Summary of the content on the page No. 1
Operating Instructions
Digital Cordless Phone
Model No. KX-TCD440E
Digital Cordless Answering System
Model No. KX-TCD445E
This unit is Caller ID compatible. To display the caller’s phone
number, you must subscribe to Caller ID service.
Charge the batteries for about 7 hours before initial use.
Please read these Operating Instructions before using the unit and save them for
future reference.
Summary of the content on the page No. 2
Table of Contents Preparation Useful Information Accessory information . . . . . . . . . . . . . . .3 Troubleshooting . . . . . . . . . . . . . . . . . . . 34 Important information . . . . . . . . . . . . . . . .4 Technical information. . . . . . . . . . . . . . . 36 Location of controls . . . . . . . . . . . . . . . . .5 Conditions of guarantee. . . . . . . . . . . . . 37 Connections . . . . . . . . . . . . . . . . . . . . . . .6 Battery installation . . . . . . . . . . . . . . . . . .6 Index B
Summary of the content on the page No. 3
Preparation Preparation Accessory information Thank you for purchasing a new Panasonic digital cordless phone. Sales and Support Information Customer Care Centre L For UK customers: 08700 100 076 L For Republic of Ireland customers: 01289 8333 L Visit our website for product information: www.panasonic.co.uk L E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic UK L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Mon
Summary of the content on the page No. 4
Preparation Location Important information For maximum distance and noise-free operation, place your base unit: General Away from electrical appliances such as TVs, radios, personal computers or other L Use only the power supply included with phones. this product, noted on page 3. In a convenient, high and central location. L Do not connect the AC adaptor to any AC outlet other than a standard 220–240 V Battery caution AC outlet. L We recommend using the batteries, noted L This product
Summary of the content on the page No. 5
Preparation I Receiver J Display Location of controls K {R} (Redial/Pause) L {j} (Menu/OK) Handset M {ih} (Off/Power) N {C/T} (Clear/Mute) I O {INT} (Intercom) P Microphone A J Display descriptions K L Icons Meaning B M w Within range of base unit C N Out of range, no registration D 0w4 or no power on base unit E Paging, intercom mode or x accessing base unit F O k Making or answering a call G C Phonebook mode G l Setting mode P H 7 Battery strength is low A Speaker 5 Battery strength is high
Summary of the content on the page No. 6
LINE LINE Preparation Base unit Battery installation A 1 Insert the batteries negative ( ) terminal first. B A Charge contacts B {x} (Page) Connections 2 Close the battery cover. Hooks To telephone network (220–240 V, Note: 50 Hz) L Use only rechargeable batteries (page 3). Note: L If the AC outlet is connected to a switch, make sure the switch is on. L If the handset is not charged, you cannot make or answer calls. L Never install telephone wiring during a lightning storm. L The AC adap
Summary of the content on the page No. 7
Preparation Battery life Battery charge After your Panasonic batteries are fully charged, you can expect the following Place the handset on the base unit for performance: about 7 hours before initial use. Ni-MH batteries (typical 700 mAh) Operation Operating time While in use (talking) 10 hours max. While not in use 200 hours max. (standby) Ni-Cd batteries (typical 250 mAh) Operation Operating time While in use (talking) 4 hours max. Note: While not in use 60 hours max. L Clean the charge con
Summary of the content on the page No. 8
Preparation Battery replacement Turning the power on/off If 074 flashes even when the handset Power on batteries have been fully charged, both Press {ih} for about 1 second. batteries must be replaced. L The display will change to the standby Important: mode. L Please use only the Panasonic batteries, noted on page 3. Power off L Use only rechargeable batteries. If you install non-rechargeable batteries and Press {ih} for about 2 seconds. start charging, the batteries may leak L The displ
Summary of the content on the page No. 9
Preparation Setting the time and date Wall mounting 8 cm Important: L Confirm that the AC adaptor is connected. L Ensure that w is not flashing. 1 Press{j}. Screws Hooks Hook 2 Press{v} repeatedly to display “SETTING BS”, then press {>}. 3 Press{*}. 4 Enter the current hour and minute by selecting 2 digits for each (24-hour time entry). Note: Example: 15:15 L Make sure the screws are securely Press{1}{5}{1}{5}. fastened to the wall. L If you make a mistake, press {C/T}. L Use the following w
Summary of the content on the page No. 10
Telephone Telephone flash and mute is automatically turned on. Note: Making calls L Automatic redial is cancelled when the 1 Lift the handset and dial the phone navigator or any button is pressed. number. L If mute does not turn off after the line is L To correct a digit, press {C/T}, then connected, press {C/T}. enter the correct number. To make a call using the redial list 2 Press{C}. The last 10 phone numbers dialled are 3 When finished talking, press {ih} or stored in the redial list. p
Summary of the content on the page No. 11
