Summary of the content on the page No. 1
M150 Flat Panel Display
Touch Monitor User Guide
3M Touch Systems
Read and understand all safety information
contained in this document before using this product.
3M Touch Systems Proprietary Information
Summary of the content on the page No. 2
2 M150 FPD Monitor Installation Guide The information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of 3M Touch Systems. 3M may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not
Summary of the content on the page No. 3
Contents Overview Important Safety Information....................................................................................5 Intended Use .......................................................................................................5 Explanation of Symbols......................................................................................6 Service and Repair Indicators.......................................................................
Summary of the content on the page No. 4
4 M150 FPD Monitor Installation Guide Chapter 3 Video Display Options Adjusting the M150 Video Display.........................................................................23 Auto Config ......................................................................................................24 Brightness .........................................................................................................24 Contrast........................................................................
Summary of the content on the page No. 5
Overview Welcome to the world of 3M Touch Systems — a world where using a computer is as simple as touching the screen. This guide describes how to set up your M150 Flat Panel Display (FPD) touch monitor. This document assumes you have basic computer skills. You should know how to use the mouse and keyboard, choose commands from menus, open and run application programs, and save files. Important Safety Information Read and understand all safety information before using this product. F
Summary of the content on the page No. 6
6 M150 FPD Monitor Installation Guide CAUTION To avoid the risk of electric shock which may result in minor or moderate injury: The socket-outlet should be installed near the equipment and should be easily accessible. Use a power cable that is properly grounded. Always use the appropriate AC cord certified for the individual country. Some examples are listed below: USA UL Switzerland SEV Canada CSA Britain BASE/BS Germany VDE Japan Electric Appliance Control Act Do not service
Summary of the content on the page No. 7
Overview 7 • To avoid ergonomic concerns: Do not install the monitor in a manner or location with awkward accessibility. Extended use may result in muscle, tendon, or fixed posture strains. It is recommended you take periodic breaks from continuous use. Service and Repair Indicators Do not attempt to service this unit yourself. Removing the display cover may expose you to dangerous voltage or other risks and will void the warranty. WARNING To avoid the risk of fire which could resu
Summary of the content on the page No. 8
8 M150 FPD Monitor Installation Guide • Technical Support Hot Line: 978-659-9200 • Technical Support Fax: 978-659-9400 • Toll Free: 1-866-407-6666 • Email: US-TS-techsupport@mmm.com 3M Touch Systems Worldwide Offices All offices can be reached through the website: http://www.3mtouch.com/. • United States 978-659-9000 • United Kingdom +44 (0) 1235-444400 • Australia +61 3 9582 4799 • Canada 604-521-3962 • France +33 (1) 30 31 68 32 • Germany +49 (0) 2131 14-4003 • Hong Kong/China (85
Summary of the content on the page No. 9
CHAPTER 1 Introduction to Flat Panel Displays The 3M Touch Systems product line of Flat Panel Display (FPD) touch monitors offers the M150 monitor for desktop and countertop applications with built-in multimedia options. Yoke Adjustment Knob Spine The newly redesigned M150 monitor features an innovative design adjustable to approximately 60° off the vertical to accommodate different counter and user heights, a positive locking mechanism, a weighted base for additional stability, a tou
Summary of the content on the page No. 10
10 M150 FPD Monitor Installation Guide Capacitive and Resistive Options The monitor is available with 3M Touch System’s ClearTek® capacitive touch screen. Capacitive is the touch screen of choice for public access applications requiring high levels of durability and reliable performance 24 hours a day, 7 days a week. For those applications that require flexibility of input, including gloved hand use, we offer the M150 with a 5-wire resistive touch screen. This technology has been tested
Summary of the content on the page No. 11
