Summary of the content on the page No. 1
USER GUIDE AND SPECIFICATIONS
NI PMA-1115
Portable Monitor Accessory
This document includes an overview and specifications for the
NI PMA-1115 Portable Monitor Accessory.
Overview
The National Instruments PMA-1115 is a monitor and keyboard accessory
for use with NI 8-slot PXI chassis. It includes the following features:
• 15 in. high-brightness TFT LCD touch screen panel
� 105-key English keyboard and touchpad
� Hardware for mounting to NI 8-slot PXI chassis
� Anti-glare tempered glass for LCD
Summary of the content on the page No. 2
� Video cabling to connect PMA-1115 to PXI controller � Right-angle-to-vertical USB cable �Driver CD � Cable ties to organize power cabling � Interlocking fastener to secure power adapter Mounting The NI PMA-1115 includes a complete mounting kit for attachment to any NI 8-Slot PXI chassis. This kit contains an adapter plate with provisions to relocate the carrying handle as well as all required fasteners. Complete the following instructions to install the NI PMA-1115. 1. Place chassis on its l
Summary of the content on the page No. 3
1 2 1 Handle covers 2 Handle assembly Figure 2. Removing the Handle 3. Remove the handle from the chassis. Retain the handle. Discard the screws. 4. Attach the adapter plate to the chassis using the supplied M4× 8 pan-head screws, as shown in Figure 3. 1 (6x) 1M4 × 8 pan-head screws Figure 3. Installing the Adapter Plate © National Instruments Corporation 3 NI PMA-1115 User Guide and Specifications
Summary of the content on the page No. 4
5. Reinstall the handle using the supplied 4-40 × 5/16 pan-head screws, as shown in Figure 4. Reinstall the handle covers by snapping them over the handle mounting plates. 1 (4x) 2 1 Handle covers 24-40 × 5/16 pan-head screws Figure 4. Reinstalling the Handle and Handle Covers NI PMA-1115 User Guide and Specifications 4 ni.com
Summary of the content on the page No. 5
6. Orient the chassis and PMA-1115 as shown in Figure 5. Install the remaining M4× 8 pan-head screws. 1 (4x) 1M4 × 8 pan-head screws Figure 5. Installing the PMA-1115 7. Open the keyboard and LCD, as shown in Figure 6. Install the supplied 6-32× 3/8 flat-head screws in the lower corners of the PMA-1115. 1 16-32 × 3/8 flat-head screws Figure 6. Installing the Lower Mounting Screws © National Instruments Corporation 5 NI PMA-1115 User Guide and Specifications
Summary of the content on the page No. 6
8. If desired, use the provided interlocking fastener to attach the AC adapter to the unit. One suggested location is shown in Figure 7. Cable ties are also provided to organize the power cabling. Figure 7. Suggested Location for Attaching AC Adapter Note Do not place the AC adapter over any vent holes on the chassis cover, as this may cause chassis cooling issues. System Configuration The On-Screen Display (OSD) controls on the side of the PMA-1115 provide standby functionality, as well as
Summary of the content on the page No. 7
Ordering Information To order the NI PMA-1115 kit or power cords, refer to the following kit numbers. NI PMA-1115 Kit NI PMA-1115 Portable Monitor Accessory................................. 780215-01 Additional Power Cords North American 240 VAC ..................... 763068-01 Japanese 100 VAC ................................. 763634-01 United Kingdom 240 VAC .................... 763064-01 Swiss 220 VAC...................................... 763065-01 Australian 240 VAC.........................
Summary of the content on the page No. 8
Display area ............................................11.97 × 8.98 in. (30.41 × 22.81 cm) Contrast ratio ..........................................500:1 Brightness ...............................................300 NTS Frame rate ...............................................60 Hz (typical), 75 Hz (maximum) Color .......................................................16.2 M colors Viewing angle.........................................160° up and down 160° right and left Control system......
Summary of the content on the page No. 9
Operating Environment Ambient temperature range.................... 0 to 50 °C (Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2. Meets MIL-PRF-28800F Class 3 low temperature limit.) Relative humidity range ......................... 10 to 90%, noncondensing. (Refer to Figure 8 for the correlation between temperature and humidity. Tested in accordance with IEC-60068-2-56.) Storage Environment Ambient temperature range.................... –20 to 60 °C (Tested in accordance with
Summary of the content on the page No. 10
Twb = 39 °C 100 T = 40 °C, 90 H = 90% 80 T = 50 °C, 60 H = 55% T = 60 °C, H = 39% 40 Storage Storage Operation Range Range Range 20 10 -20 0 10 20 30405060 Temperature (°C) Figure 8. Temperature/Humidity Relationship Shock and Vibration Operational shock ...................................10 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC-60068-2-27.) Random Vibration Operating ................................................5 to 500 Hz, 0.31 g rms Nonoperating .................
Summary of the content on the page No. 11
Safety and Compliance Safety This product is designed to meet the requirements of the following standards of safety for information technology equipment: � IEC 60950-1, EN 60950-1 � UL 60950-1, CSA 60950-1 Note For UL and other safety certifications, refer to the product label or visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Electromagnetic Compatibility This product is designed to meet the requirements of the f
Summary of the content on the page No. 12
Environmental Management National Instruments is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial not only to the environment but also to NI customers. For additional environmental information, refer to the NI and the Environment Web page at ni.com/environment. This page contains the environmental regulations and directives with which NI complies, as well a
Summary of the content on the page No. 13
Where to Go for Support The National Instruments Web site is your complete resource for technical support. At ni.com/support you have access to everything from troubleshooting and application development self-help resources to email and phone assistance from NI Application Engineers. National Instruments corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments also has offices located around the world to help address your support ne
Summary of the content on the page No. 14
Important Information Warranty The PMA-1115 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor. The media on which you receive National Instruments software are warranted not to fail to execute programming instructions, due t
Summary of the content on the page No. 15
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, orni.com/patents. © 2
