Infinity Wireless USB Adapter WLI-U2-G300N user manual

User manual for the device Infinity Wireless USB Adapter WLI-U2-G300N

Device: Infinity Wireless USB Adapter WLI-U2-G300N
Category: Network Card
Manufacturer: Infinity
Size: 1.66 MB
Added : 5/4/2013
Number of pages: 43
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Infinity Wireless USB Adapter WLI-U2-G300N. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Infinity Wireless USB Adapter WLI-U2-G300N.

For your convenience

If looking through the Infinity Wireless USB Adapter WLI-U2-G300N user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Infinity Wireless USB Adapter WLI-U2-G300N on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Infinity Wireless USB Adapter WLI-U2-G300N to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Infinity Wireless USB Adapter WLI-U2-G300N User manual - Online PDF
Advertisement
« Page 1 of 43 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Infinity Wireless USB Adapter WLI-U2-G300N but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Infinity Wireless USB Adapter WLI-U2-G300N. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

User Manual
AirStation Nfiniti
Draft-N Wireless USB Adapter
WLI-U2-G300N
v1.0

Summary of the content on the page No. 2

Getting Started • Insert the AirNavigator CD into the CD-ROM drive of your computer. The AirNavigator Setup Wizard should launch automatically. • To launch the AirNavigator Setup Wizard manually, click Start, then Run. Type “D:\ Setup.exe”, where D is the drive letter assigned to your CDrom. • Click OK to launch the wizard. 2

Summary of the content on the page No. 3

Installing Drivers • Select Install Wireless Drivers. 3

Summary of the content on the page No. 4

Installing Drivers • Click Next to install a driver for the USB adapter. • Select Agree and click Next to continue the process after reviewing the license agreement. • A window will appear prompting the insertion of the Wireless Adapter. Plug the included cable into the Nfiniti AirStation Wireless USB Adapter and your PC’s USB port. 

Summary of the content on the page No. 5

Installing Wireless Drivers • When the ‘Found New Hardware Wizard’ launches, click Next to run the wizard. • If the ‘Digital Signature Not Found’ page opens, click Yes. • When the Wireless USB Adapter is successfully installed, click Finish. Restart your computer if prompted. 

Summary of the content on the page No. 6

Connecting Wireless Clients to your Network Buffalo supports three different methods for connecting your wireless client device to your network. If your AP supports it, use the simple, utterly secure AOSS to connect. Install the Client Manager from your AirNavigator CD (page 7) and turn to page 10. You may also use the Client Manager software from your AirNavigator CD to configure your network manually. See page 15 for more on Client Manager. If you’re running Windows XP on your PC,

Summary of the content on the page No. 7

Client Manager Client Manager can be used to survey and connect to available access points, configure WPA/WEP encryption, and create connection profiles. Note: When Client Manager is installed, Windows XP Wireless Zero Configuration is automatically disabled. Installing Client Manager Insert the AirNavigator CD into the CD- ROM drive of you computer. If the Air Navigator Setup Wizard does not launch automatically, launch it manually by clicking Start and then Run. Enter D:\ Setup.exe in the

Summary of the content on the page No. 8

Client Manager • Once the Client Manager Installer launches, click Next. • Press Agree to accept the license agreement and continue installation. 

Summary of the content on the page No. 9

Client Manager • Click OK when Client Manager installation is complete. • Press Exit Setup to exit AirNavigator. • Client Manager is now installed and running. Right-click on its icon (the black antenna) to use it. 

Summary of the content on the page No. 10

Using AOSS AOSS (AirStation One-Touch Secure System) is a simple, one-touch setup for connecting wireless clients to an access point while enforcing the most secure possible connection encryption type. Users no longer need to worry about choosing the proper security protocols, IP addresses, or SSID. AOSS determines the optimal connection and configures itself in seconds. If your router doesn’t support AOSS, turn to page 6 to configure your connection manually with Client Manager or

Summary of the content on the page No. 11

Using AOSS • From the Status Screen, select the Profiles tab. • Click the blue AOSS button on the Client Manager’s screen. The AOSS wizard will appear. • Now, press the AOSS button on the Access Point. Hold it down until the AOSS LED begins to flash. 11

Summary of the content on the page No. 12

Using AOSS Once AOSS is complete (about 30 seconds), the connection is archived as a profile for later use. To minimize Client Manager to the system tray, click the ‘X’ in the top right corner. Notes: AOSS will scan for an AOSS partner for about two minutes. If it times out before finding one, just press the AOSS buttons again. Output power is reduced to 25% of normal during AOSS for security reasons. If you’re having trouble making an AOSS connection, temporarily move the devices closer to

