Summary of the content on the page No. 1
PRIMERGY
PRIMERGY N800
Server System
Xenia Fierley
Fujitsu SiemensComputers GmbH Primergy
81730 München
e-mail: email:manuals@fujitsu-siemens.com
Tel.: (089) 61001-157
Fax: 0 700 / 372 00000
U41244-J-Z156-1-76
Sprachen: En
Edition July 2001
Summary of the content on the page No. 2
Comments… Suggestions… Corrections… The User Documentation Department would like to know your opinion on this manual. Your feedback helps us to optimize our documentation to suit your individual needs. Fax forms for sending us your comments are included at the back of the manual. There you will also find the addresses of the relevant User Documentation Department Copyright and Trademarks Copyright © 2001 Fujitsu Siemens Computers GmbH. All rights reserved. Delivery subject to availability; r
Summary of the content on the page No. 3
Introduction Important notes Installing the server Preparation for use and operation Configuration software and utilities Property and data protection Troubleshooting and tips System expansions SCSI configurations Reference section and index
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 Summary of contents . . . . . . . . . . . . . . . . . . . . . . . 6 1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
Contents 4.4 Configuring the server and components . . . . . . . . . . . . . 38 4.4.1 Changing the switch settings . . . . . . . . . . . . . . . . . . . 39 4.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . . 43 5 Configuration software and utilities . . . . . . . . . . . . . . 45 5.1 Short cuts using a key combinations . . . . . . . . . . . . . . . 45 5.2 Power-ON Self-Test (POST) . . . . .
Summary of the content on the page No. 7
Contents 7.5 No screen display or display drifts . . . . . . . . . . . . . . . . 77 7.6 No mouse pointer displayed on the screen . . . . . . . . . . . 77 7.7 Floppy disk cannot be read/written . . . . . . . . . . . . . . . 78 7.8 Time and date are not correct . . . . . . . . . . . . . . . . . . 78 7.9 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 78 7.10 Drives are reported as “dead” . . .
Summary of the content on the page No. 8
Summary of the content on the page No. 9
1 Introduction The PRIMERGY N800 system server is an enterprise server with 8-way processing power and offers highest performance by using the Intel profusion technology. It is easy to integrate and can easily satisfy the needs of a variety of high-performance applications such as, for example, use as a network server, multiuser server system or large database. PRIMERGY N800 server systems offer a high level of data security and avail- ability through highly developed hardware and software c
Summary of the content on the page No. 10
Features Introduction 1.1Features Processors and Memory The server can accommodate up to eight Intel Pentium III Xeon™processors with a clock frequency of 700 MHz or 900 MHz. 1 MB and 2 MB second level cache are available. The 700 MHz or 900 MHz processors are mounted on „Palmetto mezzanine“ carrier boards. V CAUTION! In order to prevent a damage of the processors, pay attention that the processors are mounted on the corresponding carrier boards only. Up to 32 GB Ram memory with ECC SDRAM te
Summary of the content on the page No. 11
Introduction Features Power supply The server is equipped with three power supplies. This ensures a power supply redundancy. If a defect occurs in one unit, the other units ensures unimpaired further operation. The defective power supply unit can be replaced during operation (hot-plug power supply). Cooling The server contains two independent cooling subsystems: – The upper system for cooling the system board, the I/O board and the upper part of the control panel. – The lower system for cool
Summary of the content on the page No. 12
Features Introduction Server management Server management is implemented with the aid of the supplied ServerView software and PDA (Prefailure Detection and Analyzing) technology from Siemens. The PDA analyzes and monitors all components relevant to system reliability, thus enabling early detection of overload situations and appropriate counter-measures. ServerView enables the management of all PRIMERGY servers in the network via a central console. Here ServerView supports the following func
Summary of the content on the page No. 13
Introduction Target group Service and Support The PRIMERGY N800 is service-friendly and modular (compute node housing), thus enabling quick and simple maintenance. With the optional Remote Test and Diagnosis System RemoteView, long-distance maintenance and service (remote) can also be performed. Other features ● year 2000 support ● 3 years guarantee for the system unit ● 5 years spare parts supply ● take-back guarantee of old systems 1.2 Target group This manual is intended for those responsi
Summary of the content on the page No. 14
Summary of contents Introduction 1.3 Summary of contents This manual describes the PRIMERGY N800, its installation and configuration, and how to install extensions/upgrades. Further information is provided: – in the “Safety, Warranty and Ergonomics” manual – in the manual for the 19-inch rack – in the manual for the monitor – in the manual for ServerView server management – in the manual for the remote test and diagnosis system RemoteView – in the documentation for your operating system – in th
Summary of the content on the page No. 15
Introduction Notational conventions ● System expansions This chapter describes in more detail how you can expand your system using various components. It also explains how to replace defective compo- nents. ● SCSI configurations This chapter explains the SCSI-IDs for the hard disk drives and internal SCSI configurations. 1.4 Notational conventions italic type Identifies commands, menu items, names of buttons, options, variables, file names, path names and input within the body of the text. f
Summary of the content on the page No. 16
User-friendly documentation – verified quality Introduction 1.5 User-friendly documentation – verified quality As part of its efforts to further improve the information provided for users, the editorial department responsible for this manual has been independently audited to verify its high standards of quality of the documentation. This audit was carried out by TÜV PRODUCT SERVICE GmbH. The following aspects were investigated: – General comprehensibility – User-friendliness – Occupational h
Summary of the content on the page No. 17
Introduction Technical data 1.6 Technical data Electrical data Rated voltage range 100 V - 120 V 200 V - 240 V (auto sense) Rated voltage tolerance +6 % / -10 % Frequency 50 Hz / 60 Hz Rated current at 100V - 120 V 12 A Rated current at 200V - 240 V 7 A Effective power 1247 W Apparent power 1271 VA Heat emission 4014 kJh Building fuse 16 A Protection class I Dimensions and weight Height (mm) 312 (seven height units) Width (mm) 445 Depth (mm) 712 Weight (kg) max. 60 (maximum configuration) Envi
Summary of the content on the page No. 18
Technical data Introduction Standards Product safety and ergonomics IEC 60950 (DIN EN 60950), UL 1950, CSA 950, NEMKO Electromagnetic compatibility Interference emission EN 55022, Class A; FCC part 15, Class A Interference immunity EN 50082-1 CE certification Low voltage directive LVD 73/23/EEC EMC Directive 89/336/EEC Certification GS, CSA NRTL/C, CB Certificate Noise level (ISO 9296) Operation Idle Sound power level (L ) max. 5,5 B max. 4,8 B WAd Operating sound max. 43 dB(A) max. 32 dB(A) pr
Summary of the content on the page No. 19
2 Important notes 2.1 Notes on safety In this section you will find information that you must note when using the storage subsystem. This device complies with the relevant safety standards for IT equipment, including electronic office machines, intended for use in the office environment. I Observe the safety instructions in the “Safety, Warranty and Ergonomics” manual and in the documentation for the connected PRIMERGY system. If you have any questions relating to setting up and operating you
Summary of the content on the page No. 20
Notes on safety Important notes V CAUTION! ● The device must only be connected to a properly grounded wall outlet (the device is fitted with a tested and approved power cable). ● Make sure that the wall outlet of the building‘s wiring system is freely accessible. ● Switching off the device does not cut off the supply of power. To do this you must remove the power plugs. ● Before opening the unit, switch off the device and then pull out the power plugs. ● Route the cables in such a way that
