Grizzly G0624 user manual

User manual for the device Grizzly G0624

Device: Grizzly G0624
Category: Lathe
Manufacturer: Grizzly
Size: 5.32 MB
Added : 4/14/2014
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Grizzly G0624. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Grizzly G0624.

For your convenience

If looking through the Grizzly G0624 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Grizzly G0624 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Grizzly G0624 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Grizzly G0624 User manual - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Grizzly G0624 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Grizzly G0624. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

MODEL G0624
10" BENCHTOP LATHE
OWNER'S MANUAL
Model G0624 shown with optional Model G0625 Bed Extension.
COPYRIGHT © NOVEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL86839 PRINTED IN CHINA

Summary of the content on the page No. 2

����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������

Summary of the content on the page No. 3

Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .................................................................................................................................... 2 Contact Info ................................................................................................................................ 2 Machine Data Sheet ................................

Summary of the content on the page No. 4

INTRODUCTION Foreword Contact Info If you have any comments regarding this manual, We are proud to offer the Model G0624 10" please write to us at the address below: Benchtop Lathe. This machine is part of a grow- ing Grizzly family of fine woodworking machinery. Grizzly Industrial, Inc. When used according to the guidelines set forth in C /O Technical Documentation Manager this manual, you can expect years of trouble-free, P.O. Box 2069 enjoyable operation and proof of Grizzly’s com- Belli

Summary of the content on the page No. 5

Machine Data Sheet � � � � � � �� � � � �� � � � � � � � �� � � � �� �� � � � � �� � �� � � � � �� � � � � � � � �� �� � �� � � � � �� � � � � �� � � � � �� � � � � � � � �� �� � � �� � �� � � � � �� � � � � � � � � ������ ������ ���� ����� ����� ��������� �� ��� �������� ����������� � ������� ��������������������������������������������������������������� ������������������������������������������������������������������������������������������������� ��� ���� � � � � �������������������� �����

Summary of the content on the page No. 6

� � ���������������� ������� ������������������������������������������������������������������������������������������������������������������������������ �� � �� � � ���������� ����� ������������������������������������������������������������������������������������������������������������������������������ �� � ������������������ � ���� ������������� ������������������������������������������������������������������������������������������������������������������������������ ����� ���� ��� �

Summary of the content on the page No. 7

Identification L M K D E J C G N H B I A F O U P Q T S R Figure 1. Model G0624 identification. K. Live Center A. Belt Tension Lock Knob L. Quill Lock Handle B. Belt Cover Lock Handle M. Quill Handwheel C. Belt Cover N. Tailstock D. Headstock O. Bed Extension (optional) E. Faceplate P. ON/OFF Switch F. Tool Rest Base Q. Lathe Bed G. Tool Rest R. Motor H. Tool Rest Lock Handle S. Belt Tension Lever I. Tool Rest Release Lever T. Foot J. Tailstock Release Lever U. Safety Key -5- G0624 10" Benchtop

Summary of the content on the page No. 8

� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �

Summary of the content on the page No. 9

� � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � � � � � � � � � � � � � � � � � � �

Summary of the content on the page No. 10

Additional Safety for Wood Lathes 9. OPERATING DAMAGED LATHE. Never 1. KEEPING GUARDS IN PLACE. Make sure operate the lathe with damaged or worn all guards are in place and that the lathe sits parts. on a flat, stable surface. 10. ADJUSTMENTS/MAINTENANCE. Make 2. EYE/FACE PROTECTION. Always wear sure your wood lathe is turned OFF, dis- eye protection or a face shield when operat- connected from its power source, and all ing the lathe. moving parts have come to a complete stop before st

Summary of the content on the page No. 11

SECTION 2: CIRCUIT REQUIREMENTS 110V Operation Electrocution or fire could result if this machine is not grounded correctly or if your electrical configu- Serious personal injury could occur if you ration does not comply connect the machine to the power source with local and state codes. before you have completed the set up pro- Ensure compliance by cess. DO NOT connect the machine to the checking with a qualified power source until instructed to do so. electrician! Amperage Draw The M

Summary of the content on the page No. 12

SECTION 3: SET UP Set Up Safety Unpacking The Model G0624 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, This machine presents please immediately call Customer Service at serious injury hazards (570) 546-9663 for advice. to untrained users. Read through this entire manu- Save the containers and all packing materials for al to become familiar with possible inspection by the carrier or its agent. the controls a

Summary of the content on the page No. 13

Clean Up Site Considerations The unpainted surfaces are coated with a waxy Floor Load oil to prevent corrosion during shipment. Remove Refer to the Machine Data Sheet for the weight this protective coating with a solvent cleaner or and footprint specifications of your machine. citrus-based degreaser such as Grizzly’s G7895 Some workbenches may require additional rein- Citrus Degreaser. To clean thoroughly, some parts forcement to support both the machine and the must be removed. For opti

