Summary of the content on the page No. 1
P-2602HWNLI
802.11g Wireless ADSL2+ 4-port VoIP IAD
Quick Start Guide
Version 3.40
5/2006
Edition 1
Summary of the content on the page No. 2
P-2602HWNLI Quick Start Guide Overview Your P-2602HWNLI Integrated Access Device allows you to make phone calls over the Internet (Voice over Internet, or VoIP) as well as regular analog (PSTN) or digital (ISDN) phone calls. It also provides Internet access for your network. The P-2602HWNLI also allows wired and wireless clients to safely access the Internet. It can connect up to four Ethernet devices, and includes wireless networking capability. The following figure shows your P-2602HWNLI,
Summary of the content on the page No. 3
P-2602HWNLI Quick Start Guide 1 Connect Your P-2602HWNLI 1DSL: Use the gray ADSL cable to connect the DSL port to a telephone jack or the DSL (or MODEM) jack on a splitter. 2 Do one of the following to connect one or more telephones to the P-2602HWNLI. These are also known as Foreign eXchange Station (FXS) connections. PHONE: Use telephone wire (and any included telephone adaptors) to connect analog telephones to these ports. Use the PHONE 1 port first. 3
Summary of the content on the page No. 4
P-2602HWNLI Quick Start Guide Note: When the P-2602HWNLI does not have power, only the phone connected to the PHONE 1 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency you can make outgoing calls. ISDN PHONE: Use telephone wire to connect one or more ISDN telephones or an ISDN PBX to this port. 3 PSTN/ISDN: You can connect either a PSTN or an ISDN line to this port. This is a Foreign eXchange Office (FXO) port. Use the included green PSTN c
Summary of the content on the page No. 5
P-2602HWNLI Quick Start Guide 2 Initial Configuration Open your web browser, and go to http://www.zyxel.com. Your P-2602HWNLI tries to detect your Internet connection. This takes about two minutes. If any other screens appear, follow the directions in the screen. If http://www.zyxel.com opens correctly, your Internet access is ready. If the web page does not open, use the following steps. You should have information provided by your ISP. 1 Enter 192.168.1.1 as the web site address 2 Click Logi
Summary of the content on the page No. 6
P-2602HWNLI Quick Start Guide 4 Select Go to Wizard setup and click Apply. 5 Click INTERNET/WIRELESS SETUP to configure your Internet access and/or wireless settings. Follow the directions in the screens and enter your Internet access information exactly as it was given to you. 6 Click VOICE OVER INTERNET SETUP to configure your VoIP account settings. See Section 2.1. 6
Summary of the content on the page No. 7
P-2602HWNLI Quick Start Guide 2.1 Voice Setup Note: You should have a voice account already set up. Fill in the fields with information from your voice service provider. Leave the default settings in fields for which no information was provided (except if otherwise specified). If you have a SIP account like 1234@VoIP-provider.com,“1234” would be the SIP Number and “VoIP- provider.com” would be the SIP Service Domain. This screen configures SIP account 1. Select the check box if you ha
Summary of the content on the page No. 8
P-2602HWNLI Quick Start Guide 2.3 Make Calls Through the Internet When a PHONE light turns on, your SIP account is registered successfully. Dial a numerical SIP number (like “12345” for example) on your phone’s keypad. Use your voice service provider’s dialing plan to make calls through the Internet to regular telephone numbers. See your User’s Guide if you need to make peer-to-peer VoIP calls or calls to SIP numbers that use letters. 3 Troubleshooting If you cannot access the Internet, follo
