Our goal is to provide you with a quick access to the content of the user manual for FujiFilm BB10768-301(1). Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with FujiFilm BB10768-301(1).
If looking through the FujiFilm BB10768-301(1) user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual FujiFilm BB10768-301(1) but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to FujiFilm BB10768-301(1). If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
USB Mass Storage Driver
Quick Start Guide
Thank you for purchasing these FUJIFILM products.
This Quick Start Guide provides you with a simple summary of how connect your PC
and camera via the USB ports and how to install the software provided in this package
on your personal computer (PC). Read this guide carefully to ensure that you use the
For detailed information on how to use the Exif Viewer and DP Editor software, refer to
6. DISCLAIMER OF WARRANTY. EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJI PROVIDES PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJI SHALL MAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING, IMPORTANT BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE SECRET, OR Be sure to read this page before using the Software. ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY, MARCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. 7. L
Windows Introduction Contents Software Overview This section briefly describes the software programs provided on the enclosed IMPORTANT ....................................................................................... 2 CD-ROM. Contents ............................................................................................. 4 Introduction........................................................................................ 5 USB Mass Storage Driver Software Overview ................
Windows Installing the Software Installation on a Windows PC Pre-installation Checklist Installing the USB Driver This section describes the setup procedure for using the USB Driver on Windows. Hardware and software requirements 1. Switch on your PC and start up Windows. To run this software, you must have the hardware and software described below. Check your system before you begin the installation. (If you are using Windows 2000 Professional, log on as an Administrator group.) Compatible PCs :
Windows 9. Select the Windows 98 \USBDRV\WIN98 folder 6. The “Add New Hardware Wizard” dialog appears. on the CD-ROM drive, Click [Next >]. click the [OK] button, and then click [Next >]. in the “Add New NOTE Hardware Wizard” If this Wizard doesn’t appear, update the dialog box. USB driver (See P.20). TIP When there is a plus mark “ + ” to the left of the Utilities folder, clicking the “ + ” to the left of the folder name opens the folder and shows the folders inside. 10. Check that 7. Select “S
Windows Windows Millennium Edition Windows 2000 Professional 6. The “Add New 6. The “Found New Hardware Wizard” Hardware Wizard” window opens. Click window opens. Click the [Next >] button. the [Next >] button. NOTE NOTE If this Wizard doesn’t appear, update the If this Wizard doesn’t appear, update the USB driver (See P.20). USB driver (See P.20). 7. When the “Select Other 7. Select “Search for a Driver” window opens, suitable driver for my select USB Mass device (recommended)” Storage in the \
Windows 10. Select Installing the Enclosed Applications \USBDRV\WIN2KPRO 1. Quit any other applications that are running. on the CD-ROM drive Quit all other active applications until no and click the [Open] applications are shown in the taskbar. button. TIP
Windows Exif Viewer, DP Editor, QuickTime and Exif Launcher are installed sequentially. 6. When the DP Editor setup ends, the QuickTime To stop the installation process, click the [Cancel] button. The current setup Setup program starts up. program stops and installation skips to the next application program. Proceed with the installation as directed by the on-screen instructions. 3. Double-click “Viewer” in the CD-ROM window. When the “Viewer” window appears, ✽ In the “Enter Registration” window
Windows Using the User’s Guide Using the Software on Windows To read the User’s Guide supplied on the CD-ROM, you must have Adobe Connecting the Camera and PC and Viewing Images Systems’ Acrobat Reader installed. ✽ Refer to the Owner’s Manual for your camera for information on using the camera. Installation of Acrobat Reader 1. Start up your PC and double-click the “My 1. Switch on your PC and start up Windows. Computer” icon. 2. Load the CD-ROM into the CD-ROM drive on your PC. 3. Quit any othe
Windows If Exif Viewer and Exif Launcher are 6. To exit Exif Viewer, select “Exit” from the “File” installed, Exif Viewer starts up and the menu or click the [Close] button in the main window shown here appears. window. TIP ✽ For more information on using Exif Viewer or DP Editor, refer to the User’s Guide • When you install Exif Launcher, it is (PDF document) on the CD-ROM. registered in the startup menu and is launched automatically when 7. Check that the camera display indicates that data Win