Summary of the content on the page No. 14

Assembly Test Run To install the tool rest: Once the assembly is complete, test run your machine to make sure it runs properly and is 1. Turn the release lever on the tool rest base ready for regular operation. so it does not interfere with assembly. The test run consists of verifying the following: 1) 2. Thread the tool rest lock handles into the tool The motor powers up and runs correctly, and 2) rest base (Figure 6) until the threaded ends the safety paddle switch works correctly. of th

Summary of the content on the page No. 15

SECTION 4: OPERATIONS Belt Operation Safety Cover Lock Handle Damage to your eyes and lungs could result Access from using this machine without proper pro- Plate tective gear. Always wear safety glasses and a respirator when operating this machine. Belt Tension Belt Tension Lock Knob Lever Loose hair and cloth- Figure 8. Belt access. ing could get caught in machinery and cause seri- 2. Loosen the belt tension lock knob, and move ous personal injury. Keep the belt tension lever up to re

Summary of the content on the page No. 16

Adjusting Tailstock Adjusting Tool Rest The tailstock is equipped with a cam-action The tool rest is equipped with a cam-action clamping system to secure it to the lathe bed. clamping system to secure it to the lathe bed. When the lever is tightened, a locking plate lifts When the lever is engaged, a locking plate lifts up and secures the tool rest to the bed. up and secures the tool rest base to the bed. To position the tailstock along the bed: To position the tool rest base along the

Summary of the content on the page No. 17

Installing/Removing Spur Center The spur center installs into the headstock spin- dle with a taper fit. To install the spur center: 1. UNPLUG LATHE FROM POWER! 2. Insert the tapered end of the center into the spindle, and push it in quickly and firmly (see Figure 13. Removing spur center using the Figure 12). knock out bar. Installing/Removing Live Center To install the live center: 1. Loosen the quill lock handle (if locked) approximately half a turn counterclockwise. 2. Rotate the quill

Summary of the content on the page No. 18

To remove the live center: 1. Turn the quill handwheel counterclockwise until the tailstock quill bottoms out, causing the center to be forced out of the quill. The tailstock quill lock handle must always be locked down while the lathe is in use. The workpiece can be thrown from the lathe if this step is not observed. Also, the tailstock quill should not protrude from the tailstock housing more than 2'' or the quill will not be Figure 15. Tightening faceplate. supported enough. Failure

Summary of the content on the page No. 19

Figure 17 shows an example of a skew chisel. Spindle Turning Spindle turning (Figure 20) is the operation per- formed when a workpiece is mounted between the headstock and the tailstock. Figure 17. Skew chisel. • Scrapers—Mainly used where access for other tools is limited, such as hollowing oper- ations. This is a flat, double-ground tool that comes in a variety of profiles (Round Nose, Spear Point, Square Nose, etc.) to match many different contours. Figure 18 shows an example of a round

Summary of the content on the page No. 20

1 2. Using a wood mallet, tap the point of the spur 9. Position the tool rest approximately ⁄4" away 1 center into the center of the workpiece, so from the workpiece and approximately ⁄8" that it leaves a center mark, then remove the above the center line, as shown in Figure spur center. 23. 1 3 3. Using a ⁄8" drill bit, drill a ⁄16" deep hole at the center mark. 4. Cut the corners off your workpiece if it is over ��������� 2" x 2" to make turning safer and easier. ���� ��������� 5. Drive t


Alternative user manuals
# User manual Category Download
1 Grizzly G0509G User manual Lathe 24
2 Grizzly G0516 User manual Lathe 18
3 Grizzly G0456 User manual Lathe 1
4 Grizzly G0509 User manual Lathe 3
5 Grizzly G0584 User manual Lathe 2
6 Grizzly G0602 User manual Lathe 30
7 Grizzly G0554Z User manual Lathe 3
8 Grizzly G0653 User manual Lathe 0
9 Grizzly G0657 User manual Lathe 1
10 Grizzly G0658 User manual Lathe 0
11 Grizzly G0657/G0658 User manual Lathe 1
12 Grizzly G0698 User manual Lathe 2
13 Grizzly G0694 User manual Lathe 0
14 Grizzly G0733 User manual Lathe 10
15 Grizzly G0709 User manual Lathe 15
16 Edelbrock 1551 User manual Lathe 0
17 Bushnell 26-0100/26-0102 User manual Lathe 1
18 Delta 46-715 User manual Lathe 10
19 Delta 434-08-651-0006 User manual Lathe 0
20 Delta 46-705 User manual Lathe 0