Summary of the content on the page No. 1
USER’S
GUIDE
Ultra320 SCSI
Host Adapters
April 2004
Version 2.2
®
DB15-000192-03
Summary of the content on the page No. 2
Electromagnetic Compatibility Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Summary of the content on the page No. 3
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB15-000192-03, Version 2.2 (April 200
Summary of the content on the page No. 4
iv Version 2.2 Copyright © 2002–2004 by LSI Logic Corporation. All rights reserved.
Summary of the content on the page No. 5
Preface This document is the user’s guide for all LSI Logic Ultra320 SCSI Host Adapters. It contains a functional description of the Ultra320 SCSI host adapters as well as physical and electrical specifications. It also contains instructions for installing the host adapters and for connecting SCSI devices to them. Audience This document assumes that you have some familiarity with SCSI protocol and related support devices. This document benefits people installing and using the various Ultra320 SCSI
Summary of the content on the page No. 6
Related Publications LSI53C1020/1020A PCI to Ultra320 SCSI Controller Technical Manual, Document No. DB14-000176-06 LSI53C1030 PCI to Dual Channel Ultra320 SCSI Multifunction Controller Technical Manual, Document No. DB14-000156-05 Fusion-MPT™ Device Management User’s Guide, Document No. DB15-000186-01 Integrated RAID User’s Guide, Document No. DB15-000292-00 Revision Record Version Date Remarks 1.0 9/2001 This release provides information about the LSI22320-R, LSI21320, and LSI20320 Ultra320 SC
Summary of the content on the page No. 7
Contents Chapter 1 Quick Installation Procedures 1.1 General Description 1-1 1.2 Quick Host Adapter Installation 1-2 1.3 Quick Windows Driver Installation 1-4 Chapter 2 Detailed Host Adapter Installation 2.1 Installing Your Ultra320 SCSI Host Adapter 2-2 2.1.1 Selecting a PCI Slot 2-2 2.1.2 Inserting the Host Adapter 2-3 2.2 SCSI Device Cables 2-5 2.2.1 Internal SCSI Cables 2-5 2.2.2 External SCSI Cable 2-5 2.3 Connecting SCSI Devices 2-7 2.3.1 Connecting Internal SCSI Devices 2-7 2.3.2 Connecti
Summary of the content on the page No. 8
3.1.3 LSI21320 Dual Channel Host Adapters 3-6 3.1.4 LSI22320 Dual Channel Host Adapters 3-8 3.1.5 LSI22320E Dual Channel Host Adapters 3-10 3.2 Host Adapter Characteristics 3-12 3.3 Technical Specifications 3-12 3.3.1 Electrical Characteristics 3-12 3.3.2 Thermal and Atmospheric Characteristics 3-13 3.3.3 Safety Characteristics 3-13 Appendix A Glossary of Terms Customer Feedback viii Contents Version 2.2 Copyright © 2002–2004 by LSI Logic Corporation. All rights reserved.
Summary of the content on the page No. 9
Figures 2.1 Hardware Connections for the Host Adapter 2-3 2.2 Inserting the Host Adapter 2-4 2.3 SCSI Cable – 68-Pin High Density with Terminator 2-5 2.4 SCSI Cable – 68-Pin High Density without Terminator 2-5 2.5 SCSI Cable – 68-Pin VHDCI to 68-Pin VHDCI 2-6 2.6 SCSI Cable – 68-Pin VHDCI to 68-Pin HD 2-6 2.7 SCSI Cable – 68-Pin HD to 68-Pin HD 2-6 2.8 Connecting Internal SCSI Cable to Host Adapter 2-7 2.9 Connecting Multiple Internal SCSI Devices 2-8 2.10 SCSI LED Connector 2-9 2.11 Connecting
Summary of the content on the page No. 10
x Version 2.2 Copyright © 2002–2004 by LSI Logic Corporation. All rights reserved.
