Summary of the content on the page No. 1
SGCZ2600DL/SGCZ2600DW
848JN393A1 (704)
G G
B B
OWNER’S MANUAL
RECIPROCATORS
SGCZ2600DL
SGCZ2600DW
GB-1
Summary of the content on the page No. 2
SGCZ2600DL/SGCZ2600DW EC DECLARATION OF COMFORMITY We, ZENOAH CO., LTD. 1-9, Minamidai, Kawagoe, Saitama, Japan declare in sole responsibility that the following products referred to in this declaration conform with DIRECTIVE 89/336/EEC, 98/37/EC, 2000/14/EC, 2002/88/EC, 2002/44/EC EN ISO 11806 : 1997 The products referred are : DESIGNATION : RECIPROCATORS MODELS : SGCZ2600DL, SGCZ2600DW SERIAL NUMBERS : SGCZ2600DL 100101 and up SGCZ2600DW 50100101 and up The company named above will keep on fil
Summary of the content on the page No. 3
SGCZ2600DL/SGCZ2600DW SAFETY FIRST Contents Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and 1. Parts location .................................................. 3 for this reason you are requested to read all such instructions 2. Specifications ................................................. 4 G carefully and follow them without fail. 3. Warning labels on t
Summary of the content on the page No. 4
(50ft) 15m SGCZ2600DL/SGCZ2600DW 2. Specification Model SGCZ2600DL SGCZ2600DW Overall size (LxWxH) mm 1950 x 430 x 290 1950 x 650 x 520 Dry weight kg 7.5 7.8 Engine Type Air-cooled 2-stroke gasoline Model Zenoah GZ25N -1 Max output rpm 1.2Hp (0.9kW) at 7500min -1 Idle speed rpm 3000±200min 3 Displacement cm 25.4 Fuel Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil) Carburetor Walbro Diaphragm type Spark plug NGK CMR7A Fuel tank capacity L 0.65 Transmission Centrifugal clutch, Rigi
Summary of the content on the page No. 5
SGCZ2600DL/SGCZ2600DW 5. For safe operation b. At night, at times of heavy fog, 1. Read this manual carefully until or at any other times when you completely understand and your field of vision might be follow all safety and operating limited and it would be diffi- instructions. cult to gain a clear view of the 2. Keep this manual handy so that G working area. you may refer to it later when- B c. During rain storms, during ever any questions arise. Also lightning storms, at times of note, if y
Summary of the content on the page No. 6
SGCZ2600DL/SGCZ2600DW 5. For safe operation BEFORE STARTING part nor the throttle come into THE ENGINE contact with any obstacle when 1. The area within a perimeter of the engine starts. 15 m (50 ft) of the person using the product should be considered WARNING a hazardous area into which no one should enter. If necessary, Never place the throttle into the yellow warning rope, warning high-speed position when starting signs should be placed around the the engine. perimeter of the area. When w
Summary of the content on the page No. 7
SGCZ2600DL/SGCZ2600DW 5. For safe operation • IF SOMEONE COMES HANDLING FUEL 1. Guard against hazardous situa- 1. The engine of the ZENOAH prod- tions at all times. Warn adults to uct is designed to run on a mixed keep pets and children away from fuel, which contains highly flam- the area. Be careful if you are ap- mable gasoline. Never store cans G proached. Injury may result from of fuel or refill the tank of the unit B flying debris. in any place where there is a 2. If someone calls out or
Summary of the content on the page No. 8
SGCZ2600DL/SGCZ2600DW 6. Set up WARNING CONNECTING SWITCH WIRES •Connect the switch wires between the engine and the Never use any screws other than those specified by main unit. Pair the wires of the same color. the manufacturer, or the engine can get loose, result- ing in a hazardous event. HIP PAD •Wrap the hip pad around the shaft tube as shown in IMPORTANT the figure, and fasten the hooks. Tighten the screws gradually by turns. MOUNTING ENGINE 1. Install the engine to the drive shaft so
Summary of the content on the page No. 9
