Summary of the content on the page No. 1
Cover
Important
Please read PRECAUTIONS, this User’s Manual and Setup Guide
(separate volume) carefully to familiarize yourself with safe and effective usage.
• Please read the Setup Guide (separate volume)
• The latest User’s Manual is available for download from our site:
http://www.eizo.com
Summary of the content on the page No. 2
[Location of the Caution Statements] Ex. SX2462W This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. http://www.eizo.com Product specification may vary with sales areas. Confirm the specification in the manual written in language of the region of purchase. Copyright© 2009 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval sy
Summary of the content on the page No. 3
Notice for this monitor Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by wa
Summary of the content on the page No. 4
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. LCD Panel ● • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a dry cloth for better finishing. Cabinet
Summary of the content on the page No. 5
CONTENTS - . Setting the EIZO Logo Display [Logo] ........ 6 Cover ............................................................. 1 - . Setting Orientation [Orientation] ................ 6 Notice for this monitor ............................................. To set the orientation of the Adjustment menu . 26 ● CONTENTS ............................................................. - . Setting Language [Language] ..................... 7 Chapter 1 Introduction ..................
Summary of the content on the page No. 6
Chapter 1 Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • 22” wide format LCD (SX2262W) / 24” wide format LCD (SX2462W) • Resolution 1920 dots x 1200 lines • Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals) • 3 signal input terminals (DVI-I x 2, DisplayPort x 1) • FineContrast function for selecting an optimal display mode “2-3. To select the display mode (FineContrast)” (page 18) • The software “ScreenManager Pro for
Summary of the content on the page No. 7
1- . Controls and Functions Ex. SX2462W 16 17 19 18 20 Adjustment menu 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 Sensor Detects ambient brightness. Auto EcoView function. (page 30) Switches input signals for display when more than two PCs are connected to the button monitor. (page 35) Allows you to switch the FineContrast mode. (page 18) button Information regarding monitor power saving (page 38) button Adjusts the brightness.(page 20) button 6 Cancels the adjustment/setting or exit t
Summary of the content on the page No. 8
1- . Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. Disk contents and software overview ● The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme. txt” file on the disk for software startup procedures or file access procedures. Item Overview OS A “Readme.txt” file Screen adjustment pattern Used when adjusting the image of the analog
Summary of the content on the page No. 9
1- . Basic Operation and Functions Basic operation of Adjustment menu 1 Displaying Adjustment Menu Press . The adjustment menu appears. Menu title Current mode Item Settings Menu 2 Adjusting/Setting 1. Choose a menu to adjust/set with , and press . 2. Choose an item to adjust/set with , and press . 3. Adjust/set the selected item with , and press . 3 Exiting Press a few times. The adjustment menu finishes. Chapter 1 Introduction 9
Summary of the content on the page No. 10
Showing Button Guide Press the front buttons (except button), the button guide appears above the button. (When using the monitor with "Portrait" position, the button guide appears next to the button.) NOTE • The button guide will continue to appear while the Adjustment menu or Mode menu is showing. • The button guide is displayed differently depending on the selected menu or status. Chapter 1 Introduction 10
Summary of the content on the page No. 11
Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Item Adjusting/Setting “2-3. Color Adjustment” (page 18) Color Brightness Contrast Temperature Gamma Hue Advanced Settings Saturation Contrast Enhancer Outline Enhancer Gain 6 Colors “3-9. Restoring the Default Setting” Color Reset (page 28) “2-4. Displaying Lower Resolutions” Screen Screen Size (page 24) “2-2. Displaying Screen Correctly” Auto Adjustment Analog Adjustment (page 14)
Summary of the content on the page No. 12
Chapter Adjusting Screen -1. Setting Screen Resolution Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input Resolution Applicable signal Frequency Dot Clock 640 × 480 VGA 60 Hz 720 × 400 VGA TEXT 70 Hz 800 × 600 VESA 60 Hz 1024 × 768 VESA 60 Hz 170 MHz 1280 × 960 VESA 60 Hz (Max.) 1280 × 1024 VESA 60 Hz 1600 × 1200 VESA 60 Hz 1680 × 1050 VESA CVT 60 Hz * 1920 × 1200 VESA CVT RB 60 Hz Digital Input (DVI-I/DisplayPort) Resolution Applicable signal Fre
Summary of the content on the page No. 13
Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 7 ● 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the "Screen Resolution" dialog, select the monitor . 4. Click "Resolution" to select the desired resolution. 5. Click the [OK] button. 6. When a confirmation dialog is displayed, click [K
Summary of the content on the page No. 14
- . Displaying Screen Correctly Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor. When performing advanced adjustment, see “2-3. Color Adjustment” (page 18) and subsequent pages. Analog Input Attention • Wait 30 minutes or more from monitor power on before starting adjustments. (Allow the monitor to warm up for at least 30 minutes before making adjustments.) The monitor screen adjustment is used to suppress flickering of th
Summary of the content on the page No. 15
2 Prepare the display pattern for the analog display adjustment. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. NOTE • For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file. 3 Perform the auto adjustment again with the analog screen adjustment pattern displayed. T o a d j u s t fl i c k e r i n g , s c r e e n p o s i t i o n , a n d s c r e e n s i z e a u t o m a t i c a l l y [ A u t
Summary of the content on the page No. 16
4 Perform advanced adjustments for the following using the menu of the . Adjust the clock, phase and position, in this order. To eliminate vertical bars [Clock] ● Procedure 1. Choose from the menu, and press . 2. Adjust the clock with or . Press slowly so as not to miss the adjustment point. 3. Press to exit the adjustment. When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering
Summary of the content on the page No. 17
5 Adjust the color gradation. To adjust color gradation automatically [Range Adjustment] ● Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. 2. Choose from the menu, and press . The color gradation is adjusted automatically. When the auto adjustment is completed, a message appears. Select “OK” to confirm the new se
Summary of the content on the page No. 18
- . Color Adjustment To select the display mode (FineContrast) ● FineContrast allows you to select easily the adequate mode suitable for the monitor’s application. FineContrast mode Mode Purpose 1-User1 Available for the color settings according to your preference. 2-User2 3-User3 4-Text Suitable for displaying texts for word processing or spreadsheets. 5-Picture Suitable for displaying images such as photos or picture images. 6-Movie Suitable for playing back animated images. 7-sRGB Suitabl
Summary of the content on the page No. 19
NOTE • The values shown in “%” or “K” are available only as reference. • Using the “ScreenManager Pro for LCD” allows you to perform the color adjustment by using the mouse and keyboard of your PC. The adjusted status can be registered as a color data and restore the data later. (Refer to “Chapter 4 Color Adjustment” on the User’s Manual for “ScreenManager Pro for LCD”.) Adjustment items in each mode ● According to the mode selected, the adjustable function differs. (You can not select any fu
Summary of the content on the page No. 20
To adjust the brightness [Brightness] ● The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD back panel). Adjustable range: 0 to 100% Procedure 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . 3. Adjust the brightness with or . 4. Press to exit the adjustment. NOTE • You can also adjust the brightness using and . • When your feel the image is bright even if the brightness is
