Summary of the content on the page No. 1
Net Fly U-108
Wireless 108Mbps USB Adapter
A02-UP-W108
MULTI-LANGUAGE
USER MANUAL
A02-UP-W108_MX01
Where solutions begin
Company certified ISO 9001:2000
Summary of the content on the page No. 2
Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or regi
Summary of the content on the page No. 3
CE in which Countries where the product may be used freely: Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: except the channel 10 through 13, law prohibits the use of other channels. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
Summary of the content on the page No. 4
Summary of the content on the page No. 5
INDEX ENGLISH 1 1. Introduction 1 1.1 IEEE 802.11g Wireless 108Mbps USB Adapter 1 1.2 Product Features 1 1.3 How the Adapter works 2 1.4 System Requirements 3 1.5 Package Contents 3 1.6 Product View/ LED Indicators 4 2. Connecting the USB Extension Cable 5 2.1 Hardware Installation 6 3. Software Installation 7 3.1 Utility Installation 7 3.2 Installing on Windows XP/2000 8 4. Wireless Network Utility 9 4.1 Introduction 9 4.2 Disable “Windows XP Wireless Zero Configuration 9
Summary of the content on the page No. 6
1.2 Caratteristiche del Prodotto 23 1.3 Come funziona una scheda di rete Wireless 24 1.4 Requisiti di sistema 26 1.5 Contenuto della confezione 26 1.6 Descrizione del prodotto 26 2. Installazione Hardware 27 2.1 Verifica Installazione 28 3. Installazione delle Utilità/Driver 28 3.1 Installazione su sistemi Windows 2000 e XP 29 4. Utility di configurazione della connessione Wireless 31 4.1 Introduzione 31 4.2 Disabilitare il gestore delle connessioni Wireless di Windows XP 31 4.3 Ut
Summary of the content on the page No. 7
1.3 Modes de fonctionnement 57 1.4 Besoins système 60 1.5 Contenu de l’emballage 60 2. Connexion USB 61 2.1 Installation matérielle 62 3. Installation logicielle 63 3.1 Installation sous Windows 2000 et XP 63 4. Outil de configuration de la connexion Sans-Fil 64 4.1 Introduction 64 4.2 Désactivation du contrôleur de connexion Sans-Fil de Windows XP 64 4.3 Utilitaire de configuration 65 4.3.1 Menu "Link Info" 66 4.3.2 Menu "Configuration" 68 4.3.3 Menu "Advanced" 70 4.3.4 Menu "Si
Summary of the content on the page No. 8
ENGLISH ENGLISH 1. Introduction Thank you for purchasing the IEEE 802.11g Wireless 108Mbps USB Adapter that provides the easiest way to wireless networking. This User Manual contains detailed instructions in the operation of this product. Please keep this manual for future reference. 1.1 IEEE 802.11g Wireless 108Mbps USB Adapter IEEE 802.11g Wireless 108Mbps USB Adapter (hereafter called the Adapter) is a high-efficiency wireless LAN adapter for wireless networking at home, in office
Summary of the content on the page No. 9
ENGLISH 1.3 How the Adapter works Ad-hoc Mode: An Ad-hoc network is a local area network or other small network, especially one with wireless or temporary plug-in connections, in which some of the network devices are part of the network only for the duration of a communications session. Users in the network can share files, print to a shared printer, and access the Internet with a shared modem. In this kind of network, new devices can be quickly added; however, users can only communicat
Summary of the content on the page No. 10
ENGLISH 1.4 System Requirements Before installing the Adapter, your PC should meet the following: PC with available USB V2.0/1.1* slot Intel® Pentium®III 600Mhz or compatible processor with 128MB RAM Windows 2000/XP operating system Minimum 15 Mbytes free disk space for installing the driver and utilities CD-Rom drive *When plug the device in the USB 1.1/1.0 port, the real throughput will be up to 6Mbps only when running 11Mbps or higher speed 1.5 Package Contents Unpack the
Summary of the content on the page No. 11
ENGLISH 1.6 Product View/ LED Indicators Wireless 108Mbps USB Adapter 4
Summary of the content on the page No. 12
ENGLISH 2. Connecting the USB Extension Cable The USB extension cable that comes with the Adapter has Type A connectors on both ends. One is a male Type A connector that plugs into the PC’s USB port, and the other is a female Type A connector that plugs into the Adapter. This USB extension cable have a special function, it can be twist to any direction to have the best connection in the air. It is recommended that the Pen Size Wireless 108Mbps USB Adapter was vertically plane with the g