Telephone 4 Press{v} repeatedly to display “YES”, Note: then press {>}. L Emergency calls cannot be made until key L To erase other numbers, repeat from lock is turned off. step 2. L Key lock is turned off when the handset is turned off. 5 Press{ih}. R button (to use the recall feature) To store a number from the redial list into the phonebook {R} is used to access optional telephone services. Contact your service provider for 1 Press{R}. details. 2 Press{v} repeatedly to select the If you
Summary of the content on the page No. 12
Telephone 1 Press{j} during a conversation. 2 Press{#}. Answering calls L “RECORDING” is displayed and 1 Lift the handset and press {C} or {s} recording starts. when the unit rings. L A beep sounds every 15 seconds and L You can also answer a call by pressing can be heard by the other party, but is any dial key from {0} to {9},{*},{#}, not recorded. or {INT}. (Any key talk feature) 3 To stop recording, press {j}, then press 2 When finished talking, press {ih} or {#}. place the handset on t
Summary of the content on the page No. 13
Telephone L If there is no space to store new entries, “MEMORY FULL” will be displayed. Erase Phonebook unnecessary entries. Storing phone numbers and To edit/correct a mistake names 1 Press {<} or {>} to move the cursor to the right of where you want to correct the Up to 20 phone numbers can be stored in number/character. the phonebook for quick access. 2 Press {C/T} to erase a digit, then enter 1 Press{j} 2 times. the correct number/character. 2 Enter a phone number (24 digits max.). L E
Summary of the content on the page No. 14
Telephone 2 Press {>}. Making calls using the 3 Press {v} repeatedly to display “YES”, phonebook then press {>}. Before using this feature, store the desired 4 Press {ih}. phone numbers and names into the Note: phonebook (page 13). L The number erased from a hot key will not 1 Press{k}. be erased from the phonebook. To erase from the phonebook, see page 13. 2 Press{e} or {v} repeatedly to display the desired entry. Making calls using a hot key 3 Press{C} or {s}. 1 Press and hold the desired
Summary of the content on the page No. 15
Telephone this service. When you hear a call waiting tone during a conversation, the display will Caller ID service show the second caller’s information. You can answer the second call, keeping the first Important: call on hold. Please consult your service L This unit is Caller ID compatible. To provider for details of this service. display the caller’s phone number, you must subscribe to Caller ID service. After Viewing caller information and subscribing to Caller ID service, this unit
Summary of the content on the page No. 16
Telephone the right of where you want to edit the number. 4 Edit the phone number. L To erase a digit, press {C/T}. 5 Press{C} or {s}. Note: L The edited phone number will not be saved. Erasing caller information 1 Press{e} or {v} repeatedly to display the desired entry, then press {>}. 2 Press{v} repeatedly to display “CLEAR”, then press {>}. L If you want to erase all caller information, select “ALL CLEAR”. 3 Press{v} repeatedly to display “YES”, then press {>}. 4 Press{ih}. Storing calle
Summary of the content on the page No. 17
Useful Telephone Settings Useful Telephone Settings Guide to handset settings For your reference, a chart of all items which can be customised for the handset is printed below. Details of each item can be found on the corresponding pages. To enter the 2nd menu, first press {>}. Press {v} repeatedly to display “SETTING HS”, then press {>}. 2nd menu 3rd menu Default setting Page “TIME ALARM”“SET TIME” page 18 “SET ALARM”“OFF” page 18 “RINGER OPT” “RINGER VOL” Level 6 page 18 (Ringer options) (R
Summary of the content on the page No. 18
Useful Telephone Settings ALARM”, then press {>}. Handset settings 4 Press {v} repeatedly to display “SET ALARM”, then press {>}. 5 Press {v} repeatedly to select the Time alarm desired setting, then press {>}. An alarm will sound for 3 minutes at the set 6 Press {ih}. time once or daily. “ONCE”: The alarm will ring only once. Ringer options “REPEAT DAILY”: The alarm will ring at the set time everyday. Ringer volume “OFF”: Turns this feature off. Set the time and date beforehand (page 9). 7
Summary of the content on the page No. 19
Useful Telephone Settings desired item, then press {>}. displayed. Set the time and date beforehand (page 9). 5 Press{v} repeatedly to select the “OFF”: Turns this feature off. desired setting from “RING TYPE 1” to “BS NO”: The base unit number will be “RING TYPE 20”, then press {>}. displayed. 6 Press{ih}. “HS NO”: The handset number will be Note: displayed. L If you select one of the melody ringer 1 Press {j}. types, the ringer will continue to sound for 2 Press {v} repeatedly to displa
Summary of the content on the page No. 20
Useful Telephone Settings 4 Press{v} repeatedly to display “TALK “OFF”, then press {>}. MODE”, then press {>}. 7 Press {ih}. 5 Press{v} repeatedly to select the Note: desired setting, then press {>}. L While this feature is turned on, the 6 Press{ih}. following will be displayed. Selecting the display language 10 display languages are available. Storing the direct call number 1 Press{j}. Direct call allows you to dial a preset phone 2 Press{v} repeatedly to display number simply by pressing
