Streszczenie treści zawartej na stronie nr. 1
– 0 –
Streszczenie treści zawartej na stronie nr. 2
Precautions of Use The quality of communication depends on the location and environment of the base and the handset. The 21880 must be kept away from sources of excessive heat (radiators, direct sunlight, etc.) and protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids or with aerosols. To reduce the risk of interference and optimize reception, take particular care to keep it away from the immediate vicinity of window
Streszczenie treści zawartej na stronie nr. 3
connection to an analogue telephone line class TRT3 (telecommunications network voltage). ! Do not use your telephone to notify a gas leak when you are in the vicinity of the leak. It is recommended that you avoid using this device during electrical storms. ThomsonTelecom hereby declares that the 21880 conforms to the essential requirements and other applicable provisions of European directive 1999/5/CE. WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE TH
Streszczenie treści zawartej na stronie nr. 4
Battery Safety Precautions Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. To reduce the risk of fire or personal injury, use only the battery listed in User’s Guide. Keep batteries out of children. Remove batteries if storing over 30 days. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with GP60AAAHC – NiMH 1.2V 600mAh rechargeable battery or e
Streszczenie treści zawartej na stronie nr. 5
Installation Packaging Contents Model: 21880 Solo pack Duo pack* Base stations 1 1 Handsets 1 2 Power plugs 2 3 Telephone line 1 1 Batteries type 2 4 AAA, 1.2V, 600mAh Charging station 1 2 Operating instructions 1+optional 1+optional Please check the contents of the package carefully. If anything is missing or shows signs of transport damage, do NOT put the telephone into service! In such a case, contact either your sales outlet with the purchase receipt. . Connecting the B
Streszczenie treści zawartej na stronie nr. 6
Only use the connection cable supplied. AC power outlet Phone jack Corded unit rear side view CAUTION: Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. Use only the Thomson Telecom power supply that came with this unit. Using other power supplies may damage the unit. Connecting the charging station Insert the power plug in the socket on the rear side of the charging station. Insert the power plug at the other e
Streszczenie treści zawartej na stronie nr. 7
AC power outlet Getting Started Install and Charge the Battery Pack Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. Place the handset in the remote charge unit to charge for 14 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised. Warning: The handset does not work and damaged if the wrong batteries are inserted. – 6 –
Streszczenie treści zawartej na stronie nr. 8
If batteries are empty, handset LCD will not has any display and the handset will not response to any key. Handset is then required to put back on Base Station / Charger cradle to charge. Handset cannot be used until handset name and aerial icon appear. If handset does not charged full before use, handset may emit battery low alert tone and battery level indicator shows empty Features This cordless telephone is equipped with the following features: Digital cordless
Streszczenie treści zawartej na stronie nr. 9
Up to 10 hours continuous call time Operation with 2 standard AAA batteries (Ni-MH) Adjustable flash time *DECT = Digital Enhanced Cordless Telecommunications Menu Structure (Handset) CALL LOG PHONE BOOK NEW ENTRY ENTER NUMBER ENTER NAME NORMAL RING LIST ENTRY VIP RING 1-10 EDIT ENTRY DELETE DELETE ALL CONFIRM? VOLUME [- - - - - ] HANDSET RINGER EXT RING MELODY 1-10 INT
Streszczenie treści zawartej na stronie nr. 10
LANGUAGE ENGLISH DEUTSCH FRANCAIS CESKY TURKCE POLSKI E Λ ΛHNIKA PYCCK ИЙ БЪЛГAPCK И MAGYAR Corded Base Station Set Up TONE/PULSE Dialing A Tone / Pulse switch is located at the base bottom. Default is Tone dialing Flash Time Setting Flash time 600/300/100ms can be selected by a switch located at the base bottom. Note: If you don’t know which setting is correct, check with your phone NOTE: If you don’t know which setting is correct, check wit
Streszczenie treści zawartej na stronie nr. 11
