Summary of the content on the page No. 1
®
JENN-AIR 30" AND 36" (76.2 CM AND 91.4 CM)
TOUCH-ACTIVATED ELECTRONIC
INDUCTION COOKTOP
TABLE DE CUISSON PAR INDUCTION AVEC
®
COMMANDES ÉLECTRONIQUES TACTILES JENN-AIR
DE 30" ET 36" (76,2 CM ET 91,4 CM)
Use & Care Guide
For questions about features, operation/performance, parts, accessories, or service in the U.S.A., call:
1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.com.
In Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca.
Guide d’utilisation e
Summary of the content on the page No. 2
TABLE OF CONTENTS TABLE DES MATIÈRES COOKTOP SAFETY........................................................................2 SÉCURITÉ DE LA TABLE DE CUISSON ....................................15 COOKTOP USE ..............................................................................4 UTILISATION DE LA TABLE DE CUISSON................................17 Induction Cooking........................................................................5 Cuisson par induction ..............................
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electrical shock, ■ Never Leave Surface Units Unattended at High Heat injury to persons, or damage when using the cooktop, follow Settings – Boilover causes smoking and greasy spillovers basic precautions, including the following: that may ignite. ■ CAUTION: Do not store items of interest to children in ■ Glazed Cooking Utensils – Only certain types of glass, cabinets above a cooktop – Children climbing on the glass/ceramic
Summary of the content on the page No. 4
COOKTOP USE This manual covers different models. The cooktop you have purchased may have some or all of the features listed. 30" (76.2 cm) Model JIC4430X A D B C E F G H I L M J K N A. Left rear surface cooking area display F. Low settings K. Heat level slider B. Surface cooking area off G. Sensor Boil L. Right front surface cooking area display C. Heat level display H. Left front surface cooking area display M. Left side bridge D. Right rear surface cooking area display I. Timer display N. Cont
Summary of the content on the page No. 5
36" (91.4 cm) Model JIC4536X C D E A B F G H I J L M N O P K A. Left rear surface cooking area display G. Low settings L. Heat level slider B. Surface cooking area off H. Sensor Boil M. Right front surface cooking area display C. Center surface cooking area display I. Left front surface cooking area display N. Left side bridge D. Heat level display J. Timer display O. Right side bridge E. Right rear surface cooking area display K. Timer (increase/decrease) P. Control lock F. Power on/off Inducti
Summary of the content on the page No. 6
First use or after a power failure: SETTING RECOMMENDED USE After connecting the cooktop to an electrical power supply or after a power failure, the control panel will be locked. An indicator 3 - 5 ■ Range of simmer levels for light above the key icon will be on. To unlock the control panel, simmering with or without a lid. press and hold CONTROL LOCK for 3 seconds. The indicator light will turn off, and the cooktop is ready for use. Melt ■ Melt chocolate or butter. Simmer ■ Simmer sauces.
Summary of the content on the page No. 7
■ For best results, use pots with a diameter between 9½" (24 cm) and 11" (28 cm) for 30" (76.2 cm) models. Use Sensor Boil pots with a diameter between 6½" (17 cm) and 7½" (19 cm) The Sensor Boil function automatically selects the ideal power for 36" (91.4 cm) models. level to boil water and has an audible beep when boiling is ■ Do not use pressure cookers. reached. Sensor Boil is available only on one surface cooking area. See the following illustrations for which surface cooking ■ The q
Summary of the content on the page No. 8
Simmer Keep Warm The Simmer function can be used with all surface cooking areas. Simmer can be used on more than 1 surface cooking area at a WARNING time. Food Poisoning Hazard To Use: Do not let food sit for more than one hour before or To Turn On: after cooking. 1. Check that a surface cooking area has been selected. Doing so can result in food poisoning or sickness. 2. Touch SIMMER. “A” will appear in the display, and the indicator light next to Simmer will light. The Keep Warm function c
Summary of the content on the page No. 9
To Turn Off a Bridge: 30” (76.2 cm) Model JIC4430X 1. Touch the Bridge keypad for the zone being used (left side Performance Boost function is available on only 1 surface bridge or right side bridge). cooking area at a time within a zone. If you attempt to use another surface cooking area in the same zone, “P” and “9” will The surface cooking areas will resume operation as 2 briefly flash in the display before returning to heat setting level 9. separate areas. The surface cooking area that
Summary of the content on the page No. 10
■ For foods containing sugar in any form, clean up all spills and To Use: soils as soon as possible. Allow the cooktop to cool down 1. Check that a surface cooking area has been selected. slightly. Then, while wearing oven mitts, remove the spills 2. Touch BOOST. “P” will appear in the display. while the surface is still warm. If sugary spills are allowed to 3. Touch BOOST keypad when finished. The “P” will no longer cool down, they can adhere to the cooktop and can cause be visible in the