Summary of the content on the page No. 13
ENGLISH 2.1 Hardware Installation LED Indicator The Power LED will be ON when the unit is powered up. The Link LED will be blinking indicates a WLAN connection. Check the installation The LEDs of the Wireless USB 2.0 Adapter are clearly visible and the status of the network link can be seen instantly: When connected to the USB port and the driver was installed, the LNK LINKwill start blinking, it means that the device is starting to scanning a 802.11g wireless device near the
Summary of the content on the page No. 14
ENGLISH 3. Software Installation This section describes the procedures of installing the driver and utility. Follow the instruction step by step to finish the installation. 3.1 Utility Installation This section describes the procedures of installing the driver and utility. Before insert USB Dongle into the PC USB of your computer, please install the Utility Program first. Make sure that the 108Mbps Wireless Network USB Dongle is NOT inserted into the USB slot. Go to your Windows
Summary of the content on the page No. 15
ENGLISH 3.2 Installing on Windows XP/2000 After the opening banner, Windows will tell you that the new device has been detected. Click “Next >”. Select “Install the software automatically(recommended)” then click “Next>”. In next window, click “Continue Anyway” then click “Finish”. After installing the driver of USB, there will be another pop-up window to guide you to keep installing the driver of USB Dongle. Click “Next >”. Select “Install the software automatically(recommended)” t
Summary of the content on the page No. 16
ENGLISH 4. Wireless Network Utility 4.1 Introduction After installing the driver, the Adapter provides a convenient and powerful utility that allows you to set up, configure, and know your networking status easily and clearly. To launch the utility, just double click the icon. You will see the icon on the Windows task bar when you finish the installation. When the icon in the toolbar represents in green color ( ), it is properly connected to the network and if it represents in white
Summary of the content on the page No. 17
ENGLISH 4.3 Using the Configuration Utility Double-click the Wireless LAN icon to launch the Configuration Utility. With the Wireless 108Mbps USB Adapter utility, users can configure all the functions provided by the Wireless Monitor Utility. Double-click the utility icon that appears in the taskbar. The Wireless Monitor Utility includes five tabs: Link Info, Configuration, Advanced, Site Survey and About. Wireless 108Mbps USB Adapter
Summary of the content on the page No. 18
ENGLISH 4.3.1 Link Info The Link Info screen shows you the status of the USB Adapter, it shows that where the device is connected to, the Network mode, the Channel, the transmit rate and the encryption mode. There is another dialog box showing the data transmitted and data received. The two signal lines show the Signal Strength and the Link Quality of the device. Status: Shows the SSID associated, which can be used to identify the wireless network. SSID: Shows current SSID, which
Summary of the content on the page No. 19
ENGLISH Signal Strength: Shows the wireless signal strength of the connection between the 108Mbps Wireless Network USB Dongle with the Access Point. Data Rate: Shows the statistics of data transfer, and the calculation is based on the number of packets transmitted and received. The range of radio frequencies used by IEEE 802.11g wireless devices is called a “channel”. Channels available depend on your geographical area. You may have a choice of channels (for your region) so you should
Summary of the content on the page No. 20
ENGLISH 4.3.2 Configuration This is the page where you can change the basic settings of the Access Point with the minimum amount of effort to implement a secure wireless network environment. SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a wireless network. The SSID must be identical for each clients and nodes in the wireless network. Wireless Mode: There are two types available for selection • Infrastructure – to establish wireless commun
