Streszczenie treści zawartej na stronie nr. 1
OWNER'S MANUAL
ART SERIES
51CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 5120G
5120B
5120S
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4164
Standards Australia
APP No: N17340
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Streszczenie treści zawartej na stronie nr. 2
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents INTRODUCTION Features ...................................................1 NOTES FOR OPERATION C
Streszczenie treści zawartej na stronie nr. 3
INTRODUCTION Features . Hyperband . English/Chinese on-screen menu display . 256 preset channels 2 . Intellectualized I C-bus control . Full function remote control . Sleep timer, ON Timer, OFF Timer . Non-signal blue background display and AUTO-POWER-OFF function . Games, built-in 500 year calendar function . Child Lock function, Channel swap . Program scan function . Program scan function . Five picture modes' setting . AUDIO/VIDEO input & output terminals . Advanced digital picture improvem
Streszczenie treści zawartej na stronie nr. 4
NOTES FOR OPERATION Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please * turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set. Cautions for safety Note: This TV set ca
Streszczenie treści zawartej na stronie nr. 5
Installation Antenna Connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied) When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly. Note: When you connect the outdoor aerial cable to the aer
Streszczenie treści zawartej na stronie nr. 6
Appearance Front view Note: Functions of MENU, TV/AV, VOL+/-, CH+/- are also provided to the remote controller. Back View 4
Streszczenie treści zawartej na stronie nr. 7
Appearance Remote Controller 5
Streszczenie treści zawartej na stronie nr. 8
OPERATION Turning the Power On/Off & Menu Operation . The following describes how to turn the TV on/off using the TV's main switch and the remote controller. To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. 2. If no picture appears on the screen, press the button on the set or on the remote controller to turn the set on and the yellow indicator light up. *Note: If there are no input signals to the TV when the TV set is on, a blue background will appe
Streszczenie treści zawartej na stronie nr. 9
OPERATION Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. To preset channels (ASM) Use the ASM (Automatic Search Memory) function to preset all the active channels in your local area automatically. To enter into the PRESET menu Press the PRESET button to display PRESET the menu on PRESET POS 22 the screen.( Or you can press the MENU button repeated
Streszczenie treści zawartej na stronie nr. 10
OPERATION Tuning in (continued) Use the SEARCH function if desired channels can not be preset with the ASM or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using SEARCH and SKIP functions. To preset channels (SEARCH) SEARCH If ASM can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of SEARCH. 1. Enter
Streszczenie treści zawartej na stronie nr. 11
OPERATION Tuning in (continued) To skip unnecessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected with POS+/- button. PRESET 1. Enter into the PRESET menu, press the POS+/- button to select POS., POS 24 SKIP OFF then select the unwanted program number with BAND UHF the VOL+/- button. FINE AFT ON SEARCH ASM S-RCV OFF PRESET 2. Press the
Streszczenie treści zawartej na stronie nr. 12
OPERATION Tuning in (continued) AFT (Automatic Frequency Tuning) PRESET If picture and sound’s effect of the channel is instead poor by making use POS 22 of FINE, you can correct them by making use of SKIP OFF BAND UHF AFT. Enter into the PRESET menu, press POS+/- FINE AFT OFF button to select AFT, press VOL+/- button to SEARCH select AFT ON. ASM S-RCV OFF Note: If the program is in AFT ON, the position number displayed on the screen will be in green. The setting of colour and sound s
Streszczenie treści zawartej na stronie nr. 13
OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. To watch a TV programme You can select your desired TV program by one of the following methods. Using the direct select buttons (0~9) and --/---button To select a one-digit position number (0-9) 9 Press the 0~9 button directly. AUTO B/G To select a two-digitposition number (10-99) 13 Press --/--- button to display -- on the screen, then press the AUTO channel number. B/G To select a three-digit posi
Streszczenie treści zawartej na stronie nr. 14
OPERATION Convenient Picture and Sound Controls Selectable picture To select the picture mode You can select the picture quality instantly among four preset modes and one user-set mode. Press the P.M button to select the desired picture quality. SOFT STANDARD SOFT, STANDARD , VIVID , LIGHT and PERSONAL VIVID (user-set) can be selected cyclically. LIGHT PERSONAL To set the desired picture quality to the MEMORY position 1. Press the PIC button repeatedly to select the PICTURE desired adjustin
Streszczenie treści zawartej na stronie nr. 15
OPERATION CLOCK SETTING CLOCK menu CLOCK Press the CLOCK button to display the CLOCK menu. (Or press the TIME --:-- MENU button repeatedly to select and highlight CLOCK icon, and press OFF-TIME --:-- VOL+/- button to enter into the CLOCK menu.) ON-TIME --:-- POS - TIME setting Making use of this function can set the current time for the TV. CLOCK Press the POS+/- button to select and highlight TIME. TIME 18:23 Press the VOL- button to set the hour (0~23). Press the OFF-TIME --:-- VOL+ button
Streszczenie treści zawartej na stronie nr. 16
OPERATION System setting SYSTEM menu Press the MENU button repeatly to select and highlight the SYSTEM icon. Press the VOL+ button to enter into the menu of SYSTEM. SYSTEM To select the language for the OSD (on-screen display) SYSTEM Making use of this function can switch the language for the OSD to either CHINESE ENGLISH English or Chinese. B/B ON To switch the OSD language from English to Chinese, NORMAL V.ZOOM C-SYS AUTO press POS+/- button to select CHINESE ( ),press S-SYS B/G VOL+ b
Streszczenie treści zawartej na stronie nr. 17
OPERATION Playing Games In this TV set there are two built-in games: Falling Cube and Millennium Alien. Below we will describe how to make use of them. To enter into Game GAME Press MENU button to select and highlight GAME icon. Press VOL+/- button to enter into GAME SELECT menu. To select Game In GAME SELECT menu, press POS+/- button to GAME SELECT select one of the games, press VOL+/- button to enter FALLING CUBE into the game. MILLENNIUM ALIEN Making use of FALLING CUBE Enter into FALLING
Streszczenie treści zawartej na stronie nr. 18
OPERATION Playing Games (continued) & SLEEP Timer Making use of MILLENNIUMALIEN Enter into MILLENNIUM ALIEN, there are characters "SHOOTING START" flying from right to left. When the characters have flied over, you can begin to shoot. Pressing VOL+ button can move the battleplane on the lower screen rightward, pressing VOL- button can move the battleplane leftward, pressing POS+/- button can shoot the bullet out. When shooting, you should pay attention not to be hurt by opponent’s bullet. Eve
Streszczenie treści zawartej na stronie nr. 19
OPERATION Other functions CALENDAR function(1800-2299) Press MENU button repeatedly to select and highlight CALENDAR CALENDAR icon, press VOL+/- button to enter into calendar interface. Pressing the POS+/- button can check years' calander forward or backward. Pressing the VOL+/- button can check months calendar of some year forward or backward. MAR 2001 SU MO TU WE TH FR SA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 To exit the calendar interface, press RECALL button. 18 19 20 21 2
Streszczenie treści zawartej na stronie nr. 20
OPERATION Other functions (continued) CHANNEL SWAP Making use of CHANNEL SWAP you can reorder the programs in your SWAP favorite order. Press the MENU button repeatedly to select and highlight SWAP icon. Press VOL +/- button to enter into CHANNEL SWAP menu. Press POS +/- button to select "POSITION A: -" item, then input the desired channel number CHANNEL SWAP which you want to swap by pressing "0-9" or "--/---" POSITION A: 5 button. POSITION B :14 EXCHANGE : OK Press POS+/- button to select
