Crate Amplifiers XK15 user manual

Summary of the content on the page No. 1

XK15 Keyboard Amplifier
User’s Guide

Summary of the content on the page No. 2

XK15 Keyboard Amplifier Congratulations! You are now the proud owner of the Crate XK15 keyboard amplifier. This compact power- house offers warm clean tones and easy-to-use equalization. Each of the two input jacks has its own level control so you can mix your keyboard with another instrument or a Hi-Z vocal mic. The CD input also allows you to play along with your favorite music. The Headphone jack allows for private practicing and the external speaker jack allows you to connect the amp to anot

Summary of the content on the page No. 3

XK15 Keyboard Amplifier 1 2 3 4 5 6 7 8 9 10 11 12 13 1. INPUT 1: Use this 1/4” jack to connect 9. CD INPUT: Use these RCA jacks to con- your keyboard or other line level signal to nect the output from a CD player or tape the amplifier by means of a shielded instru- deck to the amplifier. The signal at these ment cable. The signal level at this jack is jacks is combined into a mono signal which controlled by the Level 1 knob (#3). is sent to the internal power amp circuit. Use the CD or tape pla

Summary of the content on the page No. 4

XK15 Keyboard Amplifier XK15 TECHNICAL SPECIFICATIONS: Maximum Input Signal Level Accepted 15 volts peak to peak Input Impedance 35k ohms Signal To Noise Ratio 72dB Output Power Rating 12+ watts RMS @ 5% THD, 4 ohm load – 120 VAC line Low Control 15dB Range @ 50Hz Low Mid Control 12dB Range @ 250Hz High Mid Control 13dB Range @ 1kHz High Control 27dB Range @ 10kHz Input Power Requirements 120 VAC, 60Hz, 30VA 100/110 VAC, 50