Dell PowerApp 200 user manual

Summary of the content on the page No. 1



 
The Dell™ PowerApp™ 200 appliance is an ultra-slim, full-featured, rack-mounted,
turn-key device with an embedded operating system. Combined with innovative setup
and administrative tools and utilities, the PowerApp 200 provides specific and reliable
functionality in a rack-dense form factor.

 

PowerApp systems offer the following major features:
® ®

One Intel Pentium III microprocessor.
The Pentium III microprocessor includes MMX™ technology designed to

Summary of the content on the page No. 2

A power-supply distribution board to accommodate up to two independent power supplies. One power supply is standard; a second can be added to make the sys- tem redundant.
A single 1.44-MB, 3.5-inch diskette drive.
A 24X integrated drive electronics (IDE) CD-ROM drive. The system board includes the following integrated features:
Three PCI slots located on the riser card.
An Intel PRO/100+ network interface controller (NIC), which provides an Ethernet interface.
An Adaptec AIC-7899

Summary of the content on the page No. 3

  The following controls and indicators are behind the bezel on the computer's front panel (see Figure 1-1). hard-disk drive activity indicator system status indicator power button and power indicator
  
 
 
The power button/indicator on the front panel controls the AC power input to the system's power supply.
The green indicator in the center of the power button lights up when the power supply is turned on and the system is receiving DC power. Whe

Summary of the content on the page No. 4

mouse connector serial port 1 power supplies (2) connector USB connector network interface parallel port serial port 2 video keyboard controller connector connector connector connector connector
   
  The system BIOS detects the presence of external devices when you boot or reboot your system. When you connect external devices to your computer, follow these guidelines:
Check the documentation that accompanied the device for specific installation and configur

Summary of the content on the page No. 5

For more information on these help tools, see “Getting Help” in your Troubleshooting Guide.

 For information about the system setup program, refer to the software documenta- tion included with your appliance. support.dell.com Introduction 1-5

Summary of the content on the page No. 6

1-6 Dell PowerApp 200 Systems User’s Guide