Summary of the content on the page No. 1
®
Please read this manual and save it with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver
and Safety Scissors (both not included).
®
Use only with a Power Wheels 6 Volt Rechargeable
Battery with A-style Connector and Built-in Thermal Fuse and
®
a Power Wheels Super 6 Volt Charger (both included).
Product features may vary from the picture above.
Owner's Manual
with Assembly Instructions
For Model K4564
Summary of the content on the page No. 2
T TA ABLE OF CONTENTS BLE OF CONTENTS A A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 C Parts . . . . . . . . . . .
Summary of the content on the page No. 3
WARNINGS AND CAUTIONS B ELECTRICAL HAZARD WARNING Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. ® ® - Use of Power Wheels components in products other than Power Wheels vehicles could
Summary of the content on the page No. 4
PARTS C If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Windshield Vehicle Steering Wheel R
Summary of the content on the page No. 5
WARNING PREVENT FIRE DUos en oot n ly b y paa s R se da PPoow weerr W Whheeeel l s OR OPERA N e v e r m o d i f yTE t h e e l e c t r i c a l TABLE OF CONTENTS PARTS A C Steering Wheel Cap Hood Latch - 2 Spacer - 2 #8 x 4" Screw - 2 Super 6 Volt Charger #8 x ¾" Screw – 3 #10 x 1" Screw – 10 5 /32" x 1½" Pin 6 Volt Battery For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Fasteners Shown Act
Summary of the content on the page No. 6
P PARTS PICTURE ARTS PICTURE D A 18 8 9 3 10 11 7 2 14 17 5 16 4 13 1 15 6 12 1 Vehicle 7 Steering Column 14 6 Volt Battery Parts Not Shown 2 Dashboard 8 Steering Wheel 15 Spacer - 2 #10 x 1" Screw - 10 3 Windshield 9 Steering Wheel Cap 16 Backpack Holder #8 x ¾" Screw - 3 4 Hood 10 Roll Bar 17 Backpack #8 x 4" Screw - 2 5 5 Hood Latch - 2 11 Seat 18 /32" x 1½" Pin Label Sheet - 2 6 Brush Guard 12 Steering Column Cap 13 Super 6 Volt Charger 6 6 K4564pr-0923
Summary of the content on the page No. 7
BATTERY CHARGING E ELECTRICAL HAZARD ELECTRICAL HAZARD WARNING CAUTION Battery can fall out and injure a child Use the charger in dry locations only. if vehicle tips over. Always use battery retainer. About Thermal Fuses PREVENT FIRE Your Power Wheels 6 volt battery with A-style connector - Never modify the electrical system. is equipped with a built-in thermal fuse. The thermal fuse is a self- Alterations could cause a fire resulting resetting safety device which automatically “trips
Summary of the content on the page No. 8
WARNING PR E VEN T F IR E D o no t b yp as s a P o w e r W he e l U Ne seve on r m ly o adify R ed th P e o ele w e r ctr W h ca ee l s OR OP ER AT E i l TBA ABLE OF CONTENTS TTERY CHARGING A E A-Style Charger Connector A-Style Battery Connector 1 NO GAP GAP 2 Incorrect Correct Plug the battery connector and charger connector together. Push Plug the charger into a standard wall outlet. firmly to make sure the two connectors are completely joined. Notes: - Use the charger only in
Summary of the content on the page No. 9
ASSEMBLY F #10 x 1" Screw WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. Seat Tabs 2 Insert a #10 x 1" screw into the back edge of the seat. Tighten the screw. Slots Roll Bar Hole Hole 1 Fit both tabs on the front end of the seat into the slots
Summary of the content on the page No. 10
ASSEMBLY F End of Steering Column Dashboard 5 /32" x 1½" Pin PUSH 6 4 While holding the steering wheel, grasp the steering column and push it up as far as it will go. Place the dashboard on the top side of the vehicle, as shown. 5 Insert the /32" x 1½" pin through the hole in the end of the Insert five #10 x 1" screws into the dashboard. Tighten the screws. steering column. Large Opening UP Steering Wheel Cap Steering Wheel Large Opening Steering Wheel Steering Column PULL Bend Uprig
Summary of the content on the page No. 11
ASSEMBLY F Large Opening UP Large Hole in Dashboard Steering Column Bend Up 10 Insert #8 x ¾" screw through the large opening in the steering column cap and the hole in the steering column. Tighten the screw. 8 Windshield Wiper Insert the steering column (with steering wheel) into the large hole Large in the dashboard. Make sure the large opening in the steering wheel Large Tab and the bend in the steering column are UP. Tab Steering Column Cap Slot Slot End of Steering Column Steering Li
Summary of the content on the page No. 12
ASSEMBLY F Hood Latches Lock Fastener Lock Fastener 14 Unlocked Locked Slots 12 Using a slotted screwdriver, turn each lock fastener in the hood 1 Insert a hood latch into each slot in the front end of the vehicle. /4 turn to the locked position. 1 Turn each hood latch a /4 turn to fit in place. Pull up on the hood IMPORTANT! Remember to keep the lock fasteners locked at all times latches to be sure they are secure. to prevent children from accessing the vehicle battery compartment.
