Sena SMH5-FM user manual

Yes, Sena does have a mobile application that is compatible with the SMH5 headset. The app is called "Sena Utility" and is available for both iOS and Android devices. This app allows you to configure device settings, set groups of intercom friends, and access an interactive quick start guide.

No, the Sena 5S does not have an FM radio feature.

To use the FM radio on your Sena 5S, you can follow these steps:
1. Turn on your Sena 5S by pressing and holding the Center Button for a few seconds until you hear the startup voice prompt.
2. Once the Sena 5S is turned on, press the Center Button once to access the Main Menu.
3. Rotate the Jog Dial clockwise or counterclockwise to navigate through the menu options. Stop when you reach the "FM Radio" option.
4. Press the Center Button once to enter the FM Radio mode. You will hear the voice prompt saying "FM Radio On."
5. To perform an automatic scan for available radio channels, press and hold the Center Button for a few seconds. The Sena 5S will automatically search for the strongest radio signal and store the channels it finds.
6. Once the scan is complete, use the Jog Dial to scroll through the available radio channels.
7. Rotate the Jog Dial clockwise to increase the volume and counterclockwise to decrease it.
8. To manually search for a specific frequency, briefly press the Center Button while in FM Radio mode.
9. Finally, to exit the FM Radio mode, press the Center Button once to return to the Main Menu.
Note: The FM radio feature may not be available in some regions or countries due to regulatory limitations. Also, make sure you have a good signal reception for optimal FM radio performance.