Adder Technology Adder SmartView SV2. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

V Viie ew w
SMART
SMART View 4 SV4
SMART View 2 SV2
www.addertec.com
I
N
S
T
A
L
L
A
T
I
O
N
&
U
S
E
V Viie ew w
SMART

Summary of the content on the page No. 2

About this manual SmartView - Installation and Use Sixth edition (April 1999) Part No. ADD0026/6 (c) 1999 Adder Technology Ltd. All rights reserved. Whilst every precaution has been taken in the preparation of this manual, Adder Technology Ltd assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. We reserve the right to change the specifications, functions and circuitry of the product without no

Summary of the content on the page No. 3

Radio Frequency Energy Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. European EMC directive 89/336/EEC This equipment has been tested and found to comply with the limits for FCC Compliance Statement (United States) a class B computing device in accordance with the specifications in the European standard EN55022. These limits are designed to This

Summary of the content on the page No. 4

Contents 1. Introduction..................................................................................... 5 1.1 Key features........................................................................................... 5 1.2 Package contents................................................................................... 6 1.3 Product information ............................................................................... 6 2. Installation...................................................

Summary of the content on the page No. 5

4. SmartView configuration options................................................. 21 4.1 Screen saver time delay ........................................................................ 21 4.2 Display options ...................................................................................... 21 4.3 Autoscan lock on mode and delay time ................................................ 22 4.4 Mouse mode and mouse switching of channels .................................... 23 4.5 Keyboard hotkey

Summary of the content on the page No. 6

1. Introduction Thank you for purchasing the Adder SmartView. Your SmartView is a high performance keyboard, monitor and mouse sharing device which supports a wide range of PC hardware and software platforms. 1.1 Key features Control multiple PCs from a single keyboard, monitor and mouse. SmartBoot feature automatically boots all machines during power up. Mixed AT/PS2 keyboards and PS2/RS232 mice supported as standard. Can be cascaded without limitation to provide a video switching network.

Summary of the content on the page No. 7

1.2 Package contents SmartView. Power supply suitable for your country. This installation guide. 1.3 Product information Fig. 1(a). SmartView (SV4 version supporting 4 PCs) SmartView Installation and Use Page 6

Summary of the content on the page No. 8

Fig. 1 (b). SmartView (SV2 version supporting 2 PCs) Fig. 1 (c) - Remote control pad / display (optional accessory for 4 port models) SmartView Installation and Use Page 7

Summary of the content on the page No. 9

2. Installation 2.1 What you will need Cables to connect the SmartView to each of your PC keyboard, video and mouse ports. Cable specifications are given in appendix A. (You do not need to connect a mouse cable if you are not using the mouse). A monitor with a standard VGA/SVGA (15 pin) connector that will work when connected directly to each of your PCs. SmartView supports low and high resolution monitors. A standard AT or PS/2 style keyboard. If you are using an AT keyboard with a 5 pin

Summary of the content on the page No. 10

Use of PS/2 and RS232 style mice with the SmartView - All of the mouse connections from SmartView to PCs support either a PS/2 or an RS232 mouse. SmartView automatically converts from the PS/2 mouse commands to RS232 serial mouse commands. Serial mice types are selected by using an adapter as described ® in Appendix A. This adapter is the same as is shipped with Microsoft auto-sensing mice. The SmartView will operate without a mouse connected if you do not wish to use one. 2.2 Mounting the Smart

Summary of the content on the page No. 11

the monitor and each of the computers in turn. Failure to switch the SmartView and computers on in the correct order can lead to the mouse and/or keyboard not being recognised by the computers when they are switched on. 2.4 Configuring your PCs Configure you PC in the same way that you would if your keyboard, mouse and monitor were all connected directly to your PC, but bearing in mind the following points: SmartView emulates Microsoft compatible serial, IntelliMouse and PS/2 mice, so ensure t

Summary of the content on the page No. 12

In configure mode, options are entered by typing a letter followed by a number followed by (enter). Use ESC to abort the entry of an option. The SmartView will remain in configure mode until you type 'E' (enter). For example: to set hotkey option 2 type the following at the 'C' prompt (at SmartView 'C' prompt) H H2 2 e e To exit configure mode type: E Ee e 2.6 Summary of SmartView configuration options Full details of each of the configuration options and their uses are given in section 4. B1 -

Summary of the content on the page No. 13

T1 - 2 seconds autoscan delay time before switching to next port (default) T2 - 5 seconds autoscan delay time before switching to next port T3 - 7 seconds autoscan delay time before switching to next port T4 - 10 seconds autoscan delay time before switching to next port T5 - 15 seconds autoscan delay time before switching to next port T6 - 20 seconds autoscan delay time before switching to next port T7 - 30 seconds autoscan delay time before switching to next port T8 - 60 seconds autoscan delay