CHAPTER 2 Setting Up Your M150 FPD Monitor This chapter describes how to set up and integrate your 3M Touch Systems M150 FPD monitor into a touch application. You need to complete the following tasks: • Unpack the components • Connect the video, touch screen, and power cables • Power on the monitor and test your setup • Install the touch screen software • Calibrate the touch screen System Requirements The M150 flat panel touch monitor requires a personal computer (PC). This touch
Summary of the content on the page No. 12
12 M150 FPD Monitor Installation Guide Unpacking Your Touch Monitor Carefully unpack the carton and inspect the contents. Your M150 monitor includes the following cables and accessories: 15-pin video cable 9-pin RS-232 serial communication cable (or USB cable if applicable) AC power cable AC/DC power supply (12V DC output) 3M CD with touch screen software, documentation, and utilities Multimedia audio cables Arm Mounting Option The unit has a 75 mm VESA mount
Summary of the content on the page No. 13
Chapter 2 Setting Up Your M150 FPD Monitor 13 Figure 1 Disassembling the Yoke & Base for Arm Mounting Step 1 -- Unlock the yoke. With the unit laying face down safely and securely on a nonabrasive surface, remove the two screws connecting the top of the yoke. Lift yoke and pull down to disengage tabs to remove. Step 2 -- Remove the bottom two screws holding the hinge cover in place. Remove the small hinge cover. Step 3 -- Remove the inner four screws holding the base to the FPD and gen
Summary of the content on the page No. 14
14 M150 FPD Monitor Installation Guide Access to the Video Controls The controls for adjusting the video display are located on the front of the M150 FPD monitor. These buttons let you display the on-screen menu and adjust the phase, image position, contrast, and brightness. Make sure you have unobstructed access to the video controls once the M150 monitor is installed. Figure 3 Video Display Controls MENU MENU SELECT Microphon ◄/Left SELECT ►/Right LED Adjusting the Viewing Angle
Summary of the content on the page No. 15
Chapter 2 Setting Up Your M150 FPD Monitor 15 Note: When the adjustment knob is horizontal it is locked; when it is in the vertical position it is unlocked. Always maintain adequate ventilation to protect the display from overheating and to ensure reliable and continued operation. Installing the Video Card and Video Driver Before you can connect your touch monitor, make sure your computer has a video card and driver already installed for the monitor. The video driver is supplied by the vi
Summary of the content on the page No. 16
16 M150 FPD Monitor Installation Guide Using the Standard Controls for the Video Card In addition to the standard controls on the monitor, each video card has several controls that let you adjust the display settings. The software and driver for each video card is unique. In most cases, you adjust these settings by using a program or utility provided by the manufacturer of the video card. For example, you can use the Windows Display Properties control panel to adjust the desktop area (r
Summary of the content on the page No. 17
Chapter 2 Setting Up Your M150 FPD Monitor 17 ID Tech MagTek all MiniMag™ readers all "mini" sized readers IDT 3331-02U IDT 3321-33 2180201 IDT 3331-12U IDT 3321-33PP 2180202 IDT 3331-23U IDT 3331-02 2180203 IDT 3331-33U IDT 3331-12 2180204 IDT 3321-02 IDT 3331-23 2180205 IDT 3321-02PP IDT 3331-33 2180206 IDT 3321-12 IDT3301-02 21040103 IDT 3321-12PP IDT3301-12 21040104 IDT 3321-23 IDT3301-23 IDT 3321-23PP IDT3301-33 Figure 6 Card Reader Mounting and Cabl
Summary of the content on the page No. 18
18 M150 FPD Monitor Installation Guide 4. Plug the AC/DC power supply into the M150 FPD. Be sure to use the power supply included with the monitor. Figure 7 Identifying Your Monitor Connections Touch Screen Line In Power Video Connection Microphone out WARNING To avoid the risk of electric shock which could result in serious injury or death: This device must be operated with the original power supply, part number: HJC, HASU05F or CHI, CH-1234. CAUTION To avoid the risk
Summary of the content on the page No. 19
Chapter 2 Setting Up Your M150 FPD Monitor 19 Route all wiring and cabling away from heat sources and sharp metal edges to avoid damage. Also, keep the touch screen cable away from sources of electromagnetic and radio frequency interference. WARNING To avoid the risk of electric shock which could result in serious injury or death: • Do not use a damaged power supply. • Do not use a power cord that is frayed or otherwise damaged. Cable Management System Figure 9 Removing the Cable
Summary of the content on the page No. 20
20 M150 FPD Monitor Installation Guide Testing the M150 FPD Note: The M150 FPD has a power status light located on the front of the bezel. After connection, turn on the power switch located at the bottom of the front bezel. Before you test your touch monitor, make sure all cables are connected properly and routed through the cable management system. Be sure to tighten all cable screws. To test that the monitor is working properly: 1. Turn on your computer. 2. Make sure the video image
