Sena 5S user manual

1. Download and install the Sena Device Manager on your computer, which you can find on the official Sena website.
2. Open the Device Manager and connect your Sena 5S device to your computer using a USB cable.
3. Once the device is connected, click on the "Device Recognition" option and your Sena product model (5S) will be shown on the Device Manager.
4. Click on the "Update" button to see if a newer version of firmware is available. If there is, it will show up on the screen.
5. Clicking the "Update" button next to the available new firmware starts the updating process. Please follow the on-screen prompts to complete the update. Do not disconnect the device while the update is in progress as this can cause issues.
6. Once the update is finished, unplug your device and power it on. The device will then speak the current software version to confirm the update was successful.
Remember that updating the firmware will reset all of your settings to factory default. So it’s a good idea to make a note of your settings before doing an update so that they can easily be reconfigured afterwards.

The Sena 5S is a motorcycle Bluetooth communication system. Its main function is to provide riders with a wireless solution for communication on the road. It allows riders to make hands-free phone calls, listen to music, receive GPS navigation instructions, and communicate with other riders in the group using intercom functionality. The Sena 5S also features noise control technology for clear audio quality, and it is designed to be user-friendly and easy to operate while riding.

No, the Sena 5S does not have a built-in radio feature.

To connect your Sena SMH5 to your phone, follow these steps:
1. Make sure both your Sena SMH5 and your phone are charged and turned on.
. On your phone, enable the Bluetooth function. The steps to do this may vary depending on your phone model. Typically, you can find Bluetooth settings in the Settings menu.
3. On the Sena SMH5, press and hold the Jog Dial for about 8 seconds until you hear a voice prompt saying "Intercom pairing."
4. Rotate the Jog Dial until you hear a voice prompt saying "Phone pairing."
5. Tap the Jog Dial once, and the SMH5 will enter Bluetooth pairing mode, indicated by a flashing blue LED light.
6. On your phone, search for available Bluetooth devices. It may be listed as "Sena SMH5" or a similar name. Select it to pair your phone with the Sena SMH5.
7. The Sena SMH5 will emit a voice prompt saying "Your headset is paired" once the connection is successful.
8. You can test the connection by making a call or playing media on your phone. The audio should be transmitted to your Sena SMH5.
Note: The steps provided are general guidelines. If you encounter any issues, refer to the user manual of your specific Sena SMH5 model for detailed instructions.