Summary of the content on the page No. 1
Digiview
Wireless Thermometer
with Atomic Clock
USER MANUAL
(TE22W)
1 1
Summary of the content on the page No. 2
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Hideki Wireless Thermometer with Atomic Time. This device includes MAIN UNIT precise time keeping and temperature monitoring FEATURES features that you can use from the comfort of your home. • Wireless transmission of the temperature from the remote In this package you will find: sensor to the main unit from up to 100 feet (30 meters) away • One main unit (receiver) • Indoor and Outdoor temperature display • Precise time and date s
Summary of the content on the page No. 3
A WEATHER AND PRECISE TIME INFORMATION IN FOUR - LINE LCD DISPLAY 1st line : one-channel remote temperature with trend. 2nd line : indoor temperature with trend . I 3rd line : time of day with seconds, time of day with the day of the week, US time zone map. 4th line : calendar and alarms -weekly, single and pre-alarm. B MEM BUTTON • Toggles between current, minimum and maximum readings H of the indoor and remote temperatures. • Clears the memory. C M
Summary of the content on the page No. 4
BEFORE YOU BEGIN: REMOTE SENSOR 1 The remote sensor can be placed indoors or outdoors, the main unit must be placed indoors. FEATURES 2 We recommend using alkaline batteries for the remote • Remote temperature transmission to the main unit via sensor and main unit when temperatures are above 32°F (0°C). 433 MHz signal We recommend using AA lithium batteries for the remote • Case can be wall mounted using built-in hanger sensor when temperatures are below 32°F (0°C). • 100 feet (3
Summary of the content on the page No. 5
BATTERY INSTALLATION CHECKING REMOTE AND INDOOR TEMPERATURES REMOTE SENSOR The remote temperature information line is located on the top NOTE: Install the batteries; select temperature of the main unit’s display. unit C° or F° before mounting the remote sensor The wave icon is located above the remote channel number 1. Remove the screws from the battery compartment with a and indicates the reception status from the remote sensor. small Phillips screwdriver. There are three following types o
Summary of the content on the page No. 6
• Make sure the main unit is positioned at 8 feet (2 meters) 4. Fresh batteries are installed correctly in both remote sensor distance from any interference source such as a TV, computer and main unit. If there is no reception, please perform the following steps: monitor, microwave, etc. 1. Bring the main unit and remote sensor close together. • Within concrete wall rooms such as basements or office 2. Remove four (4) small screws from the back of the remote buildings, the received
Summary of the content on the page No. 7
MANUAL SETTINGS SETTING THE ALARM TIME ZONE To set any alarm, • Press MODE button to select time of day with day of the • Press ALARM button once to display alarm time. If the week display mode. alarm is off, OFF will be displayed. • Select the Time Zone by pressing and holding the UP ( ) • Press and hold ALARM button for two seconds. The hour button for 3 seconds. digit will flash. • Keep holding UP ( ) button until the desired time zone • Enter the hour using DOWN ( )
Summary of the content on the page No. 8
SPECIFICATIONS FCC STATEMENT Main Unit This device complies with Part 15 of the FCC Rules. Indoor Temperature Operation is subject to the following two conditions: Proposed operating range : -5.0°C to +50.0°C/ (1) This device may not cause harmful interference, and 23.0°F to 122.0°F (2) This device must accept any interference received, Temperature resolution : 0.1°C/0.2°F including interference that may cause undesired operation. User-selectable (F° or C°) temperature display War
Summary of the content on the page No. 9
DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION This product is warranted from manufacturing defects for one We year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, Name: Hideki Electronics, Inc. or unauthorized adjustment and repair. Address: 7865 SW Mohawk, Tualatin, OR 97062 Note that online product registration is required to ensure Telephone No.: 1-503-612-8395 valid warranty protection. declare that the product