SGCZ2600DL/SGCZ2600DW 7. Fuel ■ FUEL 3. Pour in all of the oil and agitate well. 4. Pour in the rest of gasoline and agitate again for at least one minute. As some oils may be difficult to WARNING agitate depending on oil ingredients, sufficient agi- tation is necessary for the engine to last long. Be • Gasoline is very flammable. Avoid smoking or careful that, if the agitation is insufficient, there is an bringing any flame or sparks near fuel. Make sure G increased danger of early piston
Summary of the content on the page No. 10
SGCZ2600DL/SGCZ2600DW 8. Operation STARTING ENGINE IMPORTANT Avoid pulling the rope to its end or returning it by releas- WARNING ing the knob. Such actions can cause starter failures. The cutting head will start rotating upon the engine 7. Move the choke lever downward to open the choke. starts. And restart the engine. 8. Allow the engine to warm up for a several minutes 1. Rest the unit on a flat, firm place. Keep the cutting before starting operation. head off the ground and clear of surro
Summary of the content on the page No. 11
SGCZ2600DL/SGCZ2600DW 8. Operation HARNESS (DW) While holding the unit by your left WARNING hand securely, press the red button of the buckle. ALWAYS WEAR THE PROVIDED HARNESS WHEN Then take the harness off from your USING THE MACHINE! G (1) shoulders. Always make sure the machine is hooked securely B to the harness. (1) Buckle If you don't, you will be unable to control the machine (DW: Double strap) safely. This can result in injury to yourself or others. USAGE Never use a harness with a def
Summary of the content on the page No. 12
SGCZ2600DL/SGCZ2600DW 8. Operation CUTTING WORK • Road edge This machine does cutting not by a rotary cutter like con- ventional trimmers but by a pair of special blades that moves round within a limited angle at a speed of ap- proximately 1/30 of conventional trimmers. This unique mechanism has brought you many benefits as follow- ing; 1. Since the blade does not cause grass chips and pebbles to be thrown around, you may use less care about your clothing or surrundings. 2. Should the blade hit
Summary of the content on the page No. 13
SGCZ2600DL/SGCZ2600DW 9. Maintenance MAINTENANCE CHART Every Every Every 25 50 100 Before System/components Procedure Note hours hours hours use after after after G fuel leaks, fuel spillage wipe out ✔ B fuel tank, air filter, fuel filter inspect/clean ✔✔ replace, if necessary see adjusting replace carburetor idle adjusting screw ✔ idling speed if necessary clean and readjust GAP: .025 in (0.6 ~ 0.7 mm) spark plug ✔ plug gap replace, if necessary cylinder fins, in
Summary of the content on the page No. 14
SGCZ2600DL/SGCZ2600DW 9. Maintenance WARNING IMPORTANT Make sure that the engine has stopped and is cool • Note that using any spark plug other than those des- before performing any service to the machine. Con- ignated may result in the engine failing to operate tact with moving cutting head or hot muffler may re- properly or in the engine becoming overheated and sult in a personal injury. damaged. •To install the spark plug, first turn the plug until it is AIR FILTER finger tight, then tight
Summary of the content on the page No. 15
SGCZ2600DL/SGCZ2600DW 9. Maintenance INTAKE AIR COOLING VENT PROCEDURES TO BE PERFORMED AFTER EV- ERY 100 HOURS OF USE WARNING 1. Remove the muffler, insert a screwdriver into the vent, •Never touch the cylinder, muffler, or spark plugs and wipe away any carbon buildup. Wipe away any G with your bare hands immediately after stopping carbon buildup on the muffler exhaust vent and cylin- B the engine. The engine can become very hot when der exhaust port at the same time. in operation, and doing
Summary of the content on the page No. 16
SGCZ2600DL/SGCZ2600DW 12. Troubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment screw → out of normal range → adjust to normal range sparking (no spark) → spark plug is fouled/wet → clean/dry → plug gap is incorrect → correct (GAP: 0.6 ~ 0.7 mm) spark plug → disconnected → retighten Case 2. Engine starts but does not keep running/hard re-starting CHE