Summary of the content on the page No. 11
Chapter 1 Quick Installation Procedures This chapter contains general information about Ultra320 SCSI controllers and host adapters. It provides quick host adapter installation instructions and SCSI bus setup for experienced computer users. It also provides quick installation instructions for Windows device drivers. This chapter includes these topics: • Section 1.1, “General Description” • Section 1.2, “Quick Host Adapter Installation” • Section 1.3, “Quick Windows Driver Installation” 1.1 Gener
Summary of the content on the page No. 12
Installing any of these host adapters in your PCI/PCI-X/PCI Express system allows you to connect up to 15 SCSI devices per channel over a SCSI bus. The LSI20320L-R is designed with a bracket that is suitable for low profile applications. To achieve Ultra320 SCSI performance, you must connect only Low Voltage Differential (LVD) devices to the host adapter. If you connect single-ended (SE) devices and LVD devices, the entire bus drops to the lower SE speed, limiting bus performance to Ultra SCSI. T
Summary of the content on the page No. 13
Step 3. Be sure to touch a grounded metal surface to discharge static electricity before handling the host adapter. Step 4. Remove the host adapter from its packaging and examine it for any damage. Step 5. Locate an unused PCI/PCI-X/PCI Express slot. Step 6. Insert your SCSI host adapter into the selected slot. Step 7. Connect the internal and external SCSI devices to connectors on one SCSI channel. Step 8. Install SCSI bus terminators at the ends of the SCSI bus. The SCSI bus must be properly t
Summary of the content on the page No. 14
1.3 Quick Windows Driver Installation To load the SYMMPI.SYS miniport driver during a new Windows NT, Windows 2000, Windows XP, or Windows .NET system installation, you can boot directly from the Microsoft installation CD-ROM. The Windows drivers are not interchangeable; however, the instructions are very similar. To install a new Windows operating system and its appropriate device driver, follow these steps: Step 1. Have the Microsoft Windows driver diskette available to insert into drive A whe
Summary of the content on the page No. 15
Chapter 2 Detailed Host Adapter Installation This chapter provides detailed instructions on how to install the LSI Logic Ultra320 SCSI host adapters and includes these topics: • Section 2.1, “Installing Your Ultra320 SCSI Host Adapter” • Section 2.2, “SCSI Device Cables” • Section 2.3, “Connecting SCSI Devices” • Section 2.4, “Terminating the SCSI Bus” • Section 2.5, “Setting SCSI IDs” • Section 2.6, “Completing the Installation” • Section 2.7, “Setting Up Integrated RAID (IR) Solution” Ultra320
Summary of the content on the page No. 16
2.1 Installing Your Ultra320 SCSI Host Adapter This section provides detailed instructions for installing your Ultra320 SCSI host adapter and connecting your SCSI devices to it. The following illustrations show the LSI22320-R Dual Channel Ultra320 SCSI host adapter. However, these illustrations apply to all host adapters. For details on all the Ultra320 SCSI host adapters, refer to Chapter 3, “Ultra320 SCSI Host Adapter Characteristics.” 2.1.1 Selecting a PCI Slot Follow these steps to locate a
Summary of the content on the page No. 17
Figure 2.1 Hardware Connections for the Host Adapter Channel A 68-Pin Internal High Density (HD) Channel A & B SCSI Interface Busy LED J6 Connector J5 Connector Channel B 68-Pin Internal HD SCSI Interface J4 Connector Channel B 68-Pin External Very High Density Cable Interconnect (VHDCI) SCSI J3 Connector Channel A 68-Pin External VHDCI SCSI J1 Card Connector J2 Connector Universal Type Board Edge PCI/PCI-X/PCI Express Bus to Mainboard Step 5. Find an unused PCI/PCI-X/PCI Express slot. Note:
Summary of the content on the page No. 18
Figure 2.2 Inserting the Host Adapter Bracket Screw Press Here Press Here PCI Connectors PCI Express Edge of Connector x16 Motherboard PCI Express Connector x4 Step 3. Make sure the edge connector is properly aligned before pressing the adapter into place. The bracket should fit into the empty space where the blank bracket panel was removed. Step 4. Be sure to tighten the bracket screw into the bracket securely before you connect the internal and external SCSI devices. 2-4 Detailed Host Adapter I
Summary of the content on the page No. 19
2.2 SCSI Device Cables For reliable Ultra320 operation, be sure to use an Ultra320-rated SCSI device cable. The internal Ultra320 SCSI device cable also has built-in low voltage differential (LVD) and single-ended termination. This built-in feature is included because most LVD SCSI hard disk drives are not made with on-board low voltage differential termination. 2.2.1 Internal SCSI Cables You can connect all internal SCSI devices to the host adapter with an unshielded, twisted pair, 68-pin ribbo
Summary of the content on the page No. 20
Figure 2.5 SCSI Cable – 68-Pin VHDCI to 68-Pin VHDCI Figure 2.6 SCSI Cable – 68-Pin VHDCI to 68-Pin HD . Figure 2.7 SCSI Cable – 68-Pin HD to 68-Pin HD 2-6 Detailed Host Adapter Installation Version 2.2 Copyright © 2002–2004 by LSI Logic Corporation. All rights reserved.
