Streszczenie treści zawartej na stronie nr. 1
MULTIMEDIA PROJECTOR
MODEL LC-XC1
OWNER’S MANUAL
Streszczenie treści zawartej na stronie nr. 2
LC-XC1 TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read t
Streszczenie treści zawartej na stronie nr. 3
LC-XC1 SAFETY INSTRUCTIONS All the safety and operating instructions should be ventilation is provided. read before the product is operated. Never push objects of any kind into this projector Read all of the instructions given here and retain through cabinet slots as they may touch dangerous them for later use. Unplug this projector from AC voltage points or short out parts that could result in a power supply before cleaning. Do not use liquid or fire or electric shock. Never spill li
Streszczenie treści zawartej na stronie nr. 4
LC-XC1 COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may caus
Streszczenie treści zawartej na stronie nr. 5
LC-XC1 TABLE OF CONTENTS DIRECT OPERATION 23 MENU OPERATION 23 FEATURES AND DESIGN 6 COMPUTER MODE 24 SELECTING COMPUTER MODE 24 PREPARATION 7 SELECTING COMPUTER SYSTEM 24 COMPATIBLE COMPUTER SPECIFICATIONS 25 NAME OF EACH PART OF THE PROJECTOR7 PC ADJUSTMENT 26 SETTING-UP THE PROJECTOR 8 PICTURE IMAGE ADJUSTMENT 28 CONNECTING THE AC POWER CORD 8 NORMAL FUNCTION 29 POSITIONING THE PROJECTOR 9 AUTO IMAGE FUNCTION 29 ADJUSTABLE FEET 10 PICTURE POSITION ADJUSTME
Streszczenie treści zawartej na stronie nr. 6
LC-XC1 FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ Compatibility ♦ • Digital Zoom (Computer Mode only) The Digital Zoom magnifies the image up to 49 This projector widely accepts various video and times, allowing you to focus on crucial computer input
Streszczenie treści zawartej na stronie nr. 7
LC-XC1 7
Streszczenie treści zawartej na stronie nr. 8
LC-XC1 CONNECTING THE AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the project
Streszczenie treści zawartej na stronie nr. 9
LC-XC1 POSITIONING THE PROJECTOR • This projector is designed to project on a flat ROOM LIGHT projection surface. The brightness in the room has a great • The projector can be focused from 4.6’ (1 .4m) influence on the picture quality. It is 47.3’ (1 4.4m), recommended to limit ambient lighting in • Refer to the figure below to adjust the screen order to provide the best image. size. LENS SHIFT ADJUSTMENT The projection lens can be moved up and down with the motor-driven lens
Streszczenie treści zawartej na stronie nr. 10
LC-XC1 ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 9.0 degrees. 1 Lift the front of the projector and pull the FEET LOCK LATCHES on both sides of the projector. 2 Release the FEET LOCK LATCHES to lock the ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to fine tune the position and the tilt. 3 To shorten the ADJUSTABLE FEET, lift the front of the projector and pull and undo the FEET LOCK LATCH
Streszczenie treści zawartej na stronie nr. 11
LC-XC1 This projector has INPUT TERMINALS and OUTPUT TERMINALS on its side for connecting computers and video equipment. Refer to the figure on pages 11 to 14 and connect properly. INPUT TERMINALS 11
Streszczenie treści zawartej na stronie nr. 12
LC-XC1 OUTPUT TERMINALS RESET BUTTON R/C JACK This projector uses a micro processor to control the When using the Wired / Wireless unit. Occasionally, the micro processor may Remote Control Unit as the Wired malfunction and need to be reset. This can be done Remote Control, Connect the Wired by pressing the RESET button with a pen, which will Remote Control Unit to this jack with shut down and restart the unit. Do not use the the Remote Control Cable (supplied). RESET function excessive
Streszczenie treści zawartej na stronie nr. 13
LC-XC1 13
Streszczenie treści zawartej na stronie nr. 14
LC-XC1 14
Streszczenie treści zawartej na stronie nr. 15
LC-XC1 INDICATORS TOP CONTROL 15
Streszczenie treści zawartej na stronie nr. 16
LC-XC1 LASER POINTER FUNCTION This remote control emits a laser beam as the Laser Pointer from the Laser Light Window, When the LASER button is pressed, the laser light goes on. And when the button is pressed more than 1 minute or the button is released, light goes off. Laser light is emitted with the RED light which tells the laser beam being emitted. The laser emitted is a class II laser; therefore, do not look into the Laser Light Window or shine the laser beam on yourself o
Streszczenie treści zawartej na stronie nr. 17
LC-XC1 Remote Control Batteries Installation Remove the battery Slide the batteries into the 3. Replace the 1. 2. • compartment lid. compartment. compartment lid. • • Do not use a new battery with a used battery. • Avoid contact with water or liquid. • Do not expose the Remote Control Unit to moisture, or heat. • Do not drop the remote control unit. • If batteries have leaked on the remote control, carefully wipe the case clean and load new batteries
Streszczenie treści zawartej na stronie nr. 18
LC-XC1 OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON- SCREEN MENU. Refer to the following pages to operate each adjustment in the ON-SCREEN MENU. Move the pointer (see the NOTE below) by pressing POINT button(s) on the TOP CONTROL or the REMOTE CONTROL. Select the item by pressing SELECT button. NOTE: Pointer is the icon on the ON-SCREEN MENU to select the item. See the figures on the section ‘FLOW OF ON-SCRE
Streszczenie treści zawartej na stronie nr. 19
LC-XC1 MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode. MENU BAR IN VIDEO MODE Press MENU BUTTON while in Video Mode. 19
Streszczenie treści zawartej na stronie nr. 20
LC-XC1 TURNING ON THE PROJECTOR 1. Complete the peripheral connections (with Computer, VCR, etc.) before turning on the projector. (Refer to “CONNECTING TO THE PROJECTOR” on Pages 11-~14 for connecting that equipment.) 2 Connect the projector’s AC Power Cord into a wall outlet and turn the MAIN ON I OFF SWITCH to ON. The LAMP indicator lights RED, and the READY indicator lights GREEN. 3 Press the POWER ON-OFF button on the Remote Control Unit or on the Top Control to ON. The LAMP ind
