Streszczenie treści zawartej na stronie nr. 1
20” Round Tube TV
Téléviseur à tube rond de 20 po
Televisor de tubo de imagen curvo de 20"
DX-R20TV
USER GUIDE
GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIO
Streszczenie treści zawartej na stronie nr. 2
Introduction 2 Introduction Congratulations on your purchase of a high quality Dynex product. Your DX-R20TV represents the state of the art in television design, and is designed for reliable and trouble-free performance. This manual explains how to correctly install, operate, and get the best performance from your television. Read this user guide carefully before installing your television, then keep it near your television for quick reference. Verify that the box contains: • Color televisio
Streszczenie treści zawartej na stronie nr. 3
Safety information 3 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS TV TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important opera
Streszczenie treści zawartej na stronie nr. 4
Safety information 4 • Follow all warnings and instructions marked on the television. • If an outside antenna or cable system is connected to the television, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/ NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge u
Streszczenie treści zawartej na stronie nr. 5
Safety information 5 • For added protection for this television during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect it from the antenna or cable system. This prevents damage to the television due to lightning and power line surges. • Do not overload wall outlets and extension cords, because overloading can cause a fire or electric shock. • Never push objects of any kind into this television through slots
Streszczenie treści zawartej na stronie nr. 6
Features 6 Features Parts and functions Front VOL+ CH+ INPUT MENU VOL CH 2 1 3 4 5 6 7 Item Name Function or control 1 Power indicator Lights green when the power is turned on 2 Remote sensor Receives the signal from the remote control 3 INPUT button Press to select the TV signal source (TV, AV1[S-Video], AV2, Component) 4 MENU button Press to display the on-screen menu 5 VOL-/VOL+ Press to decrease or increase the volume 6 CH-/CH+ Press to select a lower or higher channel 7 Power button Press
Streszczenie treści zawartej na stronie nr. 7
Features 7 Rear (2) R AUDIO L VIDEO (1) L/MONO 2 6 7 1 3 4 5 Item Name Function or control 1 S-Video input jack Connect the S-Video cable from an external video source to this jack 2 AV1 input jacks Connect the Video (Yellow), Audio Left (White), and Audio Right (Red) cables from an external AV source to these jacks 3 AV output jacks Connect the Video (Yellow), Audio Left (White), and Audio Right (Red) cables to an external AV device to these jacks 4 COMPONENT input jacks Connect the Y, C , C
Streszczenie treści zawartej na stronie nr. 8
Features 8 Item Name Function or control 6 headphone jack Connect your headphone cord to this jack 7 AV2 input jacks Connect the Video (Yellow), Audio Left (White), and Audio Right (Red) cables from an external AV source to these jacks Remote control 1 2 3 4 14 5 15 6 16 7 CCD 17 8 DISPLAY 18 9 10 ENTER 11 19 12 13 Item Button Description 1 POWER Press to turn the television on. Press again to turn the television off. 2 INPUT Press this button to select the video input source.
Streszczenie treści zawartej na stronie nr. 9
Features 9 Item Button Description 3 Direct channel Use to directly go to any channel. selection (0-9) 4 Previous channel Press to return to the previous channel selected 5 CH + Press to change to a higher numbered channel set into memory. 6 CH - Press to change to a lower numbered channel set into memory. 7 MUTE To turn off the sound, press this button once. The television is silenced. The muting feature can be turned off by pressing the MUTE button again or by pressing the VOL + button. 8
Streszczenie treści zawartej na stronie nr. 10
Setting up your television 10 Brand Program code RCA 135 One-For-All 0463 Sony 8042 For compatibility with other universal remotes, use the codes listed for Emerson, Memorex, Orion, Sansui, Sylvania, or Zenith. Setting up your television Connecting your television to AC power Use the AC polarized cord provided for operation on AC. Insert the AC plug into a standard 120V 60Hz polarized AC outlet. AC outlet Wider hole and blade Polarized AC plug (one blade is wider than the other.) Notes: - N
Streszczenie treści zawartej na stronie nr. 11
Setting up your television 11 To install batteries in the remote control: 1 Open the battery compartment cover. 2 Install two AAA batteries (not supplied). 3 Replace the battery compartment cover. Battery precautions Follow these precautions when using batteries in this remote control: • Use only the size and type of batteries specified. • Make sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may damage the device. • D
Streszczenie treści zawartej na stronie nr. 12
Setting up your television 12 Effective range of the remote 15 ft. (5 m) Notes: - The remote may not work correctly if there is an obstacle between the remote and the TV. - Operation of the remote may be inconsistent when direct sunlight, incandescent or fluorescent light, or any strong light source shines on the remote sensor of the TV.
