Streszczenie treści zawartej na stronie nr. 1
OWNER'S MANUAL
51CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 5130G
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4164
Standards Australia
APP No: N15959
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Streszczenie treści zawartej na stronie nr. 2
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. CONTENTS Features ............................................................................
Streszczenie treści zawartej na stronie nr. 3
Features Hyperband 2 Intellectualised I C bus control 255 preset channels Automatic channel preset Full function remote control AV input and output terminals Clock/Game/Calendar Digital AFT technology Four picture modes ON timer/OFF timer Channel exchange Safe mode 1
Streszczenie treści zawartej na stronie nr. 4
Important Safety Cautions 1 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. 2 Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. 3 When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth. 4 Avoid exposing the set to di
Streszczenie treści zawartej na stronie nr. 5
! This TV set can operate on an AC power of 240V, 50Hz. You must not use a power supply of any other type. 6 Do not cover the ventilating hole in the cabinet Keep a space of more than 5 cm from the walls to the TV set to ensure adequate ventilation. 7 If the power cord or the plug is damaged contact a qualified service department for service. 8 When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet. 9 Don't try to pu
Streszczenie treści zawartej na stronie nr. 6
Identification of Controls Front POWER SWITCH REMOTE SENSOR INDICATOR INDICATOR 1 2 3 4 5 6 7 1. Earphone Jack AV/TV input terminals (VIDEO, AUDIO L, R). 2. AV/TV button: Video input select. 3. MENU button: To enter into menu operation. 4. VOL- button: volume down adjust; menu item adjust 5. VOL+ button: volume up adjust; menu item adjust. 6. CH- button: channel down select; menu item select. 7. CH+ button: channel up select; menu item select. 4
Streszczenie treści zawartej na stronie nr. 7
Back 4 1 3 2 1. Antenna input 2. S-VIDEO input 3. AV input (VIDEO, AUDIO L/MONO, R) 4. AV output (VIDEO, AUDIO L/MONO, R) 5
Streszczenie treści zawartej na stronie nr. 8
Identification of Controls (continued) Remote Controller Power on/standby Direct channel selector Previous channel Digit select Picture mode select Break Playing game Calendar Undo operation in game Help in menu operations To enter MENU operation Channel up Volume down Volume up Channel down TV/VIDEO input select Sleep timer On-Screen call Sound mute Menu control ! Notes: In most cases, the function CH+/- buttons are equal to the buttons, and the function of VOL+/- buttons are equal to th
Streszczenie treści zawartej na stronie nr. 9
Effective range of the Remote Installing batteries 1 Open the battery cover. 2 0 0 30 30 5m Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. 3 ! Notes: Replace the battery cover. When there is an obstacle between the TV and the ! transmitter, the transmitter may not operate. Notes: When direct sunlight, and incandescent lamp, The battery life should be about one year under fluorescent lamp or any other strong light shines on
Streszczenie treści zawartej na stronie nr. 10
INSTALL the unit in a room where direct light will not fall upon the screen. Installation Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Notes: ! It is recommended that the 75-ohm coaxial ca
Streszczenie treści zawartej na stronie nr. 11
Connect to video and audio equipment This TV set provides AV input terminals for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. Important notes on the AV input terminals Please do not connect and use the side and rear input terminals at the same time. You can connect a stereo system to the AV output terminals on the set to enjoy a high quality sound from the stereo system. The
Streszczenie treści zawartej na stronie nr. 12
In MENU operations, the CH+/- (or ) buttons are used to select item upwards Menu Introduction / or downwards; the VOL+/- (or ) buttons are used to adjust or confirm selected item. Join to page 11 The selected item If the marginal item is selec displays in yellow. Help information for menu To adjust the picture's contr Normal Picture Press MENU To adjust the picture's colour button once To adjust the picture's brigh To adjust the picture's sharp To adjust the picture's skin Press
Streszczenie treści zawartej na stronie nr. 13
Notes: ! In most cases, the function of CH+/- buttons are equal to the buttons; and the function of VOL+/- buttons are equal to the / buttons. Join to page 10 ted and there are some items that are not displayed yet, the or symbol twinkles. perations (Press HELP button to display/cancel this help bar). ast. The Picture menu will be shielded if you set the AdjLimit ! item to Off in SafeMode. tness. ness. colour. (This item is available only in NTSC) To set SafeMode functio
Streszczenie treści zawartej na stronie nr. 14
Turning on/off Turning on 1. Press the Power Switch on the TV set. If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button on the 2. remote controller and the TV set is turned on. 3. In STANDBY mode, you can also press the 1 AV/TV button on the set to turn on. ! Notes: 3 If there is no input signal, then a blueground appears. After 15 minutes, the set auto goes to STANDBY. 2 Turning off Press the Power Switch on the TV set if you
Streszczenie treści zawartej na stronie nr. 15
Select Input Signal Select input signal 1. Press AV/TV button on the TV set or AV button on the remote control. When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals. If you want to switch to TV press AV button again or follow step 2, 3 or 4. 2. Press the digit buttons to switch back to TV mode. 3. Press CH+ or CH- button to switch back to TV 1 3 mode. 4. Press button to switch back to TV mode. 2 5 Press DSP butt
Streszczenie treści zawartej na stronie nr. 16
1. Press MENU button four times to display Program menu. 2. Press CH+/- button to select item. Tuning in 3. Press VOL+/- button to confirm or adjust the selected item. Auto Search Enter the Program menu and select Auto item. Press VOL+ or VOL- button and the TV set starts Auto Channel Preset. All Active channels will be preset and stored into the memory automatically. After presetting, the TV will stop at the last channel program. During the process of Auto channel preset, pressing the MENU or
Streszczenie treści zawartej na stronie nr. 17
Channel Skipping You can skip unnecessary channels by using Skip function when you browse by CH+/- buttons. Please select a channel number with digit buttons or CH+/- buttons. You can also enter program menu, select Display item and adjust with VOL+/- buttons manually to select the desired channel number (from 0~254). For example channel 9. In Program menu, please select Skip item and press VOL+ or VOL- button to select On. Now channel 9 will be skipped when you browse channel by 1 3 2 CH+/- but
Streszczenie treści zawartej na stronie nr. 18
Tuning in (continued) Channel exchange When auto channel preset is finished, you can edit the order of programs by using the channel exchange function. Please enter Program menu and select Target item. Press VOL+ or VOL- button to select a target channel number that you would like to exchange with the current channel. Then select Channel Change item and confirm with VOL+/- buttons. Now the programs in the current channel and target channel will exchange. You can select the current channel in 1 3
Streszczenie treści zawartej na stronie nr. 19
Channel Selection 1. Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press 0-9 direct Press -/-- button 8 channel selector. repeatedly to display "-". To select two-digit channel: Press -/-- button Press 1-9 Press 0-9 18 -- -1 repeatedly to buttons. buttons. display "--". 2 To select three-digit channel: Press -/-- button --- -- 1 -16 168 repeatedly to 1 display "--" 3 Press 1-2 Press 0-9 Press 0-9 buttons. buttons. buttons. Notes: The maximum channel number is 2
Streszczenie treści zawartej na stronie nr. 20
Adjusting Picture 1. Press MENU button to display Picture menu. 2. Press CH+/- button to select item. 3. Press VOL+/- button to adjust the selected item. Item VOL- VOL+ Contrast weaker stronger deeper Color paler Brightness darker lighter Sharpness softer sharper Tint* purplish greenish * Note: The item TINT is for NTSC only. The adjusted settings are stored in the Personal mode. 1 3 2 There are three preset picture modes and one User-set | picture mode. Press the button to select a pic
