AllerAir 600 Series user manual

Summary of the content on the page No. 1

FILTER ASSEMBLY- 600 D, DX
Step 1 Step 3
Step 2
Turn Power Off and Gently grasp wheels.
With a #2 Philips screw driver,
unplug receptacle.
remove the four screws from the Remove base by gently pulling on
Lay unit upside down. bottom of the unit. the wheels.
Step 4 Step 5
Step 6
Remove only one of the white, felt, Insert the carbon filter (either a
donut-shaped gaskets from the Model 600 D Carbon or a Model 600 Replace the gasket that had been
inside of the purifier body. DX Carbon) into the

Summary of the content on the page No. 2

AllerAir Industries Inc. 600 Series REPLACING FILTER ASSEMBLY- 600 Series Congratulations, you are moments away from fresher, cleaner indoor air. Your new AllerAir unit will combat many of the chemicals, gases, odors and particles responsible for poor indoor air quality, and in turn, health concerns such as allergies, asthma, sick building syndrome and multiple chemical sensitivity. As with any air cleaner, proper maintenance of your unit is a vital part of keeping it operating at peak effi