AllerAir 5000 user manual

Summary of the content on the page No. 1

The 4000 - 5000 - 6000 - 8000 Series - Air Purifier
Congratulations, you are moments away from fresher, cleaner indoor air. Your new
AllerAir unit will combat many of the chemicals, gases, odors and particles
responsible for poor indoor air quality, and in turn, health concerns such as
allergies, asthma, sick building syndrome and multiple chemical sensitivity. As with
any air cleaner, proper maintenance of your unit is a vital part of keeping it
operating at peak efficiency.
Operation:
Y

Summary of the content on the page No. 2

REFILING THE CARBON CANISTER WITH NEW BULK CARBON TO REMOVE THE CARBON CANISTER STEP 7 STEP 8 STEP 9 Pull back pre-filter Remove carbon filter lid. Pour out old bulk slightly, remove screws carbon until totally from top of filter. STEP 1 STEP 2 STEP 3 empty. Turn power off and Remove all four screws Gently grasp wheels. Unplug the unit. with a screwdriver. Lay unit up-side down. STEP 5 First remove the Carbon filter by placing thumbs on the inner side of the filter. Then pull up gently STEP

Summary of the content on the page No. 3

TO REPLACE UV BULB AND BALLAST TO REPLACE THE HEPA FILTER 7A Step 7- 10 W Lamp Step 1 Turn power off Lay unit up-side down. Step 2 4 pin socket With screw driver STEP 2 STEP 1 STEP 3 remove 4 screws. Remove all four screws Turn power off and Gently grasp wheels. 7B Unplug the unit. with a screwdriver. Lay unit up-side down. Step 3 A. Unplug the 4 pin socket from the UV light bulb. Gently grasp wheels. Wing Nut B. Loosen the wing nut that holds the UV light bulb in place an

Summary of the content on the page No. 4

ALLERAIR'S AIR PURIFICATION SYSTEM TO BEGIN USING THE AIR PURIFIER LASER TESTED TRUE HEPA Wipe the unit with a damp cloth. HEPA (Hight Efficiency Particulate Arrestance) filters were develped for the Atomic Plug the unit into a grounded 110 outlet. Energy Commission to remove radio active dust from their laboratories. The are now the primary filtration systems for electonic clean room assembly, hospital surgeries, bio Turn the unit on at TURBO and let it run for a moment. engineering, pharma