Streszczenie treści zawartej na stronie nr. 1
Table of Contents
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Included with the C35X1 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Important Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 2
Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Use a dry cloth for cleaning without liquid or aerosol cleaners. 4. Do not use this product near water; for example, near a bath tub, wash bow
Streszczenie treści zawartej na stronie nr. 3
12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when following the operating instructions. (Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in dama
Streszczenie treści zawartej na stronie nr. 4
Introduction Congratulations on your purchase of the Uniden XC3 5 0 1 Cordless Telephone. The C35X1 0 is designed to exacting standards which provide reliability, long life, and outstanding performance. Note: This series of Uniden phones is available in designer colors, and these colors are designated by different model numbers. Accordingly, this manual describes the operation of the C35X1 0 , XC3 5 0 1G , C35X1 4 , and the XC3 5 5 1 . Features • 25 46/49 MHz Channels • AutoSecure™ • Random Code
Streszczenie treści zawartej na stronie nr. 5
Q Included with the XC3510 If any are missing or damaged, do not contact the place of purchase. Instead contact Uniden Customer Service at: (800) 297-1023, 8:00 am to 5:00 pm, Eastern Standard Time, Monday through Friday. Handset Base Unit AC Adapter Long Telephone Rechargable Battery Short Telephone Cord Cord Operating Guide Other Printed OMXC3545 Material 5 ® SERI ES
Streszczenie treści zawartej na stronie nr. 6
Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. Your XC3 5 0 1 phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide,
Streszczenie treści zawartej na stronie nr. 7
Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking noises in the Base Unit. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the Base not be plugged into a ci
Streszczenie treści zawartej na stronie nr. 8
Installation Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. (A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.) • Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure there is sufficient space to fully extend the Base Unit antenna
Streszczenie treści zawartej na stronie nr. 9
Connecting the Telephone Cords Consider these safety guidelines before connecting the telephone cords: CAUTION: • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected. • Use caution when installing or modifying telephone lines. Applying Power to the Base Unit All the XC3 5 0 1 phones require a standard electrical outlet (120 volts AC without a switch to interrupt power), and the included AC
Streszczenie treści zawartej na stronie nr. 10
Adapter Safety Feature The AC adapter furnished with this phone may be equipped with a polarized line plug — a plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. Do not alter the shape of the blades of the polarized plug. Note: If you cannot plug the AC adapter into the outlet, contact someone about replacing the outlet. Desk or Tabletop Installation 1. Place the Ba
Streszczenie treści zawartej na stronie nr. 11
2. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. 3. Place the AC Adapter cord inside the molded channel. 4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 11
Streszczenie treści zawartej na stronie nr. 12
5. Plug the other end of the cord into the telephone jack on the wall. 6. Plug the AC Adapter into a standard 120V AC wall outlet. 12
Streszczenie treści zawartej na stronie nr. 13
Placement of the Handset The unique design of your phone allows you to place the Handset on the Base Unit either facedown or in an upright position. The battery is charged in either position. Upright Position for Facedown Position for Handset Handset Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug the AC Adapter into the Base Unit. 13
Streszczenie treści zawartej na stronie nr. 14
2. Place the AC Adapter cord inside the molded channel. 3. Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit. 4. Place the telephone cord inside the molded channel on the bottom of the Base Unit. Then plug the other end of the telephone cord into the modular jack on the wall. 14
Streszczenie treści zawartej na stronie nr. 15
5. Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated. 6. Plug the AC Adapter into a standard 120V AC wall outlet. 15
Streszczenie treści zawartej na stronie nr. 16
Direct Wall Mounting If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone consider the following: • Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Make sure the screws are securely fastened. • Make sure the wall material is capable of supporting the weight of the Base Unit. 1/5 IN. 1. Insert two mounting screws 15 3 ⁄ inc
Streszczenie treści zawartej na stronie nr. 17
3. Place the AC Adapter cord inside the molded channel. 4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 5. Place the cord inside the molded channel on the bottom of the Base Unit. 17
Streszczenie treści zawartej na stronie nr. 18
6. Place the Base Unit on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 8. Plug the AC Adapter into a standard 120V AC wall outlet. 18
Streszczenie treści zawartej na stronie nr. 19
Setting the Handset Retainer The handset retainer holds the Handset in place if your XC3 5 0 1 phone is mounted on a wall. The steps below describe how to remove and replace the retainer so that the tab faces up. 1. Push up on the Handset retainer on the Base Unit, and slide the tab out. 2. Flip the retainer over so the tab faces up. 19 SERIES
Streszczenie treści zawartej na stronie nr. 20
3. Put the retainer back into its slot on the Base Unit. 4. Push down on the Handset retainer until it snaps into place. 20