Summary of the content on the page No. 11
The number on the surface cooking area heat setting display will Choose the correct pan size for each surface cooking area. The flash if no pan is placed on the surface cooking area, or the pan is diameter of the pan’s base should correspond to the size of the not made of the right material, or it is not the right size. It will stop surface cooking area. flashing once a suitable pan is placed on the surface cooking NOTE: Cookware manufacturers often give the diameter across area. If you tak
Summary of the content on the page No. 12
TROUBLESHOOTING Try the solutions suggested here first in order to avoid the cost of an unnecessary service call. ■ Is the display flashing “Er” and numbers? If an “Er” and a Nothing will operate series of numbers appear in the display panel, turn power off at the circuit breaker. Turn on again. If problem continues, call ■ Is the cooktop wired properly? See the Installation customer service. See “Assistance or Service” section. Instructions for more information. ■ Is the display flashing “F”
Summary of the content on the page No. 13
ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If Accessories you still need help, follow the instructions below. When calling, please know the purchase date and the complete Cooktop Bracket Adhesive Kit model and serial number of your appliance. This information will (for marble countertop installations only) help us to better respond to your request. Order Part Number W10310006 In the U.S.A. Cook
Summary of the content on the page No. 14
® JENN-AIR COOKING APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Jenn-Air brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Jenn-Air”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Jenn-Air designated service company. This limited warranty is
Summary of the content on the page No. 15
SÉCURITÉ DE LA TABLE DE CUISSON Votre sécurité et celle des autres est très importante. Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer. Voici le symbole d’alerte de sécurité. Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous et à d’autres. Tous les messages de sécurité suivront le symbole d’alerte de
Summary of the content on the page No. 16
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ ■ Utiliser des ustensiles de format approprié – La table de AVERTISSEMENT : Pour réduire le risque d'incendie, de cuisson est munie d’un ou de plusieurs éléments choc électrique, de blessures ou de dommages lors de chauffants de différentes grandeurs. Choisir les ustensiles l'utilisation de la table de cuisson, observer les précautions qui ont un fond plat assez grand pour couvrir l’élément élémentaires suivantes, y compris ce qui suit : chauffant d
Summary of the content on the page No. 17
Cette table de cuisson à induction génère et utilise une énergie de fréquence ISM qui chauffe l’ustensile de cuisson à l’aide d’un champ électromagnétique. Elle a été testée et déclarée conforme à la section 18 du règlement FCC pour l’équipement ISM. Cette table de cuisson à induction satisfait aux exigences du règlement FCC pour la minimisation des interférences avec d’autres dispositifs résidentiels. Cette table de cuisson à induction peut causer des interférences pour la réception de la té
Summary of the content on the page No. 18
Modèle JIC4536X de 36" (91,4 cm) C D E A B F G H I J L M N O P K A. Affichage de la surface de cuisson arrière gauche G. Réglages de chaleur réduite L. Curseur du niveau de chaleur B. Arrêt surface de cuisson H. Ébullition avec capteur M. Affichage de la surface de cuisson avant droite C. Affichage de la surface de cuisson centrale I. Affichage de la surface de cuisson avant gauche N. Liaison de gauche D. Affichage du niveau de chaleur J. Affichage de la minuterie O. Liaison de droite E. Affich
Summary of the content on the page No. 19
REMARQUE : Cette table de cuisson fonctionne également avec Utiliser le tableau suivant comme guide lors du réglage des un courant de 208 volts lorsque l'installation ne fonctionne pas niveaux de chaleur. sur du 240 volts. RÉGLAGE UTILISATION RECOMMANDÉE Première utilisation ou après une panne de courant : Après avoir raccordé la table de cuisson à une source 9 - Boost ■ Porter un liquide à ébullition. d'alimentation électrique ou après une panne de courant, le (optimisation) tableau de comma
Summary of the content on the page No. 20
Modèle JIC4536X de 36" (91,4 cm) Surface de cuisson à dimension double A (sur certains modèles) La surface de cuisson à dimension double offre une flexibilité qui permet d'utiliser des ustensiles de cuisson de différentes tailles. La dimension simple peut être utilisée de la même manière qu’une surface de cuisson ordinaire. La dimension double combine les surfaces de cuisson interne et externe; elle est recommandée pour les ustensiles de cuisson de plus grande dimension, les grandes quant