Summary of the content on the page No. 14

P - Sets password - see section 4.7 for instructions. E - Exits configure mode and returns the SmartView to normal operation mode. 2.7 Other useful installation information PC boot up sequence - When your PCs are powered on they communicate with any attached keyboards and mice and setup parameters required by the particular operating system. It is necessary for the SmartView to be attached and powered on during this sequence so that it can give the required responses and keep track of all the mo

Summary of the content on the page No. 15

With the PS/2 mouse disconnected, change the channel using the keypad or keyboard hotkeys. The SmartView detects that the mouse has been disconnected and triggers the automatic recovery system. Plug in the PS/2 mouse and the SmartView will re-initialise it. 2.9 Hot plugging the SmartView into running systems and re- enabling disconnected CPU PS/2 mouse connections It is adviseable to switch off the systems that are going to be connected to the SmartView before installation. However if this is no

Summary of the content on the page No. 16

Type of mouse / system Driver type Likely expected Suggested Connected at bootup data format restoration PS/2 PS/2 only PS/2 F5 PS/2 IntelliMouse PS/2 F5 IntelliMouse / SmartView PS/2 only PS/2 F5 IntelliMouse / SmartView IntelliMouse IntelliMouse F6 To restore lost mouse movement on a CPU connected to the SmartView: 1) Select the CPU that has lost its mouse movement 2) Press the select key on the front of the SmartView for 5 seconds until ‘C’ is displayed. You are now in configure mode. 3) To r

Summary of the content on the page No. 17

3. Using the SmartView This section explains the general operation of the SmartView. We recommend that you read this section before starting to use the product. 3.1 Power on status At power on the SmartView selects PC number 1 and displays '1'. If a password has been set then ‘P’ will be displayed and the SmartView will remain locked until a valid password is entered. 3.2 Front panel key and remote controller The front panel key is used to select which channel is currently connected to the share

Summary of the content on the page No. 18

3.4 Keyboard hotkey control SmartView can be conveniently controlled by selecting channel, autoscan mode or security locking from the keyboard. All of the hotkey control commands are invoked by holding down the two hotkeys and then pressing a command key. By default, the two hotkeys are ‘CTRL’ and ‘ALT’, although other combinations can be selected by reconfiguring the hotkeys (see section 4.5). Once the hotkey command has been activated you will need to release the hotkeys and the command key be

Summary of the content on the page No. 19

channels (see section 4.9) then only the active channels will be selected. Otherwise the SmartView will cycle through all channels when using HOTKEYs + TAB. The hotkey command are summarised below (note that the numbers on the numeric keypad do not form part of a valid hotkey) : ‘HOTKEYs’ and ‘1’ - selects channel 1 ‘HOTKEYs’ and ‘2’ - selects channel 2 ‘HOTKEYs’ and ‘3’ - selects channel 3 ‘HOTKEYs’ and ‘4’ - selects channel 4 ‘HOTKEYs’ and ‘TAB’ - selects the next active channel if the SmartVi

Summary of the content on the page No. 20

To 'tab through' channels: ba bav v v v v press release press v v v vba release press release 3.5 Mouse control The channels can conveniently be changed on ADDERview by using a three button mouse. In order to switch to the next channel simply hold down the central mouse button (the wheel mouse button on an IntelliMouse) and click on the left hand mouse button. The channel will then change. If the SmartView has been set to scan active ports then the next active channel will be selected. If it h


Alternative user manuals
# User manual Category Download
1 Adder Technology AdderView CATx CATX-PS2A User manual Network Card 2
2 Adder Technology AdderLink AV Series User manual Network Card 2
3 Adder Technology AdderView CATx CATX-USBA User manual Network Card 2
4 Adder Technology AdderView CATx AVX4016 User manual Network Card 2
5 Adder Technology AdderView CATx CATX-USB User manual Network Card 1
6 Adder Technology Adder SmartView SV4 User manual Network Card 1
7 Adder Technology AdderView CATx 1000 User manual Network Card 8
8 Adder Technology AdderView CATx EPS-S8 User manual Network Card 0
9 Adder Technology AdderView CATx CATX-PS2 User manual Network Card 0
10 Adder Technology GEMAV4GEM User manual Network Card 2
11 Adder Technology AdderView CATx X200AS/R User manual Network Card 8
12 Adder Technology AdderView CATx X100AS/R User manual Network Card 1
13 Adder Technology SMARTVIEW PRO SV16PRO User manual Network Card 0
14 Adder Technology SMARTVIEW PRO SV12PRO User manual Network Card 0
15 Adder Technology AdderView CATx X100A/R User manual Network Card 2
16 Sony BTA-NW1A User manual Network Card 2
17 Sony BKMW-E3000 User manual Network Card 2
18 Sony AC-SQ950D User manual Network Card 0
19 Sony BBV RX100 User manual Network Card 3
20 Sony CLIE A-AVZ-100-11 User manual Network Card 1