Summary of the content on the page No. 1
User's Manual
CAXM Series
Summary of the content on the page No. 2
Preface Copyright Please respect copyrighted content. Duplication or modification of this publication in whole or in part is prohibited without express or written authorization. Usage Strong impacts or dropping the product may cause damage. Only allow qualified personnel to repair this product. Disassembling or opening this product will void your warranty. Disclaimer Cavalry is not liable for compensation for data loss which may result from a malfunction of the product or from changes due to
Summary of the content on the page No. 3
Thank you for choosing Cavalry. We at Cavalry extend our sincere gratitude for your purchase of this product. We hope our dedication to delivering high quality products with excellent customer service will ensure your continued interest in our products. This manual will assist in the operation of the product. To optimize your experience with this product, we recommend reading this entire manual before usage. Please keep this manual for future reference. 3 3
Summary of the content on the page No. 4
Table of Contents Preface .................................................................................................... 2 List of Accessories ............................................................................. 5 Product Illustrations ........................................................................... 6 Features ............................................................................................. 8 Setup Instructions ...............................................
Summary of the content on the page No. 5
List of Accessories 1. External power adapter / power cord (may vary with product) 4 2. SATA to eSATA adapter cable with bracket 3. eSATA cable 4. USB 2.0 cable 5. Resources CD 3 2 1 5 5
Summary of the content on the page No. 6
Front 1 1. LED Light Indicator 6 6
Summary of the content on the page No. 7
Back 2. eSATA port 3. Power Switch 3 2 4. USB 2.0 port 5. Power jack 4 5 7 7
Summary of the content on the page No. 8
Features Plug-and-play for Windows 2000/XP/Vista USB 2.0 and eSATA interface Pre-formatted to NTFS Exceptional heat dissipating ability Hard drive activity LED Nearly silent operation Slim and lightweight stackable design Designed for use with a PC, formattable for use with a Mac 8 8
Summary of the content on the page No. 9
Setup Instructions Follow the steps below to successfully set up your Cavalry External Hard Drive with your computer. Step 1. Start your computer and wait for Windows to load completely. Step 2. Connect the power adapter to the drive. (Fig. 1) Then plug the power adapter into an electrical outlet. Fig. 1 9 9
Summary of the content on the page No. 10
Step 3. Connect the square end of the USB cable to the hard drive. (Fig. 2) Then connect the flat end of the USB cable to the USB port on your computer. (Fig. 3) Step 4. Turn the power switch on. USB Cable Plug USB Port Fig. 3 Fig. 2 NOTE: SATA users: install the bracket when the computer is off. Connect the drive to the bracket, turn on the drive and then turn on the computer. See the eSATA bracket installation guide located in the "Contents/CAXM" folder of the Resources CD. NOTE: Connect t
Summary of the content on the page No. 11
Step 5. Installing drivers for the Cavalry External Hard Drive. Windows 2000/XP/Vista Plug-and-play. No device drivers or configuration required. The computer will detect the USB External Hard Drive as a new USB device and display messages on the bottom-right corner reading "USB Mass Storage Device Detected" and "Your new hardware is installed and ready to use." Windows 98/Me 1. Make sure Windows 98/Me is fully updated 2. Download drivers from www.cavalrystorage.com/su_download.htm Click on
Summary of the content on the page No. 12
4. Right-click on the yellow question mark indicating an unknown external storage device. 5. When the device driver wizard starts, click on the "Browse" button to select the search directory to find drivers. 6. Find the USB 2.0-98 driver in the extracted file. 7. Click "Next" to continue. Mac OS X Reformat the external hard drive using Disk Utility on the OS. See "Formatting Instructions.pdf", found in the "Contents" folder of the CD Step 6. Your external hard drive is now ready to use. NOT
Summary of the content on the page No. 13
Troubleshooting LED light indicator does not turn on Make sure the power adapter is securely connected to a working electrical outlet. Secondly, make sure the USB / eSATA cable is inserted correctly into the hard drive and the computer. Turn on the power switch (page 7). Computer does not detect hard drive Make sure the USB / eSATA cables are securely connected. If this still does not work, attach another known working device and working cable into the USB / eSATA port on the computer. If t
Summary of the content on the page No. 14
Loud noises coming from external hard drive In most cases, loud noises coming from the drive suggest a defective drive or a loose part. We apologize for any inconvenience this may cause. Please contact customer service for assistance. Hard drive will not work with my Mac Macs require special formatting. Format the hard drive according to the instructions provided by your Mac. Alternatively, follow the "Formatting Instructions" pdf, located in the "Contents" folder of the Resources CD or onl
Summary of the content on the page No. 15
Warranty This product comes with a one year warranty from the date of purchase. Please register your product at www.cavalrystorage.com/prodreg.htm to activate the warranty. Please have your Serial Number and Model Number ready. We are not responsible for any loss of data. Please back up your data often to avoid unexpected losses. Contact Cavalry Storage, Inc. 555 E. Easy St. Simi Valley, CA 93065 customersupport@cavalrystorage.com www.cavalrystorage.com 14 15
Summary of the content on the page No. 16
CA1193 061208