Streszczenie treści zawartej na stronie nr. 13
Setting up your television 13 Connecting to an antenna Combination VHF/UHF antenna (single 75 ohm cable or 300 ohm twin-lead wire) or cable TV 75 ohm coaxial cable from antenna, cable wall outlet, or descrambler box - OR - 300-75 ohm Antenna input jack Antenna input jack matching transformer Notes: - We recommend that you use 75 ohm coaxial cable to eliminate interference and noise. - Connect the 75 ohm cable from the combination VHF/UHF antenna, cable wall outlet, or descrambler box to
Streszczenie treści zawartej na stronie nr. 14
Setting up your television 14 Connecting a video source to the AV1 or S-Video (rear panel) input Connect the audio/video cables from the Audio (L and R)/Video terminal on the back of the TV to the Audio (L and R)/Video output terminals on your video equipment (such as a VCR or DVD player). If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the television, you must also connect the audio cords to the AUDIO jacks on the rear of the television. The S-VIDEO cord only
Streszczenie treści zawartej na stronie nr. 15
Setting up your television 15 Connecting a video source to the AV2 (side panel) input (2) Video equipment R To Audio/ Video IN AUDIO TV side panel R W Y L Signal VIDEO To Audio/ Video OUT Audio/ Video cord (not supplied) To view the AV2 video input, press INPUT on the remote repeatedly until AV2 appears on the screen. Connecting a video source to the COMPONENT input If your DVD player has component video out jacks, connect your television to a DVD player using a component video cord. It can
Streszczenie treści zawartej na stronie nr. 16
Using your TV 16 Connecting the television to a VCR for recording or an external audio system You can connect an audio system to the AV output terminals on the back of the TV to enjoy high quality sound. You can also connect a VCR to the AV output terminals to record a program. ( ) 1 To Video OUT To Audio OUT L/MONO Video cord (not supplied) Audio cord (not supplied) To Video IN To Audio IN Audio system VCR for recording Using your TV Turning on your TV To turn your TV on or off: 1 Make su
Streszczenie treści zawartej na stronie nr. 17
Using your TV 17 Warning: The AC plug supplied with this TV is polarized to help minimize the possibility of electric shock. If the polarized AC cord does not fit into a non-polarized AC outlet, do not file or cut the blade. It is your responsibility to have an electrician replace the obsolete outlet. Do not use this plug with an extension cord or other outlet unless the blades can be fully inserted. 3 Press the POWER button on the TV or the remote again to turn off the TV. Note: You can se
Streszczenie treści zawartej na stronie nr. 18
Using your TV 18 Setting up the channels The first time you turn on the television, you should use Auto Program to automatically set up the available channels on your TV. To complete initial television setup: 1 Press MENU on the TV or remote. The MAIN MENU opens. MAIN MENU PICTURE P. LOCK CLOCK PRESET EXTRA 2 Press or to select PRESET, then press or . The PRESET menu opens. PRESET AUTO PROGRAM CH SETUP
Streszczenie treści zawartej na stronie nr. 19
Using your TV 19 3 Press or to select AUTO PROGRAM, then press or . The AUTO PROGRAM submenu opens. AUTO PROGRAM ANTENNA AIR START 4 Press or to select ANTENNA, then press or to select AIR or CABLE. 5 Press or to select START, then press or to start Auto Program. The TV begins to search for, and memorize, all available TV channels. This process takes several minutes. Note: The TV will first memorize analog TV channels. After all available analog channels have been memorized, it beg
Streszczenie treści zawartej na stronie nr. 20
Using your TV 20 2 Press or to select PRESET, then press or . The PRESET menu opens. PRESET AUTO PROGRAM CH SETUP 3 Press or to select CH SETUP, then press or . The CHANNEL SETUP submenu opens. CH SETUP CH NO 2-2 SKIP ON LABEL WGBH-D X 25DB DIG SIGNAL 4 Press or to select a channel number, then press to select SKIP. 5 Press or to set SKIP to ON. The channel you selected is skipped when you use the CH+/- to browse the channels. 6 To restore a skipped channel, use the number buttons to