Handset and Base Layouts Menu / down key / ▼ CID key / Asterisk key / * INT / OK INT / OK key Cancel key C Mute key – 10 –
Streszczenie treści zawartej na stronie nr. 12
Redial / Pause key /Up key / P / ▲ External call key. Memory key R Flash key Hash key / lock key # / Handset LCD Display Battery icon Phone icon EXT External call icon INT Internal call icon CLI icon No ring icon Mute icon Key lock icon Aerial icon Up / Down arrow ▲ / ▼ Voice mail waiting indicator (VMWI icon) – 11 –
Streszczenie treści zawartej na stronie nr. 13
Key Description Key symbol Usage 1, 2ABC, 3DEF, 4GHI, For digit entry for dialing and memory 5JKL, 6MNO, 7PQRS, 8TUV, 9WXYZ, *, 0,# – 12 –
Streszczenie treści zawartej na stronie nr. 14
Volume control / select AM or PM in Time VOL/ ▲ / ▼ setting menu Direct memory access M1 For programming phone memory MEM Toggle speakerphone On/Off Last redial number or to enter a pause digit LNR/PAUSE Retrieve the Redial number list / REDIAL ► Browse memory / For selection in MENU Delete a digit in pre-dialing / Delete a record CLEAR when reviewing memory Toggle mute function during conversation MUTE Access line transfer offered by PABX or call FLASH/EXIT waiting offe
Streszczenie treści zawartej na stronie nr. 15
Base LED Description There are following LED for corded base. LED Functions Speakerphone If speakerphone is on, this LED is on. In-Use Light up in conversation. Blink in ringing or after receiving Message Waiting Call in standby mode Base LCD Description This is a two line LCD. First lower line: 12 dot-matrix characters. Second upper line: 8 digits for date time display and 2 digits for number of calls with some icons. Symbol Comment It turns on when the unit is in off-hooked c
Streszczenie treści zawartej na stronie nr. 16
NEW It turns on when there is new Caller ID in the standby. It turns on when the Caller ID record is a new record during CID call log list access REP It turns on when the Caller ID record is a repeated record during CID call log list access CALL It indicates the number of new call in the CID list in standby It indicates the Caller ID record number in the CID list during CID call log list access UP / DOWN It turns on to indicate that the user can press UP/DOWN key to select other
Streszczenie treści zawartej na stronie nr. 17
GREEK; RUSSIAN; BULGARIAN; HUNGARIAN Making Internal Calls IMPORTANT: Internal calls can be made only if more than one handset is registered on the base station. Press [INT/ OK] key during standby mode. Press a digit to specify which handset (1~4) to call to. The other handset will ring with the ‘INT’ icon flashing. When other handset answered, the internal call is established. Press key to end the call. Note: If an external call is received during an internal call, short aco
Streszczenie treści zawartej na stronie nr. 18
Taking Calls When an external call is received, all registered handsets and the base station ring. EXT flashes in the handset display and, if subscribed, the telephone number of the caller appears (network depended). If the caller has been stored in your phone book, the name appears. The incoming call VMWI/LED on the base station flashes. In the case of an internal call or on pressing the paging key on the base station, INT flashes in the handset display. Handset is in the charge unit
Streszczenie treści zawartej na stronie nr. 19
Press or key to select the required subscriber from the phone book. Alternatively, enter the first letter of the name required. Press key. The number is dialed. Note: How to store entries in the phone book is explained in the Chapter “Phone Book”. Call Log Operations IMPORTANT: To use the “Call Log” function, you must subscribe to your network operator’s Caller Line Identification (CLI) service. Browse, Call Back, Delete, Store If calls have been received in your absence, these
Streszczenie treści zawartej na stronie nr. 20
Store: Press key, then press “INT/OK” key to start the NAME entry by keypad. Press “INT/OK” key to confirm. Select the ring tone with or key. Press “INT/OK” key when finish. Note: 1. The CALL LOG icon and display indicator disappear only after browsing through all the entries. 2. It is only possible to enter subscribers in the phone book who has not stored before. Edit Call Log memory When browsing Call Log memory, Caller Line Identification (CLI) number can be edited before dia