Summary of the content on the page No. 13
ASSEMBLY F Spacers A Holder B 16 #8 x 4" Screws 18 Fit the spacers between the upper holes of the brush Fit the holder to the top edge of the vehicle as shown. A guard and the front end of the vehicle . Insert a #10 x 1" screw into the holder and tighten. Insert two #8 x 4" screws through the two upper holes Replace Backpack in the holder. in the brush guard, through the spacers and into the B front end of the vehicle . Tighten the screws. Backpack 17 Using safety s
Summary of the content on the page No. 14
DECORATION G Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: Wash your hands before applying the labels. Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. After applying a label, rub the label fir
Summary of the content on the page No. 15
DECORATION G 10 10 4 6 1 TM 9 FRONT LEFT SIDE 5 2 FRONT RIGHT SIDE H4435pr-0920 15 K4564pr-0923
Summary of the content on the page No. 16
BATTERY INSTALLATION H ® IMPORTANT! Use only a Power Wheels 6 volt battery with A-style Battery connector and built-in thermal fuse. Use of any other battery will Connector damage your vehicle. Make sure that you charge the battery for ® at least 18 hours using the enclosed Power Wheels Super 6 volt Motor Harness charger before operating your vehicle for the first time. Charge the Connector battery for at least 14 hours after each use of the vehicle. Never charge the battery longer tha
Summary of the content on the page No. 17
BATTERY CARE AND DISPOSAL I Care Disposal ® If a battery leak develops, avoid contact with the leaking acid and Your Power Wheels battery is a non-spillable sealed lead-acid place the damaged battery in a plastic bag. See information below battery. They must be recycled or disposed of in an environmentally for proper disposal. sound manner. If acid comes in contact with skin or eyes, flush with cool water for Do not dispose of a lead-acid battery in a fire. The battery may at least 15
Summary of the content on the page No. 18
SAFE DRIVING RULES J Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still WARNING very immature. Unsupervised driving by children can lead to serious injury. Before children use this vehicle, an adult should carefully evaluate the driving area as well as the children’s skill level and ability Prevent Injuries and Deaths to drive this vehicle safely. Child
Summary of the content on the page No. 19
VEHICLE OPERATION VEHICLE CARE K L Check all screws, cap nuts and their protective coverings regularly IMPORTANT! Use this vehicle ONLY outdoors. Most interior floor- and tighten as required. Check plastic parts on a regular basis for ® ing can be damaged by riding this vehicle indoors. Fisher-Price cracks or broken pieces. will not be responsible for damage to the floor if the vehicle is During snowy or rainy weather, the vehicle should be stored inside used indoors. or under a protect
Summary of the content on the page No. 20
BUMPER-TO-BUMPER* LIMITED WARRANTY M ® *One year limited warranty from the date of purchase on the Power Wheels vehicle. Six month limited warranty on the 6 volt battery. ® ® For the original purchaser, this one year limited warranty covers the Power Wheels ride-on vehicle (purchased from Power Wheels ) against ® defects in materials and workmanship. The six month limited warranty applies only to the 6 volt battery included by Power Wheels with the original purchase of the vehicle. ® This warr