Windows Updating the USB Driver on a Windows PC Update the USB Driver in the following situations: NOTE If you cannot find USB Mass Storage in the “USB Controller” list, look under (1) When you want to upgrade the driver version “Other devices”. (2) When you have installed the driver but the software does not run 8. Select the “Driver” tab and click the [Update Updating the USB Driver for Windows 98 and Windows Me driver…] button. This launches the Upgrade Device 1. Switch on your PC and launch
Macintosh Uninstalling the Software on a Windows PC Installation on a Macintosh Uninstalling Exif Viewer, DP Editor and Exif Launcher Pre-installation Checklist You can automatically uninstall these application programs using “Add/Remove Hardware and software requirements Programs” in the Control Panel. To run this software, you must have the hardware and software described below. Check NOTE your system before you begin the installation. • Use this procedure only when the installed software is n
Macintosh Installing the Software 3. Check whether File Exchange is active. Installing the USB Driver To use a media that is supported by the camera, the File Exchange utility supplied 1. Switch on your Macintosh and start up Mac OS. with Mac OS must be running. Select the Extensions Manager in the Control Panels and check that the File Exchange check box is ticked. If not, click in the box so that an [X] appears and then restart your Macintosh. 2. Version verification and updating for iMac. If
Macintosh 5. Connect the camera to your Macintosh. Installing the Enclosed Applications 1 Load the media into the camera, switch the camera on and set the Mode dial to “Playback” mode. 1. When you load the enclosed CD-ROM into the CD-ROM drive and double-click the CD-ROM icon, NOTE the “Exif Viewer” folder appears. Some cameras support storage media other than SmartMedia. 2. Copy the “Exif Viewer” 2 Use the USB cable to connect the camera to the USB port on your Macintosh. folder to your hard N
Macintosh Using the User’s Guide Using the Software on a Macintosh To read the User’s Guide supplied on the CD-ROM, you must have Adobe Connecting the Camera and Macintosh and Viewing Images Systems’ Acrobat Reader installed. ✽ Refer to the Owner’s Manual for your camera for information on using the camera. Installation of Acrobat Reader 1. Start up your Macintosh. 1. Switch on your Macintosh. 2. Load the CD-ROM into the CD-ROM drive on your Macintosh. 2. Load a media containing photographed ima
Macintosh Uninstalling the Software on a Macintosh 6. When you double-click a thumbnail image directly, NOTE Use this procedure only when the installed software is no longer required or the image is displayed in an Image window. when software installation fails. The Image window closes when the Close box in the main window is clicked. Uninstalling the USB Driver You can also copy an image to the hard disk by First, check that the digital selecting the thumbnail image dragging it onto the camera
Troubleshooting If problems arise and the USB Driver is not running correctly, check the items (Mac) Is the USB Driver active? listed below. Solution: Select “USB04CB_StorageShim” and “USB04CB_StorageDriver” in the Extensions Manager and restart your Macintosh. The camera and PC are connected but no removable disk icon is displayed. The PC hangs when I access the media. Is the camera switched on? (Win) When opening the Device Manager, there is a yellow “!” mark next to the Solution: Switch
When I install the driver, the “Could not find a driver for this Windows-specific Problems device” message appears. The camera is connected to my PC but the driver installation will The installer cannot read the device driver due to a problem with your PC not start. setup. Solution: Select “\USBDRV\WIN98” on the CD-ROM drive. Is the camera switched on? Solution: Switch the camera on. Refer to the Owner’s Manual supplied with the When I install the driver, the “Could not find UMAS04CB.INF” ca
My PC does not shut down correctly. Macintosh-specific Problems Some PCs will not shut down correctly while the FUJIFILM Digital Cameras is This message appeared when I connected the camera to my still connected to the USB interface. ✽ Macintosh. Solution: In future, use the correct procedure to disconnect the USB cable connecting the FUJIFILM Digital Cameras to your computer before quitting Is the USB Driver installed? Windows. Solution: Install the driver on your ✽ See page 19 if you are u
|1||Sony BVM-D20F1U, BVM-D20F1E, BVM-D20F1A, BVM-D24E1WU, BVM-D24E1WE, BVM-D24E1WA, BVM-D32E1WU, BVM-D32E1WE, BVM-D32E1WA||Computer Monitor||14|
|2||Sony 500A3WE||Computer Monitor||15|
|3||Sony BVM-L170||Computer Monitor||18|
|4||Sony AEP MODEL CPD-E200E||Computer Monitor||23|
|5||Sony BVM-D32E1WU, BVM-D32E1WE, BVM-D32E1WA, BVM-D24E1WU, BVM-D24E1WE, BVM-D24E1WA, BVM-D20F1U, BVM-D20F1E, BVM-D20F1A||Computer Monitor||27|