Summary of the content on the page No. 1
English8188
TABLE OF CONTENTS
SAFETY INSTRUCTIONS .................................................................. 2
INTRODUCTION ............................................................................. 4
Package Contents ..................................................................... 4
Installing or Removing the Tilt/Swivel Base ............................ 5
Specifications ........................................................................... 6
Recommended Use of the Monitor
Summary of the content on the page No. 2
SAFETY INSTRUCTIONS 1. Please read carefully all of these instructions below and keep the manual for later use. 2. Please install the swivel base for this product before using it. 3. The voltage ratings and the rated frequency are on the overlay centered at the rear side of this product. Do not connect with any other sources of voltage or frequency, and, please follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning and use a damp
Summary of the content on the page No. 3
English8388 SAFETY INSTRUCTIONS Usually when this product is sold a suitable power cord is provided by the manufacturer. However, this product is sometimes resold or transported to another area with a different power system and safety requirements. Please pay attention to the selection of a suitable power cord. The plug on the power cord is intended to serve as the disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible. 9. Do not allow anything
Summary of the content on the page No. 4
PR960F User's Manual INTRODUCTION Introduction The monitor is a multiple frequency high-resolution color monitor for IBM compatible PC's or Macintosh and workstation systems. The monitor is equipped with microprocessor based intelligence and multiple frequency scanning capability, allowing it to provide maximum compatibility for various system platforms. The monitor uses the latest screen technology including a 0.24mm SONY FD Trinitron® CRT to display crisp text and vivid color graphics. The ful
Summary of the content on the page No. 5
English8588 INTRODUCTION Installing or Removing the Tilt/Swivel Base 1.Turn off the system and all attached peripherals. 2.Carefully set the monitor upside down. Remove the Tilt/Swivel Base: 1.Squeeze and hold the latches. 2.Pull the tilt/swivel base to the rear of the monitor and lift to remove the base. Installing the Tilt/Swivel Base: 1. Align the base with the slots on the bottom of the monitor and insert the tilt/ swivel base into the slots. 2.Push the tilt/swivel base firmly toward the fro
Summary of the content on the page No. 6
INTRODUCTION Specifications Color Picture Tube 19" (18" viewable screen size) diagonal measurement, 90 degree deflection, SONY FD Trinitron® CRT, anti- glare, anti-reflection, anti-static, medium short persistence phosphor AG Pitch 0.24 mm(center) Input Signal Video: 0.7 Vp-p/75 ohm, analog positive Sync: Separate Sync.: TTL Level Horizontal Sync.: positive/negative Vertical Sync.: positive/negative Composite Sync.: TTL Level, positive/negative on green video (0.3Vp-p Negative) Scan Frequency Ho
Summary of the content on the page No. 7
English8788 INTRODUCTION Recommended Use of the Monitor When setting up and using the monitor, pay special attention to the following for optimum performance: Do not use your monitor against a bright background or where sunlight or other light sources will shine directly on the screen. The monitor should be placed just below eye level (10°~15°) for optimum viewing. Set the monitor's brightness to match ambient room light. For optimum focus, the contrast control should not be set to the m
Summary of the content on the page No. 8
CONTROLS AND ADJUSTMENTS Controls and Adjustments Once you have installed the monitor with your system, please read the instructions of this section which give you some guidelines on how to use the monitor more efficiently. It leads you through the various function of the user controls and explains how to adjust the monitor to your personal preference. Front User Controls 1. Power Switch To turn the monitor on or off. 2. Power LED Indicator As long as the monitor is powered, this indicator is l
Summary of the content on the page No. 9
English8988 CONTROLS AND ADJUSTMENTS (1) Press " " or " " to open the On-Screen menu function. Seven adjustment 3 4 functions will appear on the On-Screen menu. Press " " key to scroll down through the selections. 3 General Picture Geometry Color Advance Property Signal A.General a. Press " " to select Brightness or Contrast. 4 General Picture b. Press "+" or "" for preferred picture. 50 Geometry 100 Color Advance Property Signal Brightness B. Picture a. Press " " to select Vertical and Hor
Summary of the content on the page No. 10
CONTROLS AND ADJUSTMENTS E. Advance a. Press " " to select Moire, Converge or Degauss. 4 General Picture b. Press "+" to proceed. Moire Geometry Converge c. Press "+" or "" to gain preferred picture. Color Purity Advance Degauss Property Signal :Proceed E-1. Moire a. In Moire, press "+" to proceed. Moire b. Press "+" or "" to gain preferred picture. 0 E-2. Converge a. In Converge, press "+" to proceed. R R B b.Press " " to select Horizontal or Vertical adjust. B 4 c. Press "+" or "" to gain
Summary of the content on the page No. 11
English81188 CONTROLS AND ADJUSTMENTS F-1. Status The status show the current input signal information General Status such as Resolution, Horizontal Frequency and Vertical Picture Recall Geometry Language Frequency. 640x480 H:31.5KHz V:60.5 Hz F-2. Recall a. Press " " to select factory setting of picture or General Status 4 Picture Recall converge. Geometry Language b. Press "+" to preceed. Picture Converge c. "+" confirms action, "" cancels action. Purity :Proceed General Status Picture Recal
Summary of the content on the page No. 12
CONTROLS AND ADJUSTMENTS Energy Declaration This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which also supports the VESA DPMS standard to fulfill the requirements of the NUTEK specification 803299/ 94/96. The time settings for switching to a power saving mode are adjusted from the system unit by software. From the first indication of inactivity to pow
Summary of the content on the page No. 13
English81388 TECHNICAL INFORMATION Compatibility This color monitor supports multiple operating platforms such as IBM compatible and Macintosh family computers. This section provides you with detailed information on the pin assignment of the D-Sub connector and the preset timing chart of the prevailing video standards. Pin Assignment 1 5 6 10 15 11 Male Mini D-15 Connector Signal 15 Pin Mini D-Sub Red Video 1 Green Video 2 Blue Video 3 Horizontal Sync 13 Vertical Sync 14 Ground 4,5,6,7,8,10,11 N
Summary of the content on the page No. 14
TECHNICAL INFORMATION 14 ¨¨¨ English Note:This monitor is equipped with a micro-processor which allows the user Preset Timing Chart to set his own preferred mode(s) beyond those standard mode listed below. HORIZONTAL VERTICAL VESA VESA MAC VESA MAC VESA VESA VESA VESA VESA 1024x768 Display Format VGA 640x480 832x624 800x600 1152x864 1024x768 1024x768 1280x1024 1280x1024 1600x1200 1600x1200 at 100Hz at 85 Hz at 75 Hz at 85 Hz at 75Hz at 75 Hz at 85 Hz at 75 Hz at 85 Hz at 75 Hz at 85 Hz Hotizonta
Summary of the content on the page No. 15
English81588 TROUBLESHOOTING Troubleshooting Before calling an authorized service center please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your adapter with the specifications outlined in sections "Pin Assignment Table" and "Preset Timing Chart". Problem Items to check No picture Power Switch should be in the ON position and the power cord should be properly connected. Check the c
Summary of the content on the page No. 16
90° DIMENSIONS unit: mm 460.0 372.0 485.0 285.0 263.0 13° 4° 16 ¨¨¨ 90° English 382.0 280.0 423.0 469.0
