Polycom INTERMEC WA22 user manual

Summary of the content on the page No. 1

Field Verified
Configuration Guide
Intermec
MobileLAN Access Points
2100, 2101, 2102, WA21, WA22
January 2008 Edition
1725-36053-001
Version G

Summary of the content on the page No. 2

Field Verified Configuration Guide Trademark Information Notice Polycom® and the logo designs Polycom, Inc. has prepared this document for use by SpectraLink® Polycom personnel and customers. The drawings and LinkPlus specifications contained herein are the property of Link Polycom and shall be neither reproduced in whole or NetLink in part without the prior written approval of Polycom, SVP nor be implied to grant any license to make, use, or sell equipment manufactured in acco

Summary of the content on the page No. 3

Intermec: MobileLAN Access Points 2100, 2101, 2102, WA21, WA22 Introduction This document details the specifications for configuring the Intermec 2100, 2101, 2102, WA21 and WA22 Access Points (APs) with SpectraLink 8000 Wireless Telephones. Product Summary Manufacturer: Intermec Approved product(s): 2100, 2101, 2102, WA21, WA22 RF technology: Direct-sequence spread spectrum (DS), 2.4 GHz † AP software version: 1.91 SpectraLink handset models: e340/h340/i640 8020/8030 SpectraLink rad

Summary of the content on the page No. 4

Field Verified Configuration Guide Access Point Capacity and Positioning Each site is unique in its AP requirements. Please take the following points into account when determining how many APs are needed and where they should be placed in the facility. Handset range There must be wireless LAN coverage wherever SpectraLink 8000 Wireless Telephones will be used. The typical range for a SpectraLink 8000 Wireless Telephone is comparable to that of a laptop computer utilizing a wireless LAN

Summary of the content on the page No. 5

Intermec: MobileLAN Access Points 2100, 2101, 2102, WA21, WA22 monitored/analyzed using a network sniffer or a simple network management protocol (SNMP) workstation. Number of other wireless devices per AP The SpectraLink 8000 Wireless Telephones share bandwidth with other wireless devices. To ensure adequate RF bandwidth availability, consider the number of wireless data devices in use per AP. Notes on Configuration The AP must support SpectraLink Voice Priority (SVP). Contact your AP

Summary of the content on the page No. 6

Field Verified Configuration Guide Access Point Configuration The following AP configuration steps need to be repeated for each AP radio that you are planning to use with VoIP. 1. Connect to the AP using the Web browser interface. Consult the access point documentation for details. 2. Go to IEEE 802.11B Radio and set the SSID (Network Name) on the AP the same as the setting for the SpectraLink 8000 Wireless Telephones. 3. Go to IEEE 802.11B Radio: Advanced Configuration and set Data/Vo