Summary of the content on the page No. 13

Client Manager Configuration You may use Client Manager to configure your wireless network. Client Manager consists of the Status page, the Survey page, and the Profiles page. You can access each page by clicking the corresponding button on Client Manager. In addition to these pages, several dialog boxes are also available. You can access the Edit Profile dialog box, New Profile dialog box, IP Configuration dialog box, or WEP Configuration dialog box using the Client Manager pages. You may

Summary of the content on the page No. 14

Client Manager Configuration • Network Type - Displays whether network is in Ad-Hoc or Infrastructure mode. • Rate – The speed of communication between wireless devices. If the Client Manager is not connected to a remote wireless device (access point or another client), no rate will be displayed. • Channel – The channel that the two wireless clients are using for communication. If the Client Manager is not connected to a remote wireless device, no channel will be displayed. Channels 1

Summary of the content on the page No. 15

Client Manager Configuration Click the Scan tab to open this page. Here, you can survey the area, display available access points, and connect to available access points. This page includes the following components: • Wireless SSID – The SSID is the “name” of a wireless network. Each wireless device on a network must use identical SSIDs to successfully communicate. • Wireless Mode – Displays available modes for each available remote wireless device. • Strength – Displays the relative sign

Summary of the content on the page No. 16

Client Manager Configuration This dialog will open for you to enter any necessary encryption information. The correct encryption type should already be selected automatically in the Encryption Method drop down list. Only change this setting if necessary. The Encryption Key is where the actual key for the wireless network should be entered. Some wireless networks allow you to enter multiple keys; four separate fields are available for this. If your network only uses one encryption key

Summary of the content on the page No. 17

Client Manager Configuration Profiles Page Click the Profiles tab to open this page. Use this page to access your profiles. Profiles allow you to save the information associated with a specific wireless network so you can quickly and easily connect to that network when you are in that location. The Profiles page allows you to add, delete, and edit your profiles, as well as import and export data. • Connect – Click the Connect button to connect to the selected profile and return to the

Summary of the content on the page No. 18

Client Manager Configuration New Profile Dialog Box • Select Profile – Select whether the profile is for a wireless or wired connection. • Profile Name – Enter the name you want to associate with the new profile. • Network Type – Select the network mode you want to associate with the new profile. Select Infrastructure if your network consists of both wired and wireless devices that communicate through a central device, such as an access point. Select Ad-hoc if your network consists of only

Summary of the content on the page No. 19

Client Manager Configuration Advanced Profile Options • Network Tab – Displays the network information tab. A static IP can be specified for this wireless profile here. It is not recommended to change any of these settings unless specified by an administrator. • Browser Tab – Displays settings to change your browser preferences for this wireless profile. A specific home page can be specified when connected to this wireless profile as can specific proxy server addresses. • Printers Tab –

Summary of the content on the page No. 20

Zero Configuration Service Windows XP includes the Zero Configuration Service, a built in service to configure your wireless clients from within Windows. Turn to page 7 if you would rather use Buffalo’s Client Manager to configure your wireless client. • If the Wireless Zero Configuration Service is activated, Windows will scan for available wireless access points once the Wireless USB Adapter is properly installed. If Windows detects one or more access points, a networking icon appears


Alternative user manuals
# User manual Category Download
1 Sony BTA-NW1A User manual Network Card 2
2 Sony BKMW-E3000 User manual Network Card 2
3 Sony AC-SQ950D User manual Network Card 0
4 Sony BBV RX100 User manual Network Card 3
5 Sony CLIE A-AVZ-100-11 User manual Network Card 1
6 Sony BTA-NW1 User manual Network Card 11
7 Sony AC-NWUM50 User manual Network Card 1
8 Sony AR-B1474 User manual Network Card 2
9 Sony BKM-FW32 User manual Network Card 1
10 Sony 4000CL-MAV-PBIO User manual Network Card 1
11 Sony FA-ST1AM User manual Network Card 0
12 Sony MVC-FDR3/FDR3E User manual Network Card 1
13 2Wire third-party wireless Ethernet adapters User manual Network Card 1
14 3Com 10/100BASE-T4 PCI User manual Network Card 1
15 3Com 3C389 User manual Network Card 0