HP (Hewlett-Packard) Deskjet 1280 user manual

Summary of the content on the page No. 1

CISS for HP Deskjet 1280

Thanks for your purchasing our continuous ink system for HP Deskjet 1280. Our continuous ink system is
the idea set for inkjet printer which can low down the printing cost. Before your using of CISS, pls kindly
read the instruction with details. In this way, you can install this system without troubles then.


1.General Guide

1)components
A. CIS system 1 set B. Air filter 4pcs C. support arm 2 sets
D.Refill kit 4pcs E. Instruction C

Summary of the content on the page No. 2

Open the cover of the ink vehicle Put in the cartridges of CISS Cover the lid and make sure the Put out the original cartridges cartridges are in the right position 3. Installation of the support arm We have installed the support Put another short support arm in the Put the long support arm 3.5cm right to arm in the cartridges middle of groove the short one and 10cm down.

Summary of the content on the page No. 3

4. printing testing Switch on the power press the power key During printing, pls keep the Cover of the printer open, just insert the paper to the hole as picture shows. Then no need to close the cover. Cleaning the cartridges and checking the printing quality. If the printing is uncontinuous, maybe for there is little air in the nozzle. And after several times of cleaning, there is still

Summary of the content on the page No. 4

5.Decode the cartridges When the printer says that you need to change the cartridges, you need to decode the cartridges. Just press the button 6 (restore key) till the light does not flash, then it is decoded. 6. Refill ink Please pay attention to the ink level in the reservoir, if the ink level is below 1cm as the picture show,[lease use the refill kits to fill ink into reservoir bottle. Carefully pull out the rubber plugs from the ink hole. After fi